Cleveland
™
P
roject ________________________________
Item __________________________________
Quantity _______________________________
F
CSI Section ____________________________
A
pproval _______________________________
D
ate __________________________________
1333 East 179 St.,
Cleveland, Ohio, U.S.A. 44110
Tel: 1-216-481-4900
Fax: 1-216-481-3782
Web Site: www.ClevelandRange.com
Email: Steam@ClevelandRange.com
COOK CHILL SYSTEMS
Cook/Chill Systems
SECT. XIV PAGE 55
0609
VACUUM CLIPPER
MACHINES
Cleveland Standard Features
I Single Station, automatic, hand activated System
I Able to handle random sizes and weights
I Vertical mounted Clipper with automatic Clip feeding
mechanism, Safety shut-off Valve and Air Pressure Gauge
I Vacuum Pump and Controls Mounted in Stainless Steel
Cabinet
I System complete with: Air Filter, Regulator and Pneumatic
Lubricator
I Easy removable Waste Container
I Adjustable Clip crimping Control and Clipping Cycle
I One continuous Operation: draws Vacuum, gathers Casing
Neck, clips and cuts Tailing
I Cabinet with adjustable Table Top, hinged Front and Side
Doors
I Accepted for use in U.S.D.A. Inspected Facilities
Options & Accessories
Ë Casters
Ë Clips
Ë Labels
MODEL:
CVW
Shall be Cleveland Model CVW, Vacuum packaging system,
Stainless Steel Cabinet, housing pneumatic Controls and
On/Off Switch, vertical mounted Clipper with automatic Clip
feeding, safety shut-off and Air pressure Gauge. Air Filter, Air
regulator and pneumatic Lubricators. Cabinet with adjustable
Table Top, and hinged front and side Doors.
Short Form Specifications
Cleveland Standard Features
I Single station, hand activated vacuum packaging system
I Able to handle random sizes and weights
I Open base stainless steel cabinet
I Horizontal mounted Clipper
I Vacuum pump assembly complete with air filter, regulator
and pneumatic lubricator
I Easily removable waste container
I Tabletop mounted Goose-neck pipe with vacuum nozzle
and gauge
I Accepted for use in U.S.D.A. Inspected Facilities
Options & Accessories
Ë Casters
Ë Clips
Ë Labels
MODEL:
CV-E-8065
Shall be Cleveland Model CV-E-8065, Vacuum packaging system,
Stainless steel open stand with vacuum pump, horizontal mounted clipper,
goose-neck assembly with vacuum gauge and hand activated nozzle.
Short Form Specifications
Cleveland Range reserves right of design improvement or modification, as warranted.
SECT. XIV PAGE 56
0609
Litho in USA
MINIMUM CLEARANCE
FRONT 36"
SIDE 12"
REAR 12"
UTILITIES
MODEL AIR ELECTRICAL
CVW 15 CFM, 90 to 110 PSI 120V/1PH – 10 amps
cord and plug
MODEL AIR ELECTRICAL
CV-E-8065 15 CFM, 90 to 110 PSI 120V/1PH – 10 amps
cord and plug
D
1 D
2
B
D
1 D
2
B
D
1 D
2
B
D
1 D
2
B
(NOT TO SCALE)
/
