4 DT-600
Metronome mode
1. Pressthe[TEMPO]button,"TEMPO"will
ash.Rotatethe[TEMPO/VALUE]dialto
adjustthevalue.
2. Pressthe[BEAT/PATTERN]button,"BEAT"
or"PATTERN"willash.IfyouchooseBEAT,
thenoteiconswillappearontheLCD.
IfyouchoosePATTERN,"KICK","SNARE"and
otherdrumnameswillappearontheLCD.
3. IfyouchooseBEAT(BEATissetforasingle
quarternote),rotatethe[TEMPO/VALUE]
dialtoadjusttheBEATvalue.BEATrange:
1–8,1+1–8+8
!
Notice
Ifyoupress[VOICE],inmetronomemode
"BEAT"willbeselectedautomatically.
Pressthe[VOICE]button,"VOICE"willash.
Rotatethe[TEMPO/VALUE]dialtochooseone
timbrefromthevechoices.
Choose"PATTERN"toplaytherhythm.
Rotatethe[TEMPO/VALUE]dialtoadjustthe
PATTERNvalue.
PATTERNrange:1to50(1to30arefactorypre-
setrhythms,31to50areusersettings).Please
refertotherhythmeditsection.
4. Tapthe[TAP]buttontosetthetempo.The
tempowillbecalculatedaccordingtothe
speedofyourtap.Thetemporangeis30to
250bpm.
5. Press[START/STOP]tostartthemetro-
nome,pressitagaintostop.
6. Toresettherhythm,movetheslidersupand
down.Movingupadjuststhevolumeofthe
rhythm.
7. Storetheparameters
Aftersettingtheparameters,pressthe
[WRITE]button,"MEMORY"willash.
Usethe[TEMPO/VALUE]dialtoselectthe
memorygroup.Pressthe[WRITE]button
again,"MEMORY"willashquickly.Whenit
stops,thecurrentparametersarestored.
!
Notice
The”EDIT”iconindicatesthatparameters
arebeingchanged.