Qualler BWM000116K User guide

1

ASSEMBLY INSTRUCTIONS

LOFT AND FULL BED WITH

MOVEABLE BED SIDE

WF286600

If you have any questions, please feel free to contact us.

Email: [email protected]

1. This bed is designed for use only mattress(es) meeting the following specifications on the upper bunk, and lower

bunk:

Bed Type Length Width Thickness

Twin Standard 74” - 75” 38 ¹/ ²” 6''

2. Replacement parts, including additional guardrails, may be obtained from any of our (GIGACLOUD

3. Follow the information on the warnings appearing on the upper bunk bed end structure and on the carton.

4. Always use the recommended size mattresses or mattress supports, or both, to help prevent the likelihood of

entrapment or falls.

5. Surface of the mattress must be at least 5 in. (127 mm) below the upper edge of guardrails.

6. Do not allow children under 6 years of age to use the upper bunk.

7. Periodically check and ensure that the guardrail, ladder, and other components are in their proper position,

8. Do not allow horseplay on or under the bed and prohibit jumping on the bed

9. Always use the ladder for entering and leaving the upper bunk.

10. Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.

11. Use of a night light may provided added safety precaution for a child using the upper bunk.

12. Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed next to the wall,

the guardrail that runs the full length of the bed should be placed against the wall to prevent entrapment

betwen the bed and wall.

13. The use of water or sleep flotation mattresses is prohibited.

14. STRANGULATION HAZARD – Never attach or hang items to any part of the bunk bed that are not

15. Keep these instructions for future reference

17. We recommend assembling your bunk bed on a shipping carton to protect your floor or carpet

18. Be certain all staples are out of the box before beginning assembly on the shipping carton

16. Prohibit more than one person on upper bunk

designed for use with the bed; for example, but not limited to, hook, belts and jump ropes.

Upper bunk (bunk bed and tribed included)

TECHNOLOGY (USA) INC . 18961 ARENTH AVENUS CITY OF INDUSTRY, CA, 91748) dealers

Do not remove warning label from bed.

free from damage, and that all connectors are tight.

! SAFETY WARNINGS !

2

DETAIL VIEW

FB

2A

11

5

3

12

4

1

5

4

14

15

2

18

HB

11

17

8

13

4

6

7

9

10

18

3

PART LISTS

4

3

10

13

5

Side panel - 2pcs

18

Ladder step 4pcs

14

Ladder Right side rail 1pc

Horizontal bar - 4pcs

Upper leg FB - 1pc

6

1

12

Front guard rails 2pcs

Guard rail support 1pc

2

Horizontal bar - 2pcs

Upper leg HB - 1pc Upper leg HB&FB - 1pc

9

Back guard rails 2pcs

11

Back guard rails 1pc

7

15

8

Side rail upper -1pc

17

Upper slat - 14pcs

Ladder Left side rail 1pc

Side rail upper -1pc

Vertical guard rail 2pcs

2A

Upper leg HB&FB - 1pc

4

HARDWARE LISTS

ASSEMBLY TOOLS REQUIRED ( NOT INCLUDED )

PLEASE BE CAREFUL DO NOT DAMAGE THE HOLE

POSITION WHEN YOU USE POWER TOOLS !

Wood dower (30pcs)

Ø10" x 30 mm

(Ø12)1/4" x 30 mm

Hex-Head bolts (6pcs)

#4*20mm

Wood Screws (6pcs)

Hex-Head bolts (16pcs)

Ø1/4" x 80 mm

Horizontal-Hole bolts (18pcs)

Ø1/4" x 9.5.12mm

#4*30mm

Wood Screws (28pcs)

Allen Key (1pc)

(1/4")4.5*58mm

Wood Screws (8pcs)

(Ø15)1/4" x 50 mm

Ø1/4" x 65 mm

Wood Screws (2pcs)

Ø1/4" x 100 mm

Wood Screws (12pcs)

Umbrella Head Screw (6pcs)

Hex-Head bolt (4pcs)

Ø1/4"*30mm

P

A B C

D R Q

GHI

JKL

MNO

5

STEP 1:

FB

5

HB

4

5

4

5

4

5

4

2A

1

5

4

3

4

2

4

6

4

STEP 2:

Q

K

Q

K

12PCS

Q

12

2A

3

4

5

12

2A

3

6

Q

K

4

5

6

STEP 3:

ATTENTION:

PLEASE DON'T

TIGHTEN ALL

BOLTS IN THIS

STEP, JUST

TIGHTEN 80%

R

B

K

B

K

B

K

R

14PCS

A

10PCS 14PCS

RB

A

2A

3

1

2

8

2

1

2A

12

7

9

7

12A

7

STEP 4:

STEP 5:

R

2PCS

2PCS 2PCS

AC

R

C

K

D

F

3PCS

D

A

3

2A

1

2

11

12

8

7

9

7

11

13

10

13

8

STEP 6:

2PCS 2PCS 2PCS

RAB

R

ATTENTION:

PLEASE DON'T

TIGHTEN ALL

BOLTS IN THIS

STEP, JUST

TIGHTEN 80%

STEP 7:

D

K

D

3PCS

4PCS

P

A

1

2

2A

3

8

10

2

11

3

2A

1

2

P

K

8

10

8

10 11

9

13

8

STEP 8: A

16PCS

14

18

J18

4PCS 2PCS

J

8PCS 2PCS

14

LJ

I

G

J

I

GG

A

L

K

17

18

J

STEP 9: G

2PCS

10

G

8

G

STEP 10: H

28PCS

82mm

STEP 1: PULL SIDE

RAIL CLOSE

TOGETHER

ENOUGH TO FIT

THE SLATS

STEP 2: SCREW

ALL SLATS

STEP 3: TIGHTEN

100% ALL

HEXAGON BOLTS

H

O

M

1

2A

3

2A

1

2

O

STEP 11:

11

15

STEP 12:

high loft

bed: must

be fixed to

the wall

1

2A

3

2

1

M

2A

STEP 12:

12

COMPLETED

13

Qualler BWM000116K User guide

This manual is also suitable for

Qualler BWM000116K User guide

Related papers

Other documents