Bushnell Trail Scout Remote Setup Owner's manual

TrailScoutRemoteSetup

1.MovetoggleswitchtoONposition,thenmovetoggleswit ch toSETUP position.The

LCDwilldisplay

2.PressandholdtheUP andDOWNbuttonatthesametimefor2seconds,thenletgo.

TheLCDwilldisplay

3. PointremoteatTrailScout, pressandholddowntheSNAP button untilredlighton

theremotegoesout,thenrelease.Repeatthis3 moretimes. 

4.Wait15seconds,pressandholddown theSEARCHbutton untilredlightonthe

remote goesout,thenr elease.

5.Pressandholddown t heSNAP button untilredlightgoesout ontheremote,then

release.Thiswillcompleteremotesetup.

6.TurnunitOFF,thenbackON.Wait1minuteandtestt heremote.

7. If remotedoesnotwork,pleaser epeatsteps1thru6.

SetDate

01/01/04

LEARN