2. Altronix
  3. NETWAYXT
NETWAYXT

Altronix NETWAYXT User manual

  • Hello! I am an AI chatbot trained to assist you with the Altronix NETWAYXT User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the maximum range that can be achieved using multiple NetWayXT repeaters?
    Does NetWayXT require external power?
    What type of structured cable is needed to connect the NetWayXT to NetWay midspans and PoE devices?
    What is the purpose of the port status LEDs on the NetWayXT?
    What does the green LED on the NetWayXT indicate?
    What is the function of the yellow LED on the NetWayXT?
NetWayXT - 1 -
Overview:
Altronix NetWayXT repeater modules interface with NetWay midspans to extend data (video) an additional 100m (328 ft.).
A maximum range of 600m (1968 ft.) is possible using multiple repeaters, based on camera/device port requirement.
Specifica tions:
Installation Instructions:
NetWayXT is not intended to be connected to outside plant leads.
1. Mount NetWayXT in desired location utilizing the mounting hole (Fig. 1a, pg. 1). Use a proper fastener and/or wall
anchor when securing NetWayXT to the wall.
2. Connect structured cable from port marked [OUT] on NetWay1/NetWay8/NetWay8M/NetWay16 or NetWay16M to
port marked [IN] on the NetWayXT (Fig. 1b, pg. 1).
3. Connect structured cable from port marked [OUT] on NetWayXT to the PoE camera/device or next NetWayXT
repeater (Fig. 1b, pg. 1, Figs. 2-4, pg. 2 ).
4. Port status LEDs will illuminate on NetWayXT indicating the port is operational
(Fig. 1b, pg. 1, refer to Port LED definitions on pg. 1).
5. Power LED will illuminate indicating 12VDC output (Fig. 1b, pg. 1).
Port LED definitions for NetWayXT repeater:
Status Green LED Yellow LED
OFF Indicates it is connected as 10Base-T or no link. Indicates no link.
ON Indicates it is connected as 100Base-TX. Indicates a link.
Blinking ------- Indicates activity.
Fig. 1 Fig. 1a
Fig. 1b
• UL/CULListedforInformation
Technology Equipment
(UL 60950-1).
• CEapproved.
• Repeatermoduleextendsrange100m(328ft.)each.
• PortstatusLEDs.
• Compactinsulatedhousing.
• Plug-and-playinstallation.
• Autodetectionandprotectionoflegacynon-PoEcameras.
• Noexternalpowerrequired.
• CompatiblewithNetWay1/NetWay8/NetWay8M/
NetWay16 and NetWay16M.
NetwayXT
Repeater
IN
OUT
Power
Power
LED
Structured Cable from
NetWay1,
NetWay8, NetWay8M,
NetWay16, NetWay16M
or last NetWayXT
Structured
Cable to
PoE Camera/
Device or
next NetWayXT
Port Staus
LEDs
www.altronix.com
I.T.E. 43KC
NetWayXT - Repeater
®
Rev. 042409
- 2 - NetWayXT
Typical Applications:
Fig. 2 - NetWayXT connected to NetWay1 Single Port Midspan Injector.
Fig. 3 - NetWayXT connected to NetWay8, NetWay8M, NetWay16 or NetWay16M Midspan.
Fig. 4 - Connecting several NetWayXTs on a single port.
Altronix is not responsible for any typographical errors.
140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: 718-567-9056
website: www.altronix.com, e-mail: [email protected], Lifetime Warranty, Made in U.S.A.
IINetWayXT G25M
Video Monitor
NVR/Network Server
Network Switch
NetwayXT
Repeater
www.altronix.com
24VAC/
24VDC
input
Netway1
Single Port
Injector
(Midspan)
Port
Status
www.altronix.com
PoE Camera
CAT-5 100m (328 ft.)
CAT-5
100m (328 ft.)
NetWay1 NetWayXT
Port
shutdown
input
I.T.E. 43KC
I.T.E. 43KC
MEMBER
Video Monitor
NVR/Network Server
Network Switch
CAT-5
100m (328 ft.)
CAT-5
100m
(328 ft.)
PoE Camera
CAT-5
100m (328 ft.)
CAT-5
100m
(328 ft.)
PoE Camera
NetWayXT
NetWayXT
NetWayXT NetWayXT
CAT-5
100m (328 ft.)
CAT-5
100m (328 ft.)
CAT-5
100m
(328 ft.)
PoE Camera
NetWay
Midspan
CAT5
100m
CAT5
100m
CAT5
100m
CAT5
100m
CAT5
100m
CAT5
100m
NetWayXT
1
NetWayXT or
PoE Camera
(6W or less)
2
NetWayXT or
PoE Camera
(4W or less)
3
NetWayXT or
PoE Camera
(<3W or less)
4
NetWayXT or
PoE Camera
(<1.5W or less)
5
PoE
Camera
(Requires local
power)
/