2. Computers & electronics
  3. Networking
  4. PoE adapters
  5. Altronix
  6. NETWAY1P

Altronix NETWAY1P Datasheet

  • Hello! I am an AI chatbot trained to assist you with the Altronix NETWAY1P Datasheet. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Altronix NetWay1P is a single port midspan PoE compliant power injector which provides power and passes
data(e.g. video) for PoE compliant devices. Devices may be located up to 100m (328
ft.) from NetWay1P. A NetWayXT repeater module can be utilized to extend the
distance an additional 100m (328 ft.) for a total range of up to 200m (656 ft.). A
maximum range of 600m (1968 ft.) is possible using multiple repeaters, based on
device port requirement. NetWay1 is capable of supporting non-PoE compliant
fixed IP cameras by utilizing NetWay1512 adapter.
Input:
•24VAC@1.2ampor24VDC@1.2amp.
TP2440plug-intransformer(included).
Data:
•One(1)PoEportprovidespowerandpassesdata
overethernet(CAT5)cableupto100m(328ft.).
•Datarate:10/100Base-Tcompliant.
Output Power:
•Portprovidesupto15.4Wmax.
•IEEE802.3afcompliant.
•48VDC.
•Shortcircuitprotection.
Functions:
•PortstatusLED.
•PoEmanualshutdown
(ForUL60950-1applicationsonly).
•Autodetectionandprotectionoflegacy
non-PoEcameras/devices.
Electrical:
•Operatingtemperature:0ºCto49ºCambient.
•11BTU/Hr.
•SystemACinputVArequirement:28.8VA.
Mechanical:
•LightweightmoldedAcrylonitrileButadineStyrene
enclosure is RoHScompliant.
•Compactinsulatedhousing.
•Springterminals(inputandPoEshutdown).
•Dimensions(WxLxHapprox.):
2.5”(63.5mm)x3.8”(96.52mm)x1”(25.4mm)
•Productweight(approx.):2.79lbs.(0.7kg.).
•Shippingweight(approx.):3.15lbs.(0.73kg.).
Accessories:
NetWay1512:
•13Wadapterfornon-PoEcompliantIPcameras.
NetWayXT:
•PoErepeatermoduleextendsrange100m(328ft.).
NetWay1P - Single Port PoE Injector
for Standard Network Infrastructure
Rev.DSNetWay1P_12292011
Overview
Specifications
Typical Application:
Structured
Cable from
Network
Switch
24VAC/
24VDC
Input
12VAC to 24VAC or
5VDC to 24VDC input
for PoE Shutdown
Structured
Cable to
IP Camera
24VAC/VDC
Input
IN
OUT
Power
Shutdown
Port
Status
General Signaling
Equipment 92R2
I.T.E. 43KC
NetWay1
Single Port Injector (Midspan)
24VAC/VDC, 1.2A Input
48VDC 15.4W max. per IEEE 802.3af
www.altronix.com
Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com
Agency Approvals
EuropeanConformity
ULListedforAccessControlSystems
(UL294).
CULListed-CSAStandardC22.2
No.205-M1983,SignalEquipment.
UL/CULListedforInformation
TechnologyEquipment(UL60950-1).
®
NetWay1
/