KitchenAid KGCC505H User manual

Brand: KitchenAid

Model: KGCC505H

Type: User manual



min.



15" 13-3/4" 19" 15" 2-1/8" 2-7/8" 5-5/8"

(38.1 cm) (34.9 cm) (48.3 cm) (38.1 cm) (5.4 cm) (7.3 cm) (14.3 cm)

30" 29" 19" 30" 2-1/8" 2-7/8" 5-5/8"

(76.2 cm) (73.7 cm) (48.3 cm) (76.2 cm) (5.4 cm) (7.3 cm) (14.3 cm)

36" 35-1/4" 19" 36" 2-1/8" 2-7/8" 5-5/8"

(91.4 cm) (89.5 cm) (48.3 cm) (91.4 cm) (5.4 cm) (7.3 cm) (14.3 cm)

42" 42-3/4" 19" 42" 2-1/8" 2-7/8" 11-1/2"

(106.7 cm) (108.6 cm) (48.3 cm) (106.7 cm) (5.4 cm) (7.3 cm) (28.4 cm)

Gas Built-in Cooktop

PRODUCT MODEL NUMBERS OVERALL DIMENSIONS

CABINET OPENING DIMENSIONS

KGCC505H

KGCC566H

KGCR055G

KGCS105G

KGCS127G

KGCS166G

KGCT055G

KGCT305G

KGCT365G

KGCT366G

KGCV566M

Gas supply: Cooktop is equipped for use with

NATURAL gas (except model KGCR055 - L.P. gas

only). Cooktop can be converted to L.P. gas. Gas

supply line of 3/4" rigid pipe to cooktop location. If

local codes permit, a new AGA or CSA design-

certified, 4-5 foot (1.2-1.5 m) long, 1/2" or 3/4"

I.D., flexible metal appliance connector is

recommended for connecting cooktop to gas

supply line. Pressure regulator has 3/8" female

pipe threads. The supply line shall be equipped

with an approved shutoff valve.

Electrical: 120-volt, 60 Hz, AC-only, 15 amp.

electrical supply. Use copper wire only. A time-

delay fuse or circuit breaker and separate circuit is

recommended.

Grommet is required for electrical cable or power

supply cord hole cut in a metal cabinet.

Minimum distance

to combustible

surface above

countertop

Cooktop width

Gounded outlet –

Locate within 24"

(61 cm) of right rear

corner of cutout.

Gas line opening –

Wall: anywhere 5" (12.7 cm) below

underside of countertop.

Cabinet floor: anywhere within 6" (15.2 cm)

of rear wall is recommended.

Do not seal cooktop

to countertop.

24" (61 cm) min. –

deep countertop is

required.



13" (33 cm)

recommended

upper cabinet

depth





See NOTE*

for minimum

clearances.

combustible area

above countertop

Note: 24" (61 cm) min. clearance if bottom of wood or metal

cabinet is protected by not less than 1/4" (0.6 cm) flame

retardant millboard covered with not less than No. 28 MSG sheet

steel, 0.015" (0.04 cm) stainless steel, or 0.024"(0.06 cm)

aluminum or 0.020" (0.05 cm) copper.

30" (76.2 cm) min. clearance between top of cooking platform

and bottom of unprotected wood or metal cabinet.







18" (45.7 cm) min.

clearance upper

cabinet to countertop

within minimum

clearances to cooktop

Illustration dimensions

Important note on base cabinet construction:

After making the countertop cutout, some

installations may require notching down the base

cabinet side walls to clear the burner box. To

avoid this modification, use a base cabinet having

sidewalls wider the cutout.

30" (76.2 cm)

36" (91.4 cm)

15"

(38.1 cm)

30"

(76.2 cm)

21"

(53.3 cm)

2-7/8"

(7.3 cm)

21"

(53.3 cm)

2-7/8"

(7.3 cm)

2-7/8"

(7.3 cm)

36"

(91.4 cm)

21"

(53.3 cm)

2-7/8"

(7.3 cm)

43"

(109.2 cm)

21"

(53.3 cm)

42" (106.7 cm)

15" (38.1 cm)

Because Whirlpool Corporation policy includes a continuous commitment to improve

our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation

Instructions packed with product. Specifications subject to change without notice.

Ref. 4455834 Rev. A

05-12-04

KitchenAid KGCC505H User manual

KitchenAid KGCC505H User manual

KitchenAid KGCC505H User manual

Related papers

Other documents