E
Accessories
Welcome Guide
Liquid Freezer 240
www.arctic.ac
Dear Customer,
Thank you for choosing the ARCTIC Liquid Freezer (240).
With this cooler we have maximized the noise/performance ratio of AIO
water coolers. As easy to install as an air cooler, it leaves them in
regards of performance far behind and takes the cooling worries out of
the overclocking equation.
YOU are the centre of ARCTIC. We work hard to approach all angles
from a user's perspective and are fully dedicated to create innovative,
user-friendly and affordable devices. YOUR satisfaction is our ultimate
goal.
In order to assist you even better, we launched a support platform for
Smartphones (support.arctic.ac).
I hope you enjoy your Liquid Freezer and we at ARCTIC look forward to
keep your environment cool and quiet also in the future. If you would
like to share how you use ARCTIC's products please do so at
https://www.facebook.com/ARCTIC.en
ARCTIC is a fully carbon neutral company and your support helps us to
compensate every kilogram of CO we produce.
2
Thank You.
Sincerely,
Magnus Huber
ARCTIC CEO
EN
DE
FR
ES ...
support.arctic.ac/lf240
Flat washer
x 8
Thumb nut
x 4
Screws x 16
MX-4 (0.8 g)
x 1
F
G
Intel 115X standoff
(28 mm) x 4
Intel 2011 standoff
(22 mm) x 4
AMD standoff
(26 mm) x 4
H
Fan Set x 4
I
Backplate (for Intel 115X) x 1
J
Intel retention ring x 1
K
AMD retention ring x 1
1
2
CPU fan
socket on
motherboard
3
Intel
Carefully remove the thermal paste residue using paper tissueCarefully remove the thermal paste residue using paper tissue
4
Apply half of thermal compoundApply half of thermal compound
MX-4 (0.8 g)
x 1
J
Intel retention ring x 1
Preparation
1
2
Flip
1
Installation for Intel 2011(-3)
Installation for Intel Socket 1150, 1155, 1156
F
Intel 2011 standoff
(22 mm) x 4
Thumb nut
x 4
Please pay attention to the pump alignment.
A wrongly aligned pump leads to a conflict with the radiator!
Thumb nut
x 4
4
3
2
I
Backplate
(for Intel 115X) x 1
Please pay attention to the pump alignment.
A wrongly aligned pump leads to a conflict with the radiator!
E
Intel 115X standoff
(28 mm) x 4
1
Stock CoolerStock Cooler
CPU fan
socket on
motherboard
CPU fan
socket on
motherboard
1
Installation for AMD
K
AMD retention ring x 1
Preparation
AMD
3
Carefully remove the thermal paste residue using paper tissueCarefully remove the thermal paste residue using paper tissue
2
Thumb nut
x 4
4
3
Installation of the radiator (Choose airflow direction)
a. Air intake b. Air exhaust
Note: For best cooling performance, we recommend mounting the
fan as an air intake to your PC case.
G
AMD standoff
(26 mm) x 4
Please pay attention to the pump alignment.
A wrongly aligned pump leads to a conflict with the radiator!
2
MX-4 (0.8 g)
x 1
Apply half of thermal compoundApply half of thermal compound
a. Air intake
b. Air exhaust
Screws x 16
Flat washer
x 8
H
Fan Set x 4
H
Fan Set x 4
Flat washer
x 8
Screws x 16
CPU fanCPU fan
Thermal Compound
If the cooler has to be installed a second time, we highly recommend using the MX-4
thermal compound from ARCTIC. Only this compound guarantees optimal
performance in combination with the surface of our heatsinks.
MX-4 is available at http://www.arctic.ac/mx4
Warranty
This ARCTIC product includes a two-year limited warranty. For further information,
please visit http://warranty.arctic.ac
© 2015 ARCTIC (HK) Ltd. All rights reserved.
No part of this manual including the products described in it, may be reproduced,
transmitted, stored in a retrieval system, or translated into any language in any form or
by any means, except documentation kept by the purchaser for backup purpose,
without the express written permission of ARCTIC (HK) Ltd. In no event shall ARCTIC,
its directors or employees be liable for any indirect damages, incidental or
consequential damages arising from any defect or error in this manual or product.
Directive 2002/96/EC about Waste of Electrical and Electronic Equipment
(WEEE)
Waste of Electrical and Electronic Equipment must not be disposed of with
domestic waste.
If the device cannot be used anymore, the user is legally obliged to separate it
from domestic waste and hand it over to a designated collection point of his
community/district.
Thereby it is guaranteed that the Waste of Electrical and Electronic Equipment
is recycled properly and negative impacts for the environment are avoided.
Therefore, electronic devices are marked by this sign.
PKMNL00064A
EC Declaration of Conformity
ARCTIC declares under its sole responsibility that this product is compliant with
the provisions of the electromagnetic compatibility directive (2004/108/EC) and
the Restriction of the use of certain hazardous substances directive
(2011/65/EU). A detailed Declaration of Conformity is available at
http://lf240.arctic.ac#support
Like us on facebook
www.facebook.com/ARCTIC.en
/