Shenzhen KingBoard Technology KTS1301 User manual

Hello! I am an AI chatbot trained to assist you with the Shenzhen KingBoard Technology KTS1301 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
What is the specification of the wireless version?

What is the size of the speaker driver unit?

What is the frequency response range?

What is the signal-to-noise ratio?

What is the FM scan range?

What is the wireless range?

What is the maximum memory capacity for USB/SD?

What is the USB charging specification?

What is the battery capacity?

How long does it take to charge via USB port (PC)?

What is the charging time using the USB port (PC)?

How do I connect to a Bluetooth device?

How do I use the TWS function?

How do I charge the device?

Specification

Wireless version: 5.0+EDR

Speaker driver unit size: 8 NCH

Frequency response: 100Hz-20KHz

Signal to noise ratio: >=85dB

FM scan range: 87.5-108.0Mhz

Wireless range: 10 meter

Max memory USB/SD: 32GB

USB charging: DC 5V/500mA

Battery capacity: 1200mAh

Charging via USB port (PC): 3 hours

Accessory：

Charging cable: 1 piece;

Connect to Bluetooth device

Turn on the unit and switch on your mobile Bluetooth, then search for the speaker mode name and

pair the device.

Once device is paired, Bluetooth will automatically connect when unit is turned on subsequently.

TWS: if people has 2pcs and both of them has TWS function. Then turn on both units, and

press any pcs of the MODE button few second. then 2pcs unit will connect automatically

Note: True wireless stereo function only work in Bluetooth mode.

1. DC 5V: Plug the Micro USB cable to the speaker and connect other end USB port to the power

source. (DC 5V)

2. USB slot: Used to read the Mp3 files

3. TF slot: Used to read the Mp3 files

4. Play/Pause: Under USB/TF/Bluetooth mode, short press for play and pause. Press and hold to

change the RGB flame light mode

5. M: To change mode during USB/TF, Bluetooth, FM and Aux-in mode. Press and hold for TWS

function.

6. PREV: USB/TF/Bluetooth/FM mode: press to move to previous FM channel / track. long press

to decrease the volume.

7. NEXT: USB/TF/Bluetooth/FM mode: press to move to next FM channel / track. long press to

increase the volume.

8. MIC-IN: Connect with the MIC when you need.

9. Led display

Bluetooth

Turn on the speaker, It comes into the Bluetooth mode directly. After pair the device, it can play

the music, Short Press ll to Play/Pause, press and to Prev and Next. Press and

hold the and button to turn down and turn up the Volume

AUX-IN

AUX-IN, use the audio cable plug into AUX jack, press Mto switch to Aux in Mode.Press and

hold the and button to turn down and turn up the Volume.

In the AUX IN mode, it couldn’t shift Prev and Next by Bluetooth speaker, but can control by

connection device.

USB/TF Card

Insert the U flash memory or Micro-TF card into the USB/TF slot. it will read the MP3 format

music automatically. Press ll to Play/Pause, short time press and to Prev. and

Next, press and hold and button to turn down and turn up the Volume

FM Radio

Press M to switch to FM Mode.Short press and to the frequency station. Press the ll

to search the frequency station and record automatically , press and hold and

button to turn down and turn up the Volume.

Charging

Please use the original charging cable to charge,

Red LED on when charging.

Model: KTS-1301

FCC ID : SXX-KTS1301

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1)this device might not cause harmful interence,and

(2)this device must accept any interference receivd ,including interference that might cause

undesired operation.

Federal Communications Commission (FCC) Statement. This device complies with part 15 of the

FCC Rules. Operation is subject to the following twoconditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received,

including interference that may cause undesired operation. Note: This equipment has been

tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide Reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one ormore of the following

measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

•Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications made to this device not expressly approved by Shenzhen

KingBoard Technology Co., Ltd. may void the FCC authorization to operate this device.Note:

The manufacturer is not responsible for any radio or TV interference caused by unauthorized

modifications to this equipment. Such modifications could void the user’s authority to operate

the equipment.

RF exposure statement:

The device compliance RF exposure requirement and can installed and used without

restriction

Shenzhen KingBoard Technology KTS1301 User manual

Other documents