Snap-On DIAGNOSTIC THERMAL IMAGER Quick start guide
- Type
- Quick start guide
diagnostics.snapon.com
DIAGNOSTIC
THERMAL IMAGER
QUICK START GUIDE
BC
°F
231
357
184
Controls and Features
2. Point the Thermal Imager at the
desired object(s).
Use the target in the center of the screen
to make “spot” temperature
measurements.
3. Press the Screen Capture Trigger, to
save an image of the active screen.
Getting Started
Imager
Window
No / Cancel
Button
Yes / Accept
Button
Menu
Button
Power
(On/Off)
Button
microSD
Card Slot
micro USB
Jack
Screen
Capture
Trigger
Temperature
(Target)
Measurement
Display
Target
Color
Pallet
Indicator
Display
Battery
Cover
1. Press and release the Power Button, to turn on the Thermal Imager.
°F
61
83
55
Battery
Level
Icon
Up/Down
Directional
Buttons
Left/Right
Directional
Buttons
Battery
Charging
LED
Images are automatically saved, and
can be viewed in the gallery, or transfered
to your PC using the USB cable.
85
°F
72
57
7. When finished, select the N button to
return to the Expert Tips menu, or select
the Menu button to return to imager
mode.
4. Press the Menu
button to open the menu.
Battery Charging
Powertrain & Exhaust
Body & Electrical
Chassis & Brakes
Menu Navigation
Left/Right - navigate the toolbar
Up/Down - navigate the menu
options
Y - make (accept) selection
N - cancel selection
5. Select the Expert Tips icon.
Use the control buttons to navigate, and
select the desired function or menu option.
6. Select the applicable vehicle system,
and component from the menu options
to display available Expert Tips.
1. C
onnect the supplied USB cable to the micro USB jack on the top of the Thermal Imager,
and to the USB power supply adapter.
2. Connect the USB power supply adapter to a live power source.
The battery charging LED will turn on, and the battery level icon will display as
indicating the battery is charging.
Expert Tips - view experience-
based troubleshooting tips
Gallery - view saved images
Settings - adjust device settings
Toolbar Icons
Delete - delete saved images
i
i
HVAC
Heated Seat
Power Distribution
TIP: Press Y to show/hide text
Heated Seat Troubleshooting
Check for cold spots in the element
Elements should radiate heat uniformly
Possible causes include defective elements,
Switches and relays
i
i
i
Typical Applications
User Manual
The user manual is included on the microSD card. Connect to your PC via USB to
access the manual located in the Manuals folder. The manual is also available on
our website: diagnostics.snapon.com/usermanuals
Customer Support
Phone: (800) 424 7226
E-mail: [email protected]
Website: diagnostics.snapon.com
Snap-on is a trademark, registered in the United States and other countries, of Snap-on Incorporated. All other marks are trademarks or registered
trademarks of their respective holders. ©2016 Snap-on Incorporated. All pictures and illustrations shown are for reference purposes only.
All information including specifications herein are subject to change without notice. ZEETH300A1 Rev. D
Warranty Registration
Please register your warranty online at:
U.S. Customers - store.snapon.com/ProductRegistration.aspx
Canadian Customers - www.snapon.com/productregistration
Is the rear
window
defroster
working?
°F
78
81
52
°F
69
81
53
Which
cylinder is
misfiring?
°F
280
334
69
°F
325
356
75
Known Good Known Bad
Which
heated seat
is not
working?
85
°F
72
57
79
°F
57
52
-
1
-
2
-
3
-
4
Snap-On DIAGNOSTIC THERMAL IMAGER Quick start guide
- Type
- Quick start guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Snap-On Elite Quick start guide
-
-
-
-
-
-
-
-
-