HN.12.NA.02 • Rev BA • Sep 2013
Features Hayes Industrial Brake, INC, who manufacture
these brakes drew the attention of Danfoss to
this braking system and its application
possibilities.
The mechanical braking concept is seen as an
alternative to our range of motors with
integrated brakes.
Danfoss neither manufactures nor distributes
these disc brakes and therefore cannot be held
responsible for quality and warranty obligations.
For further information on the disc brakes, please
contact:
HAYES INDUSTRIAL BRAKE, INC.
5800 W.Donges Bay Rd., Mequon, Wi 53092
(414)242-4300 • Fax.(414)242-0524
Tech Note
Hydraulic motor with
mechanical disc brake
Danfoss hydraulic wheel motors can be fitted
with specially developed mechanical disc
brakes.
The brakes are for applications where, for
example, vehicles require a secondary
mechanical brake.
MAKING MODERN LIVING POSSIBLE
Phased Out Products
/
