DKS 1815-360-D-3-20 DK Prox Series User manual

DKS
Brand
DKS
Model
1815-360-D-3-20 DK Prox Series
Category
Motorcycle Accessories
Type
User manual

DKS 1815-360-D-3-20 DK Prox Series is a card reader designed to manage an access point using 26-Bit wiegand communication. It uses DK Prox proprietary software. The reader is sealed in epoxy, making it vandal-resistant and ideal for both indoor and outdoor applications. The maximum read range for the device is 6 inches. For optimal performance, do not mount the reader on metal surfaces as this will decrease the read range. The reader requires 0.2 Amp at 12 Volt DC input power. If power is supplied by a plug-in transformer, be sure the output is rated as required and that the transformer is U.

DKS 1815-360-D-3-20 DK Prox Series is a card reader designed to manage an access point using 26-Bit wiegand communication. It uses DK Prox proprietary software. The reader is sealed in epoxy, making it vandal-resistant and ideal for both indoor and outdoor applications. The maximum read range for the device is 6 inches. For optimal performance, do not mount the reader on metal surfaces as this will decrease the read range. The reader requires 0.2 Amp at 12 Volt DC input power. If power is supplied by a plug-in transformer, be sure the output is rated as required and that the transformer is U.

DK Prox CARD READERS INSTALLATION
DoorKing’s DK Prox Card Readers are designed to manage an access point using 26-Bit wiegand communication.
It uses DK Prox proprietary software. Maximum read range varies depending on the model.
The readers are sealed in epoxy, making them vandal-resistant and are ideal for both indoor and outdoor applications.
To achieve optimal performance from the DK Prox card readers, do not mount the reader on metal surfaces. Mounting these readers on a metal surface will decrease
the read range of the device. These readers require 0.2 Amp at 12 Volt DC input power. If power is supplied by a plug-in transformer, be sure the output is rated as
required and that the transformer is U.L. Listed. LED (yellow wire) and Beeper (blue wire) are activated by ground. DO NOT connect these to 12 VDC.
12 VDC power must be available at the card reader (long cable runs
have a voltage drop due to the resistance in the cable). A larger wire
gauge (having less resistance) or a separate UL listed power supply
near the card reader may be required to ensure that 12 VDC power is
available at the card reader or problems may occur.
Installation
Red - Vin (+12VDC)
Black - Ground
Green - Data 0
White - Data 1
Blue - Beeper
Yellow - LED
Wire Descriptions
Remove white plug from wire harness
DoorKing Part Numbers
Copyright 2020 DoorKing
®
, Inc. All rights reserved.
120 S. Glasgow Avenue
Inglewood, California 90301
U.S.A.
1815-300
mullion style card reader
1815-301
single-gang style card reader
1815-302
small card reader
1815-300 Mullion Style
Card Reader Assembly
Maximum Read Range: 6 Inches
1815-301
Single-Gang Style
Card Reader Assembly
Maximum Read Range: 6 Inches
1815-302 Small
Card Reader
Assembly
Maximum Read Range:
3 Inches
Pressure
Fit
Removable
Cover
P
lastic
Wall
Anchor
Pressure Fit
Removable
Cover
Pl
a
st
ic
Wa
ll Anchor
O
R
Single-Gan
g
Box
Single-Gang
Box
not supplied
Pressure Fit
Removable
Cover
Plastic
Wall
Anchor
P1
P2
90 Seri
e
s Faceplate
Remove support bar from logo plate.
Card reader slides on existing stud
and is secured with support bar.
Plastic removable cover is NOT used.
Black
White
Blue
Yellow
Green
Red
13
12
11
14
9
8
7
10
Not used
To 90 Series
Aux Terminal:
14-11 Relay 1
or
10-7 Relay 2
Support Bar
Log
o Plat
e
Connect to
Ground to activate.
DO NOT connect
to 12 VDC.
Relay 1
Relay 2
Endurance Level IV
Line Security Level I
Standby Power Level I
Attack Level I
Single Point Locking Device with Keylocks Level I
Access Control Levels:
Operating Temperature:
32° - 131° F (0° - 55° C)
Humidity Conditions:
5% - 95% RH
1815-360 Issued 8-20
Version A
  • Page 1 1

DKS 1815-360-D-3-20 DK Prox Series User manual

DKS
Brand
DKS
Model
1815-360-D-3-20 DK Prox Series
Category
Motorcycle Accessories
Type
User manual

DKS 1815-360-D-3-20 DK Prox Series is a card reader designed to manage an access point using 26-Bit wiegand communication. It uses DK Prox proprietary software. The reader is sealed in epoxy, making it vandal-resistant and ideal for both indoor and outdoor applications. The maximum read range for the device is 6 inches. For optimal performance, do not mount the reader on metal surfaces as this will decrease the read range. The reader requires 0.2 Amp at 12 Volt DC input power. If power is supplied by a plug-in transformer, be sure the output is rated as required and that the transformer is U.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents