Grizzly G1690 is an excellent choice for producing sharp, clean, accurate miters on picture frames, molding, trim, and casement work. The G1690 can be mounted to a bench, or be moved from worksite to worksite. It has two positive stops—one at 90° and another at 45°. These stops are preset at the factory and are probably accurate. However, before you trim an actual workpiece, test the angles on scraps first. The fence can be adjusted to angles other than 45° or 90° using a bevel gauge.
Grizzly G1690 is an excellent choice for producing sharp, clean, accurate miters on picture frames, molding, trim, and casement work. The G1690 can be mounted to a bench, or be moved from worksite to worksite. It has two positive stops—one at 90° and another at 45°. These stops are preset at the factory and are probably accurate. However, before you trim an actual workpiece, test the angles on scraps first. The fence can be adjusted to angles other than 45° or 90° using a bevel gauge.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
Grizzly G1690 is an excellent choice for producing sharp, clean, accurate miters on picture frames, molding, trim, and casement work. The G1690 can be mounted to a bench, or be moved from worksite to worksite. It has two positive stops—one at 90° and another at 45°. These stops are preset at the factory and are probably accurate. However, before you trim an actual workpiece, test the angles on scraps first. The fence can be adjusted to angles other than 45° or 90° using a bevel gauge.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Grizzly Industrial G0529 User manual
-
Wen JN8504 User manual
-
World Imports WI7027308 Operating instructions
-
World Imports WI782108 Operating instructions
-
Grizzly Industrial G7214Z User manual
-
909 BM018 User manual
-
GMC BJ110M User manual
-
Global Machinery Company BJ600 User manual
-
Ryobi JM82G Owner's manual
-
