Triarch 29232-30 User manual

07.07

IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,

CONSULT A LICENSED ELECTRICIAN!

ASSEMBLY INSTRUCTIONS FOR 29232-30

1. Before beginning the assembly, carefully unpack and identify all parts referring to the illustration.

2. Turn power to the installation point OFF.

3. Unravel the supply power and ground wires and pass the holes of cap, leaves and tree.

4. Place cap and leaves over the protruding nipple, and secure with tree.

5. Attach both ends of stem to the hooks of fixture body and loop with leaves.

6. Thread the nipple into the coupling at the bottom of fixture body.

7. Place cover over the nipple, and secure with finial.

8. Install proper bulbs (not provided) to the each socket referring to the markings and labels on

fixture for maximum wattage.

9. Place glass over each socket.

10. Restore power to the installation point ON. Retain this sheet for future reference.

This manual is also suitable for