Havis-Shields 1995-2007 Ford Crown Victoria Trak-Mount Kit C-TM-CV User manual

Havis-Shields
Brand
Havis-Shields
Model
1995-2007 Ford Crown Victoria Trak-Mount Kit C-TM-CV
Type
User manual

This manual is also suitable for

Havis-Shields 1995-2007 Ford Crown Victoria Trak-Mount Kit C-TM-CV

This Trak-Mount Kit is designed to provide a secure and convenient mounting solution for various equipment, such as consoles and control heads, in 1995-2007 Ford Crown Victoria vehicles. It offers a versatile and customizable platform that can be tailored to specific needs and preferences.

The kit includes a Trak Plate with multiple ¼” hardware slots, allowing for flexible equipment placement. The Front and Rear Hump Brackets provide a sturdy base for mounting the Trak Plate, ensuring stability and durability. The included hardware, such as hex head bolts, serrated nuts, flat washers, and split lock washers, ensures a secure and rattle-free installation.

Havis-Shields 1995-2007 Ford Crown Victoria Trak-Mount Kit C-TM-CV

This Trak-Mount Kit is designed to provide a secure and convenient mounting solution for various equipment, such as consoles and control heads, in 1995-2007 Ford Crown Victoria vehicles. It offers a versatile and customizable platform that can be tailored to specific needs and preferences.

The kit includes a Trak Plate with multiple ¼” hardware slots, allowing for flexible equipment placement. The Front and Rear Hump Brackets provide a sturdy base for mounting the Trak Plate, ensuring stability and durability. The included hardware, such as hex head bolts, serrated nuts, flat washers, and split lock washers, ensures a secure and rattle-free installation.

INSTALL INSTRUCTIONS C-TM-CV
1995-2007 FORD CROWN VICTORIA TRAK-MOUNT KIT
TOOLS REQUIRED:
Ratcheting Wrench
Metric Socket Set
Standard Socket Set
Tape Measure
HARDWARE:
QTY DESCRIPTION PART#
10 ¼” x ¾” Hex head bolt GSM33001
6 ¼” Serrated nut GSM30023
4 ¼” Flat washer GSM31005
4 ¼” Split lock washer GSM31026
SUB ASSEMBLY:
1. MOUNT TRAK TO HUMP BRACKETS.
• Determine location that Trak will land on transmission hump for the specific
application.
• With Trak in necessary location, measure Front and Rear Hump Bracket in relation to
Trak.
• Bolt trak to the front hump bracket, top plate using measurements taken in previous
step. Use (4) ¼-20 x ¾” Hex head bolts and serrated nuts.
Note: There are 2 different sides to the Trak Plate. It is recommended to mount Hump brackets to
side of Trak Plate that has ¼” hardware slots closer together, to better accept equipment, (consoles,
control heads, etc)
Trak Mount
Rear Hump
Brackets (C-B16)
Front Hump
Bracket (C-B33)
¼” Hardware
Slots
TRAK-MOUNT ASSEMBLY
C-TM-CV-INST-2-07
2
• Attach trak to rear hump bracket using (2) ¼-20 x ¾” Hex head bolts and serrated
nuts.
Note: There is a driver and passenger side bracket to the Rear Hump Bracket. Top of
brackets will be parallel to the transmission hump.
INSTALLATION:
1. REMOVE SEATS:
• Remove rear seat base nuts (18mm).
• Slide seat to rear most position.
• Remove front seat base bolts (13mm).
• Seats do not have to come out of vehicle, they will just need to be tilted out of way to
place Trak-Mount assembly. Be careful of wire plugs if vehicle has power seats.
2. MOUNT ASSEMBLED TRAK-MOUNT:
• Attach the driver and passenger side front hump brackets to the inner front seat bolts.
• Place Trak-Mount assembly so rear hump bracket are between floor of vehicle and
seat base.
• Re-mount seats assembly and tighten all hardware.
• Mount equipment (consoles, control heads, etc).
Front Hump
Bracket
Rear Hump
Bracket
(Pass. Side)
Rear Hump
Bracket
(Driver Side)
Trak
  • Page 1 1
  • Page 2 2

Havis-Shields 1995-2007 Ford Crown Victoria Trak-Mount Kit C-TM-CV User manual

Havis-Shields
Brand
Havis-Shields
Model
1995-2007 Ford Crown Victoria Trak-Mount Kit C-TM-CV
Type
User manual
This manual is also suitable for

Havis-Shields 1995-2007 Ford Crown Victoria Trak-Mount Kit C-TM-CV

This Trak-Mount Kit is designed to provide a secure and convenient mounting solution for various equipment, such as consoles and control heads, in 1995-2007 Ford Crown Victoria vehicles. It offers a versatile and customizable platform that can be tailored to specific needs and preferences.

The kit includes a Trak Plate with multiple ¼” hardware slots, allowing for flexible equipment placement. The Front and Rear Hump Brackets provide a sturdy base for mounting the Trak Plate, ensuring stability and durability. The included hardware, such as hex head bolts, serrated nuts, flat washers, and split lock washers, ensures a secure and rattle-free installation.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents