MANUZOID
Explore
Explore
Bookmarks
Polycom
RMX 1500
Polycom RMX 1500 Administrator's Manual
Type
Administrator's Manual
Brand
Polycom
Size
17.08 MB
Category
Software
Pages
1098
Language
English
View document
Polycom RMX 1500 Administrator's Manual
Type
Administrator's Manual
Brand
Polycom
Size
47.50 MB
Pages
844
Language
English
View document
Polycom RMX 1500 Deployment Manual
Type
Deployment Manual
Brand
Polycom
Size
6.43 MB
Category
Video conferencing systems
Pages
156
Language
English
View document
Polycom RMX 1500 Getting Started Manual
Type
Getting Started Manual
Brand
Polycom
Size
12.15 MB
Category
Video conferencing systems
Pages
209
Language
English
View document
Polycom RMX 1500 Getting Started Manual
Type
Getting Started Manual
Brand
Polycom
Size
3.86 MB
Category
Video conferencing systems
Pages
192
Language
English
View document
Polycom RMX 1500 Installation & Configuration Manual
Type
Installation & Configuration Manual
Brand
Polycom
Size
274.05 KB
Pages
20
Language
English
Table of contents
RMX® 1500 Installation & Configuration Guide
1
General Safety Precautions
1
Preparations
1
Unpacking the RMX
2
Management Network Configuration on the USB Key
2
The system is shipped with the following default IP addresses:
2
6 Click OK.
3
7 Remove the USB Key from the PC. The USB key is required for first entry power-up of the RMX.
3
Installing the RMX
3
8 You can install it either in a rack or place it on a flat surface:
3
9 Connect the following cables to the RMX rear panel:
4
First Entry Power-up
4
10 Insert the USB key with the modified IP addresses in the USB port on the front panel.
4
11 Power the RMX ON. The parameters in the lan.cfg file are uploaded from the USB key to the RMX’s memory and applied during the power-up sequence.
4
Product Registration and Activation Key Retrieval
5
Before starting the initial configuration process, register the RMX at the Polycom Resource Center website and download the product activation key file to the computer you will use for the configuration:
5
1 Using a Web browser, connect to http://portal.polycom.com.
5
2 Login with your Email Address and Password or register as a new user.
5
3 Select the Product Registration link.
5
4 Follow the on-screen instructions for Product Registration and Product Activation. (The RMX’s serial number is on a sticker on the back of the unit, if needed.)
5
5 Write down the Product Activation Key number or copy it for later use.
5
Connecting to the MCU
5
1 Start the RMX Web Client application on the workstation by entering in the browser’s address line the IP Address of the control unit as defined in the USB key in the format: http://<Control Unit IP Address> and pressing Enter.
5
2 Once the RMX Web Client Welcome screen is displayed, you can remove the USB key from the RMX.
5
4 In the Activation Key field, enter or paste the Product Activation Key retrieved earlier and click OK.
5
Configuring the IP Network Service
6
1 In the Fast Configuration Wizard - IP dialog box, define the following parameters:
6
2 Click Next.
7
3 In the Fast Configuration Wizard - Routes dialog box, enter the IP address of the default router.
7
4 Click Next.
7
5 Enter the required DNS information in the dialog box.
7
7 In the Fast Configuration Wizard - Environment dialog box, select the IP Network Type: H.323, SIP or H.323 & SIP.
8
8 Click Next.
8
11 Click Next.
9
13 In the Fast Configuration Wizard - SIP dialog box, enter the following information:
9
15 Enter the required Security information in the dialog box.
10
16 Click the Save & Continue button.
10
17 Define the following parameters:
11
18 Click Next.
11
19 In the PRI Settings dialog box, define the following parameters:
12
20 Click Next.
12
21 In the Span Definition dialog box, define the following parameters:
13
26 Optional. Repeat steps 23 to 25 to define additional dial-in ranges.
14
27 Enter the MCU CLI (Calling Line Identification).
14
28 Click Save & Continue.
14
After clicking Save & Continue, you cannot use the Back button to return to previous configuration dialog boxes.
14
29 Click OK to continue the configuration.
14
The Spans dialog box opens displaying the following read-only fields:
14
31 Click Next. The System Flags dialog box is displayed.
15
32 In the Fast Configuration Wizard - System Flags dialog box, enter the following information:
15
33 Click Save & Close. The RMX confirms successful configuration.
16
34 In the Success Message box, click OK.
16
35 In the Reset Confirmation dialog box, click Yes.
16
User Definition
17
To add a new user to the system:
17
1 In the RMX Management pane, click the Users option. The Users pane appears.
17
2 Click the New User button or right-click anywhere in the pane and then click New User.
17
3 In the User Name text box, enter the name of the new user. This is the login name used by the user when logging into the system.
17
4 In the Password text box, enter the new user’s password. This will be the user’s password when logging into the system.
17
5 In the Authorization Level list, select the user type which determines the application display and functionality.
17
6 Click OK.
17
To delete a user from the system:
17
Selecting the RMX Web Client Languages
18
To customize the Multilingual Setting:
18
Conferencing Entities
18
Connecting to a Conference Directly or via Entry Queue
19
H.323 Participants
19
SIP Participants
19
ISDN/PSTN Participants
20
Conference Control Using DTMF Codes
20
View document
Polycom RMX 1500 Installation & Configuration Manual
Type
Installation & Configuration Manual
Brand
Polycom
Size
210.03 KB
Category
IP phones
Pages
20
Language
English
Table of contents
RMX® 1500 Installation & Configuration Guide
1
General Safety Precautions
1
Preparations
1
Unpacking the RMX
2
Management Network Configuration on the USB Key
2
The system is shipped with the following default IP addresses:
2
6 Click OK.
3
7 Remove the USB Key from the PC. The USB key is required for first entry power-up of the RMX.
3
Installing the RMX
3
8 You can install it either in a rack or place it on a flat surface:
3
9 Connect the following cables to the RMX rear panel:
4
First Entry Power-up
4
10 Insert the USB key with the modified IP addresses in the USB port on the front panel.
4
11 Power the RMX ON. The parameters in the lan.cfg file are uploaded from the USB key to the RMX’s memory and applied during the power-up sequence.
4
Product Registration and Activation Key Retrieval
5
Before starting the initial configuration process, register the RMX at the Polycom Resource Center website and download the product activation key file to the computer you will use for the configuration:
5
1 Using a Web browser, connect to http://portal.polycom.com.
5
2 Login with your Email Address and Password or register as a new user.
5
3 Select the Product Registration link.
5
4 Follow the on-screen instructions for Product Registration and Product Activation. (The RMX’s serial number is on a sticker on the back of the unit, if needed.)
5
5 Write down the Product Activation Key number or copy it for later use.
5
Connecting to the MCU
5
1 Start the RMX Web Client application on the workstation by entering in the browser’s address line the IP Address of the control unit as defined in the USB key in the format: http://<Control Unit IP Address> and pressing Enter.
5
2 Once the RMX Web Client Welcome screen is displayed, you can remove the USB key from the RMX.
5
4 In the Activation Key field, enter or paste the Product Activation Key retrieved earlier and click OK.
5
Configuring the IP Network Service
6
1 In the Fast Configuration Wizard - IP dialog box, define the following parameters:
6
2 Click Next.
7
3 In the Fast Configuration Wizard - Routes dialog box, enter the IP address of the default router.
7
4 Click Next.
7
5 Enter the required DNS information in the dialog box.
7
7 In the Fast Configuration Wizard - Environment dialog box, select the IP Network Type: H.323, SIP or H.323 & SIP.
8
8 Click Next.
8
11 Click Next.
9
13 In the Fast Configuration Wizard - SIP dialog box, enter the following information:
9
15 Enter the required Security information in the dialog box.
10
16 Click the Save & Continue button.
10
17 Define the following parameters:
11
18 Click Next.
11
19 In the PRI Settings dialog box, define the following parameters:
12
20 Click Next.
12
21 In the Span Definition dialog box, define the following parameters:
13
26 Optional. Repeat steps 23 to 25 to define additional dial-in ranges.
14
27 Enter the MCU CLI (Calling Line Identification).
14
28 Click Save & Continue.
14
After clicking Save & Continue, you cannot use the Back button to return to previous configuration dialog boxes.
14
29 Click OK to continue the configuration.
14
The Spans dialog box opens displaying the following read-only fields:
14
31 Click Next. The System Flags dialog box is displayed.
15
32 In the Fast Configuration Wizard - System Flags dialog box, enter the following information:
15
33 Click Save & Close. The RMX confirms successful configuration.
16
34 In the Success Message box, click OK.
16
35 In the Reset Confirmation dialog box, click Yes.
16
User Definition
17
To add a new user to the system:
17
1 In the RMX Management pane, click the Users option. The Users pane appears.
17
2 Click the New User button or right-click anywhere in the pane and then click New User.
17
3 In the User Name text box, enter the name of the new user. This is the login name used by the user when logging into the system.
17
4 In the Password text box, enter the new user’s password. This will be the user’s password when logging into the system.
17
5 In the Authorization Level list, select the user type which determines the application display and functionality.
17
6 Click OK.
17
To delete a user from the system:
17
Selecting the RMX Web Client Languages
18
To customize the Multilingual Setting:
18
Conferencing Entities
18
Connecting to a Conference Directly or via Entry Queue
19
H.323 Participants
19
SIP Participants
19
ISDN/PSTN Participants
20
Conference Control Using DTMF Codes
20
View document
Polycom RMX 1500 User guide
Type
User guide
Brand
Polycom
Size
660.24 KB
Category
ISDN access devices
Pages
34
Language
English
View document
Polycom RMX 1500 User manual
Type
User manual
Brand
Polycom
Size
745.67 KB
Category
ISDN access devices
Pages
29
Language
English
Table of contents
Hardware Description
14
Main Features
14
RMX 1500 Specifications
14
RMX 1500 System Capacities
14
Site Requirements
14
Safety Requirements
14
Rack Mount Safety Precautions
14
Installation Precautions
14
Connecting the RMX 1500 to a Power Source
14
Connecting the RMX 1500 to AC Power
14
Connecting Cables on the RMX
14
First-time Power-up
14
RMX 1500 Components
14
RMX 1500 Front Panel
14
Opening the RMX 1500 Front Panel
14
Front Panel Components
14
RMX 1500 Rear Panel
14
RTM IP
14
RTM ISDN
14
ISDN/PSTN Clock Source
14
RMX 1500 Power Supply
14
Power Supply LEDs
14
RMX 1500 LEDs
14
RMX 1500 Front Panel LEDs
14
RMX 1500 Rear Panel LEDs
14
RTM IP 1500 LEDs
14
RTM ISDN 1500 LEDS
14
Power Supply LEDs
14
Component Installation & Replacement
15
Installing the RTM ISDN 1500 Card
15
Component Replacement
15
Replacing the RTM ISDN
15
View document
Polycom RMX 1500 User manual
Type
User manual
Brand
Polycom
Size
504.58 KB
Category
ISDN access devices
Pages
34
Language
English
Table of contents
Table of Contents
3
Hardware Description
5
Main Features
5
RMX 1500 Specifications
6
RMX 1500 System Capacities
7
Conferencing Capacities
7
Resource Capacities
9
Site Requirements
10
Safety Requirements
10
Rack Mount Safety Precautions
10
Installation Precautions
11
Installing the RMX 1500
12
Unpacking the RMX 1500
12
Mounting the RMX 1500 in a Rack
13
Connecting the RMX 1500 to a Power Source
14
Connecting the RMX 1500 to AC Power
15
Connecting Cables to the RMX 1500
16
First-time Power-up
17
RMX 1500 Components
18
RMX 1500 Front Panel
18
Opening the RMX 1500 Front Panel
18
Front Panel Components
19
RMX 1500 Rear Panel
20
RTM IP 1500
20
RTM ISDN 1500
22
ISDN/PSTN Clock Source
23
RMX 1500 Power Supply
24
Power Supply LEDs
24
RMX 1500 LEDs
25
RMX 1500 Front Panel LEDs
25
RMX 1500 Rear Panel LEDs
26
RTM IP 1500 LEDs
26
RTM ISDN 1500 LEDs
28
Power Supply LEDs
28
Component Installation & Replacement
29
Installing a New RTM ISDN 1500 Card
29
Replacing the RTM ISDN 1500
31
Pin Assignment
33
PRI Port Assignment
33
View document
Polycom RMX 1500 User manual
Type
User manual
Brand
Polycom
Size
4.73 MB
Category
Video conferencing systems
Pages
160
Language
English
View document
Polycom RMX 1500 User manual
Type
User manual
Brand
Polycom
Size
207.91 KB
Pages
20
Language
English
View document
Polycom RMX 1500 User manual
Type
User manual
Brand
Polycom
Size
417.92 KB
Pages
2
Language
English
View document
Polycom RMX 1500 User manual
Type
User manual
Brand
Polycom
Size
638.08 KB
Category
ISDN access devices
Pages
34
Language
English
View document
Polycom RMX 1500 User manual
Type
User manual
Brand
Polycom
Size
5.99 MB
Category
Video conferencing systems
Pages
188
Language
English
View document
Polycom RMX 1500 User manual
Type
User manual
Brand
Polycom
Size
492.96 KB
Category
ISDN access devices
Pages
33
Language
English
Table of contents
Table of Contents
3
Hardware Description
5
Main Features
5
RMX 1500 Specifications
6
RMX 1500 System Capacities
7
Conferencing Capacities
7
Resource Capacities
9
Site Requirements
10
Safety Requirements
10
Rack Mount Safety Precautions
10
Installation Precautions
11
Installing the RMX 1500
12
Unpacking the RMX 1500
12
Mounting the RMX 1500 in a Rack
13
Connecting the RMX 1500 to a Power Source
14
Connecting the RMX 1500 to AC Power
15
Connecting Cables to the RMX 1500
16
First-time Power-up
16
RMX 1500 Components
18
RMX 1500 Front Panel
18
Opening the RMX 1500 Front Panel
18
Front Panel Components
19
RMX 1500 Rear Panel
20
RTM IP 1500
20
RTM ISDN 1500
22
ISDN/PSTN Clock Source
23
RMX 1500 Power Supply
23
Power Supply LEDs
23
RMX 1500 LEDs
24
RMX 1500 Front Panel LEDs
24
RMX 1500 Rear Panel LEDs
25
RTM IP 1500 LEDs
25
RTM ISDN 1500 LEDS
27
Power Supply LEDs
27
Component Installation & Replacement
29
Installing the RTM ISDN 1500 Card
30
Component Replacement
32
Replacing the RTM ISDN 1500
33
View document
Polycom RMX 1500 User manual
Type
User manual
Brand
Polycom
Size
4.06 MB
Category
Video conferencing systems
Pages
160
Language
English
View document
Polycom RMX 1500 User manual
Type
User manual
Brand
Polycom
Size
912.46 KB
Category
ISDN access devices
Pages
33
Language
English
View document
Polycom RMX 1500 User manual
Type
User manual
Brand
Polycom
Size
1.04 MB
Category
ISDN access devices
Pages
35
Language
English
Table of contents
Contents
7
Main Features
9
RealPresence Collaboration Server (RMX) 1500 Specifications
10
Network Interfaces
10
RealPresence Collaboration Server (RMX) 1500 System Capacities
11
Conferencing Capacities
11
Resource Capacities
12
Site Requirements
13
Safety Requirements
13
Rack Mount Safety Precautions
13
Installation Precautions
14
Installing the RealPresence Collaboration Server (RMX) 1500
14
Unpacking the RealPresence Collaboration Server (RMX) 1500
14
Installing the RTM ISDN 1500 Card on the RealPresence Collaboration Server (RMX) 1500
15
Telescopic Rail Runner Assembly for RealPresence Collaboration Server (RMX) 1500
16
Assembling the Telescopic Rail Runner
17
Mounting the RealPresence Collaboration Server (RMX) 1500 on a Shelf
20
Connecting the RealPresence Collaboration Server (RMX) 1500 to a Power Source
20
Connecting the RealPresence Collaboration Server (RMX) 1500 to AC Power
21
Connecting Cables to the RealPresence Collaboration Server (RMX) 1500
21
First-time Power-up
22
RealPresence Collaboration Server (RMX) 1500 Components
23
RealPresence Collaboration Server (RMX) 1500 Front Panel
23
Opening the Collaboration Server (RMX) 1500 Front Panel
23
Front Panel Components
24
RealPresence Collaboration Server (RMX) 1500 Rear Panel
25
RTM IP 1500
25
RTM ISDN 1500
27
ISDN/PSTN Clock Source
27
RealPresence Collaboration Server (RMX) 1500 Power Supply
28
RealPresence Collaboration Server (RMX) 1500 LEDs
29
RealPresence Collaboration Server (RMX) 1500 Front Panel LEDs
29
RealPresence Collaboration Server (RMX) 1500 Rear Panel LEDs
29
RTM IP 1500 LEDs
29
RTM ISDN 1500 LEDs
30
Power Supply LEDs
31
Installing or Replacing the RTM ISDN 1500 Card
32
Removing the Blank Cover or the Existing RTM ISDN 1500 Card from the RealPresence Collaboration Server (RMX) 1500
32
Installing a New or Replacement RTM ISDN 1500 Card
33
View document
Polycom RMX 1500 User manual
Type
User manual
Brand
Polycom
Size
396.64 KB
Category
ISDN access devices
Pages
29
Language
English
View document
Polycom RMX 1500 User manual
Type
User manual
Brand
Polycom
Size
27.31 MB
Category
Software licenses/upgrades
Pages
1010
Language
English
View document
Polycom RMX 1500 User manual
Type
User manual
Brand
Polycom
Size
207.82 KB
Category
IP phones
Pages
20
Language
English
Table of contents
RMX® 1500 Installation & Configuration Guide
1
General Safety Precautions
1
Preparations
1
Unpacking the RMX
2
Management Network Configuration on the USB Key
2
The system is shipped with the following default IP addresses:
2
1 Take the USB Key from the Installation Accessories kit and insert it into a PC.
3
2 Double-click LanConfigUtility.exe to start the utility.
3
4 Click OK.
3
5 Remove the USB Key from the PC. The USB key is required for first entry power-up of the RMX.
3
Installing the RMX
3
6 You can install it either in a rack or place it on a flat surface:
3
7 Connect the following cables to the RMX rear panel:
3
First Entry Power-up
4
8 Insert the USB key with the modified IP addresses in the USB port on the front panel.
4
9 Power the RMX ON. The parameters in the lan.cfg file are uploaded from the USB key to the RMX’s memory and applied during the power-up sequence.
4
10 Remove the USB key.
4
Product Registration and Activation Key Retrieval
4
1 Using a Web browser, connect to http://portal.polycom.com.
4
2 Login with your Email Address and Password or register as a new user.
4
3 Select the Product Registration link.
4
4 Follow the on-screen instructions for Product Registration and Product Activation. (The RMX’s serial number is on a sticker on the back of the unit, if needed.)
4
5 Write down the Product Activation Key number or copy it for later use.
4
Connecting to the MCU
5
1 Start the RMX Web Client application on the workstation by entering in the browser’s address line the IP Address of the control unit as defined in the USB key in the format: http://<Control Unit IP Address> and pressing Enter.
5
3 In the Activation Key field, enter or paste the Product Activation Key retrieved earlier and click OK.
5
Configuring the IP Network Service
5
1 In the Fast Configuration Wizard - IP dialog box, define the following parameters:
6
2 Click Next.
6
3 In the Fast Configuration Wizard - Routes dialog box, enter the IP address of the default router.
6
4 Click Next.
6
5 Enter the required DNS information in the dialog box.
6
7 In the Fast Configuration Wizard - Environment dialog box, select the IP Network Type: H.323, SIP or H.323 & SIP.
7
8 Click Next.
7
11 Click Next.
8
13 In the Fast Configuration Wizard - SIP dialog box, enter the following information:
9
15 Enter the required Security information in the dialog box.
9
16 Click the Save & Continue button.
10
17 Define the following parameters:
10
18 Click Next.
11
19 In the PRI Settings dialog box, define the following parameters:
11
20 Click Next.
12
21 In the Span Definition dialog box, define the following parameters:
12
26 Optional. Repeat steps 23 to 25 to define additional dial-in ranges.
13
27 Enter the MCU CLI (Calling Line Identification).
13
28 Click Save & Continue.
13
After clicking Save & Continue, you cannot use the Back button to return to previous configuration dialog boxes.
13
29 Click OK to continue the configuration.
13
The Spans dialog box opens displaying the following read-only fields:
14
31 Click Next. The System Flags dialog box is displayed.
14
32 In the Fast Configuration Wizard - System Flags dialog box, enter the following information:
15
33 Click Save & Close. The RMX confirms successful configuration.
16
34 In the Success Message box, click OK.
16
35 In the Reset Confirmation dialog box, click Yes.
16
User Definition
17
To add a new user to the system:
17
1 In the RMX Management pane, click the Users option. The Users pane appears.
17
2 Click the New User button or right-click anywhere in the pane and then click New User.
17
3 In the User Name text box, enter the name of the new user. This is the login name used by the user when logging into the system.
17
4 In the Password text box, enter the new user’s password. This will be the user’s password when logging into the system.
17
5 In the Authorization Level list, select the user type which determines the application display and functionality.
17
6 Click OK.
17
To delete a user from the system:
17
Selecting the RMX Web Client Languages
18
To customize the Multilingual Setting:
18
Conferencing Entities
18
Connecting to a Conference Directly or via Entry Queue
19
H.323 Participants
19
SIP Participants
19
ISDN/PSTN Participants
20
Conference Control Using DTMF Codes
20
View document
Polycom RMX 1500 User manual
Type
User manual
Brand
Polycom
Size
1.47 MB
Category
ISDN access devices
Pages
34
Language
English
View document
Polycom RMX 1500 User manual
Type
User manual
Brand
Polycom
Size
1.39 MB
Category
ISDN access devices
Pages
34
Language
English
View document
Polycom RMX 1500 User manual
Type
User manual
Brand
Polycom
Size
5.91 MB
Category
Video conferencing systems
Pages
188
Language
English
View document
Polycom RMX 1500 User manual
Type
User manual
Brand
Polycom
Size
3.52 MB
Category
Video conferencing systems
Pages
188
Language
English
View document