Sub-Zero 736TFI User manual

Type
User manual

This manual is also suitable for

Integrated refrigeration can be used
anywhere in the home. It merges seam-
lessly into the décor, with no visible
hinges or grilles. Model 736TFI is a 36"
wide tall unit with freezer storage in the
upper cabinet and lower drawers. This
model is ENERGY STAR
®
qualified for
energy efficiency.
3
6" Integrated
All Freezer—Tall
FEATURES
Custom front panels and hardware allow
for infinite design options.
Point-of-use refrigeration that can be
placed anywhere in the home.
Microprocessor maintains precise control,
within of set temperature.
Easy-access, illuminated touch control
panel.
Bright interior lighting in cabinet and
drawers.
Adjustable wire shelves and door shelves.
Smooth-glide, full-extension storage
drawers.
Door alarm has an audible beep if door or
drawer is left open.
Automatic ice maker provides crescent
shaped ice.
90° door stop built into hinge.
Star-K compliant with harness kit.
ACCESSORIES
Stainless steel front panels with tubular or
pro handles—80" or 84" finished height.
Stainless steel tubular and pro handles.
Dual installation kits for installation with
column, tall or drawer model.
Accessories are available through your Sub-Zero
dealer. For local dealer information, visit the find a
showroom section of our website, subzero.com.
INTERIOR FEATURES
Freezer
1 Temperature Zone
3 Adjustable Wire Shelves
1 Stationary Shelf
2 Storage Drawers
2 Removable Drawer Dividers
4 Adjustable Door Shelves
Automatic Defrost
Automatic Ice Maker
MODEL 736TFI
Design Integrated
INSTALLATION NOTES
Stainless steel panels with handles are
available as accessories. These panels are
not installed at the factory.
Complete installation specifications, including
panel sizes, can be found on our website,
subzero.com/specs.
SPECIFICATIONS
Overall Width 36"
Overall Height 80"
Overall Depth 24"
Door Clearance 34
1
/2"
Drawer Clearance 19
1
/2"
Freezer Capacity 21.5 cu ft
Finished Opening 36" W x 80" H x 25" D*
Electrical Requirements 115 V AC, 60 Hz
15 amp dedicated circuit
Plumbing Requirements
1
/4" OD copper line
20–100 psi
Annual Energy Usage $84**
Shipping Weight 480 lbs
*Depth is 24" from the front of the unit to its back.
Your design may necessitate moving the unit back,
or cabinets forward to achieve a flush fit. This will
require a minimum opening depth of 25".
**Based on 10.65 cents per kilowatt hour.
36" Integrated
All Freezer—Tall
©Sub-Zero, Inc. all rights reserved. Features and specifications are subject to change at any time without notice. 2/10
Unit dimensions may vary by ±
1
/8".
INSTALLATION SPECIFICATIONS
Opening Dimensions
Location of Electrical Supply Location of Water Supply
OVERALL DIMENSIONS
Dimensions in parentheses are in
millimeters unless otherwise specified.
36" (914)
1
4"
(356)
8
0"
(2032)
TO TOP OF
OPENNG
24" (610)
1
5
/16"
(33)
7
7
13
/16"
(1976)
34
1
/2"
(876)
2
0
3
/8"
(
518)
10
1
/4"
(260)
13
1
/4"
(337)
9
3
/4"
(248)
4
"
(102)
1
/2"
(13)
3
/8"
(10)
HEIGHT DIMENSIONS ±
1
/2" (13)
2
4"
(610)
DIMENSIONS WILL VARY WITH PANEL THICKNESS
19
1
/2"
(495)
34
1
/2"
(876)
7" (178)
17
1
/2" (445)
4
1
/2"
(
114
)
POSITION OUTLET WITH
GROUNDING PRONG
TO THE RIGHT
FRONT VIEW
FLOOR
2
1
/2" (64)
1
/4" (6)
13
1
/2"
(343)
3" (76)
FRONT VIEW
3
/4"
(19)
FLOOR
2
1
/2" (64)
13
1
/2"
(343)
TOP VIEW
6"
(152)
1
1
/2"
(38)
2
1
/2"
(64)
BACK
WALL
36" (914)
OPENING WIDTH
25" (635)
O
PENING DEPTH
80" (2032)
OPENING
HEIGHT
FRONT VIEWSIDE VIEW
25" (635)
OPENING
DEPTH
TOP VIEW
  • Page 1 1
  • Page 2 2

Sub-Zero 736TFI User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI