BDI Semblance Systems 5423-TJ User guide

Type
User guide
SEMBLANCE
MODULAR SYSTEM
TWO PERSON ASSEMBLYB DIUSA.COM
To view the Semblance assembly video,
scan this code with a QR reader or visit
http://www.bdiusa.com/semblance/
assembly.shtml
MAIN
ASSEMBLY
INSTRUCTIONS
3
2
This Template helps locate the various
positions of the second Wall Bracket.
Semblance Wall
Bracket Template
Semblance System
Your SEMBLANCE System Furniture is
engineered for easy assembly.
Carefully follow this procedure to prevent
any damage.
Placement and
Maintenance
SEMBLANCE System Furniture is
designed for indoor use on level floors.
Clean glass with glass cleaner, steel parts
and wood veneer with a moist cloth.
You will need:
32"
This is a leveling string to level the
placement of your Wall Brackets.
3
2
Locate the Package Reference Booklet
See page 3 for a representation of your
Package containing critical information for
its assembly.
3
2
x 1
15020
D x 4
E x 4
F x 1
G x 1
H x 1
I x 1
X x 4
x 2
C x 4
A B
Component List
x 2
x 2
x 6
x 6
x 3
15010
15011
15000
15001
15025
J x 2
K x 4
L x 8
J x 2
K x 4
L x 8
x 1
x 1
E x 4
E x 4
3
2
5
4
6
6
11
Hole
Spaces
Cabinet
Bracket
TOP VIEW
27.25 in
69.3 cm
to Bracket Template
15.625 in
39.7 cm
100 in
254 cm
Single Spacing
x2
J
Model Details
x 2
x 2
x 6
x 6
x 3
Wall Bracket
Placement & Details
Shelf & Cabinet
Location
Overall
Dimensions
See page 2 to identify all components.
For missing hardware pieces, please
contact BDI Customer Service at
other concerns, please contact your BDI
Retailer.
Package Reference
Sample
Package Reference
Sample
WALL SYSTEM
PAGE 4
ROOM DIVIDER
PAGE 10
SHELF ASSEMBLY
PAGE 14
CABINET ASSEMBLY
PAGE 17
5
4
WALL SYSTEM
WALL SYSTEM
Assembly Sequence
Overview
Level each Panel as it is being assembled. Use Leveler Wrench (F) to adjust the
height of the Panel, if necessary.
F
5
4
WALL SYSTEM
Plan Ahead.
To plan unit placement, refer to
Package Reference Booklet for
critical dimensions.
!
The assembled unit CANNOT
be moved, so carefully plan the
placement of the unit prior to
building.
1:
See the Bracket Template spacing
dimension on page 3 of the Package
Reference Booklet. Using the provided
spacing dimension, measure from the
edge of where the left End Panel will
be placed and mark the wall to indicate
placement of the bracket template.
Note:
Future placement of left End Panel
3
2
5
4
6
6
11
Hole
Spaces
Cabinet
Bracket
TOP VIEW
27.25 in
69.3 cm
to Bracket Template
15.625 in
39.7 cm
100 in
254 cm
Single Spacing
x2
J
Model Details
x 2
x 2
x 6
x 6
x 3
33
55
44
66
66
1111
SpacesSpaces
TOP VIEWTOP VIEW
27.25 in27.25 in
69.3 cm69.3 cm
to Bracket Tto Bracket T
emplateemplate
to Bracket Tto Bracket Templateto Bracket Tto Bracket T
15.625 in15.625 in
39.7 cm39.7 cm
100 in100 in
254 cm254 cm
Single SpacingSingle Spacing
x2x2
JJ
Model DetailsModel DetailsModel Details
Package Reference
Sample
7
6
WALL SYSTEM
3:
2:
Align the left side of the Bracket
Template with the wall mark. Level the
Template with the string, and insert
Wall Bracket (B) into its designated
groove. Mark the wall at bracket holes
to locate fastener locations.
B
4:
Attach first Bracket to the wall using
the appropriate attachment method
illustrated below.
Wooden Beam: (B) Bracket
(D) Screws
Concrete/Brick: (X) Plastic Concrete Anchors
(B) Bracket
(D) Screws
A
1
/
4
" masonry drill bit and
Power Drill is required for
pilot holes.
C
X
B
B
B
D
D
D
Sheet Rock: (C) Drywall Anchors
(B) Bracket
(D) Screws
H
H
H
B
7
6
WALL SYSTEM
Package Reference
Sample
3
2
5
4
6
6
11
Hole
Spaces
Cabinet
Bracket
TOP VIEW
27.25 in
69.3 cm
to Bracket Template
15.625 in
39.7 cm
100 in
254 cm
Single Spacing
x2
J
Model Details
x 2
x 2
x 6
x 6
x 3
5:
Refer to Package Reference Booklet
for the number of recommended Wall
Brackets.
If 1 Bracket, skip to step 9 on page 8.
If 2 Brackets, proceed to step 6 and
finish the Wall System section of the
instructions.
6:
Use the Bracket spacing groove that is
determined by your Package Reference
Booklet (2 of 2), to locate the second
Bracket.
9
8
WALL SYSTEM
9
8
7:
Slip the Template over the attached
Bracket (B). Level the Template with
the string and mark second Bracket
hole locations on wall.
8:
Refer to Step 4 on page 6 to attach
second Bracket (B)
B
9:
Bring Divider Panel up to Bracket (B)
and slide Metal Insert (A) into Bracket
with the long flange exposed as shown.
Attach Metal Insert (A) to top of Panel
with Screws (E).
A
B
9
8
WALL SYSTEM
9
8
10:
TOP VIEW
90
For next step turn to
SHELF ASSEMBLY
PAGE 14
11
10
ROOM DIVIDER
Assembly Sequence
Overview
F
Level each Panel as it is being assembled. Use Leveler Wrench (F) to adjust the
height of the Panel, if necessary.
F
11
10
ROOM DIVIDER
Plan Ahead.
To plan unit placement, refer to
Package Reference Booklet for
critical dimensions.
!
The assembled unit CANNOT
be moved, so carefully plan the
placement of the unit prior to
building.
1:
Use the right edge of the Bracket Template
to locate the right side of the attached End
Panel.
equal
13
12
3:
Mark Bracket hole location on wall and
mark the left edge of the Template on the
wall.
B
2:
Leveling the Template with the string,
insert Wall Bracket (B) into designated
groove.
4:
Flip Template over and align right side of
Template with wall mark to locate second
Bracket position. Mark second Bracket
hole location lightly on wall and then install
Bracket.
B
13
12
ROOM DIVIDER
5:
Refer to Step 4 on page 6 to attach both
Brackets.
6:
Bring End Panel up to attached Bracket
(B) and slide Metal Insert (A) into Bracket
(B) with the short flange exposed as
shown. Attach Metal Insert (A) to top of
Panel with Screws (E).
7:
Make sure the Panel’s ends are the
same distance from the wall.
dd
TOP VIEW
A
B
E
G
A
B
15
14
3
2
5
4
6
6
11
Hole
Spaces
Cabinet
Bracket
TOP VIEW
27.25 in
69.3 cm
to Bracket Template
15.625 in
39.7 cm
100 in
254 cm
Single Spacing
x2
J
Model Details
x 2
x 2
x 6
x 6
x 3
SHELF ASSEMBLY
1:
Refer to Package Reference Booklet for
the hole positions of the Shelf Screws (E).
2:
Package Reference
Sample
SHELF
PANEL
PANEL
SHELF
E
15
14
SHELF ASSEMBLY
4:
3:
Use the appropriately sized Shelf Frame as
a spacing guide for the next Panel. Lay the
Frame on the floor beside the fixed Panel
and bring the next Panel up to the Shelf
Frame.
Refer to the Package Reference Booklet
for spacing of each set of Panels.
17
16
17
16
SHELF ASSEMBLY
7:
Install Glass Shelves.
6:
Gently tighten all Shelf Frames.
5:
Slide Metal Insert (A) into attached Bracket
(B) with the long flange exposed as shown.
Attach Metal Insert (A) to top of Panel with
Screws (E).
B
A
Micro-etched face up.
17
16
CABINET ASSEMBLY
17
16
3
2
5
4
6
6
11
Hole
Spaces
Cabinet
Bracket
TOP VIEW
27.25 in
69.3 cm
to Bracket Template
15.625 in
39.7 cm
100 in
254 cm
Single Spacing
x2
J
Model Details
x 2
x 2
x 6
x 6
x 3
2:
Screw Cabinet Brackets (J) into
determined inserts.
1:
Refer to Package Reference Booklet for
Cabinet Bracket positions.
CABINET ASSEMBLY
J
L
G
Package Reference
Sample
19
18
3:
Slide Cabinet in between panels, well
above the Bracket, and carefully lower into
place so that Cabinet Bracket fits into the
recess on cabinet’s bottom side.
PANEL
CABINET
PANEL
CABINET
19
18
CABINET ASSEMBLY
4:
After completing the assembly of
Bracketed Panels, repeat Shelf and
Cabinet Assembly for each consecutive
Panel until your Package is complete.
5:
L
K
PB
20
Helpful Tips for Designing your own Semblance Package.
The Cabinet Bracket Screw must be 1
space hole above the Shelf Screw to
align Cabinet bottom with the top of a
Shelf.
There is a 7 insert spacing pattern to
align Shelves with top and bottom of a
Cabinet.
There is a 3 insert spacing pattern, from
Cabinet Bracket to Shelf Frame, to
align Shelves with middle of a Cabinet.
ADJUST DOOR HINGES (IF NEEDED)
If the cabinet’s door appears out of alignment, this can be corrected with
minor adjustment on each door.
Because these hinges are infinitely adjustable, adjusting one hinge element
can sometimes cause the need for adjustments to other elements. But with
a few adjustments, you can modify the orientation of the cabinet door to
make sure that it hangs evenly.
Use a Phillips screwdriver to adjust cabinet’s door hinges:
• By adjusting Screw 1, the door will move LEFT or RIGHT within the
frame. Make minor adjustments at both top and bottom hinges for
best results.
• By adjusting Screw(s) 2, the door will move UP or DOWN within
the frame (the top and bottom hinges must be adjusted the same
degree).
NOTE: Loosen Screws 2 one complete turn, raise or lower door, then hold
in position while tightening Screws 2 (on both hinges).
• By adjusting Screw 3 the entire door will move IN or OUT, opening
or closing the gap between the doorframe and cabinet. (This screw
rarely needs adjustment.)
REVERSE DOOR-SWING (IF DESIRED)
The Single Cabinets feature a reversible door assembly so that you can
open either from the left or the right.
To reverse the door’s orientation,
1. Remove the Door by actuating both of its quick-release hinges (A);
carefully place the detached Door aside.
2. Using a Philips head screwdriver, remove both Hinge Plates from
the interior wall of the cabinet by loosening the screws holding it in
place (B).
3. Install both Hinge Plates to the opposite interior wall at the
pre-determined locations.
4. Re-install the Door by connecting each Door Hinge to the relocated
Hinge Plates.
Designed by Matthew Weatherly. These distinctive product configurations are protected by US and international patents, trade dress, and/or copyright laws.
BDI are trademarks of Becker Designed, Inc. All Rights reserved. ©2013, BDI Assembled in the US from parts of foreign origin. REV061413v2
7 inserts
CABINET
3 inserts
1.
2.
3.
3.
1.
*2.
*2.
A
B
B
CABINET CABINET
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

BDI Semblance Systems 5423-TJ User guide

Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI