Gossen MetraWatt IR/USB 2500 Operating instructions

Type
Operating instructions

This manual is also suitable for

The Gossen MetraWatt IR/USB 2500 is a versatile interface adapter that enables seamless communication between R2500 and R2700 series controllers and a PC via USB. With this adapter, you can effortlessly transfer data between your controllers and the PC, providing you with efficient data management capabilities.

The Gossen MetraWatt IR/USB 2500 is a versatile interface adapter that enables seamless communication between R2500 and R2700 series controllers and a PC via USB. With this adapter, you can effortlessly transfer data between your controllers and the PC, providing you with efficient data management capabilities.

Erstellt in Deutschland • Änderungen vorbehalten • Eine PDF-Version finden Sie im Internet
Edited in Germany • Subject to change without notice • A pdf version is available on the Internet
GMC-I Messtechnik GmbH
Südwestpark 15
90449 Nürnberg •
Germany
Telefon+49 911 8602-111
Telefax +49 911 8602-777
E-Mail
info@gossenmetrawatt.com
www.gossenmetrawatt.com
1 Application
Using this adapter you can connect
controllers of the R2500 and R2700
series, equipped with a serial IR inter-
face, to the USB interface of any per-
sonal computer. The adapter allows
data transfer between controller and
PC.
2 Connection
The adapter is simply plugged to an
unused USB port of your PC. No
external power supply is required as
the adapter is supplied via the USB
interface. Insert the adapter connec-
tors into the cut-outs provided for this
purpose on front side of the controller.
3 Driver installation
The drivers (Microsoft Windows 98SE,
ME, 2000 und XP) for the IR adapter
are available as driver control software
on our website:
www.gossenmetrawatt.com/englisch/
produkte/irusb2500.htm
www.gossenmetrawatt.com/englisch/
produkte/irusb2700.htm
Usually driver installation works auto-
matically. Otherwise select your
source for driver installation. Please
ignore the alert box that the driver is
not digitally signed if it appears. It may
be necessary to have admin rights for
installation purposes. For further Infor-
mation refer to the info-file Install.PDF.
Note:
Upon installation the driver allocates a
virtual COM interface to the con-
nected controller.
When starting the CompactConfig
software, it locates the controller
which is connected to the USB inter-
face and indicates it as an available
virtual COM interface.
4 Technical Data (Z250I/Z270I)
Operating voltage 5 V DC ±10% from USB
port of PC
Current consumption
50 mA max., 25 mA typ.
IR receiver SIR (serial infrared)
IR transmitter SIR λ = 950 nm
Baud rate 19200 Baud
USB interface 4-pin type B, USB 1.1
compatible with USB 2.0
Pin assignment 1:VCC, 2:D-, 3:D+, 4:GND
EMC EN 61326:2001
EN 61000-2/EN61000-4
Protection class IP 20
  • Page 1 1
  • Page 2 2

Gossen MetraWatt IR/USB 2500 Operating instructions

Type
Operating instructions
This manual is also suitable for

The Gossen MetraWatt IR/USB 2500 is a versatile interface adapter that enables seamless communication between R2500 and R2700 series controllers and a PC via USB. With this adapter, you can effortlessly transfer data between your controllers and the PC, providing you with efficient data management capabilities.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI