BDI 8237-B User guide

SEMBLANCE

MODULAR SYSTEM

TWO PERSON ASSEMBLYB DIUSA.COM

To view the Semblance assembly video,

scan this code with a QR reader or visit

http://www.bdiusa.com/semblance/

assembly.shtml

MAIN

ASSEMBLY

INSTRUCTIONS

3

2

This Template helps locate the various

positions of the second Wall Bracket.

Semblance Wall

Bracket Template

Semblance System

Your SEMBLANCE System Furniture is

engineered for easy assembly.

Carefully follow this procedure to prevent

any damage.

Placement and

Maintenance

SEMBLANCE System Furniture is

designed for indoor use on level floors.

Clean glass with glass cleaner, steel parts

and wood veneer with a moist cloth.

You will need:

32"

This is a leveling string to level the

placement of your Wall Brackets.

3

2

Locate the Package Reference Booklet

See page 3 for a representation of your

Package containing critical information for

its assembly.

3

2

x 1

15020

D x 4

E x 4

F x 1

G x 1

H x 1

I x 1

X x 4

x 2

C x 4

A B

Component List

x 2

x 6

x 3

15010

15011

15000

15001

15025

J x 2

K x 4

L x 8

J x 2

K x 4

L x 8

x 1

E x 4

3

2

5

4

6

11

Hole

Spaces

Cabinet

Bracket

TOP VIEW

27.25 in

69.3 cm

to Bracket Template

15.625 in

39.7 cm

100 in

254 cm

Single Spacing

x2

J

Model Details

x 2

x 6

x 3

Wall Bracket

Placement & Details

Shelf & Cabinet

Location

Overall

Dimensions

See page 2 to identify all components.

For missing hardware pieces, please

contact BDI Customer Service at

[email protected]. For all

other concerns, please contact your BDI

Retailer.

Package Reference

Sample

Package Reference

Sample

WALL SYSTEM

PAGE 4

ROOM DIVIDER

PAGE 10

SHELF ASSEMBLY

PAGE 14

CABINET ASSEMBLY

PAGE 17

5

4

WALL SYSTEM

Assembly Sequence

Overview

Level each Panel as it is being assembled. Use Leveler Wrench (F) to adjust the

height of the Panel, if necessary.

F

5

4

WALL SYSTEM

Plan Ahead.

To plan unit placement, refer to

Package Reference Booklet for

critical dimensions.

!

The assembled unit CANNOT

be moved, so carefully plan the

placement of the unit prior to

building.

1:

See the Bracket Template spacing

dimension on page 3 of the Package

Reference Booklet. Using the provided

spacing dimension, measure from the

edge of where the left End Panel will

be placed and mark the wall to indicate

placement of the bracket template.

Note:

Future placement of left End Panel

3

2

5

4

6

11

Hole

Spaces

Cabinet

Bracket

TOP VIEW

27.25 in

69.3 cm

to Bracket Template

15.625 in

39.7 cm

100 in

254 cm

Single Spacing

x2

J

Model Details

x 2

x 6

x 3

33

55

44

66

1111

HoleHole

SpacesSpaces

TOP VIEWTOP VIEW

27.25 in27.25 in

69.3 cm69.3 cm

to Bracket Tto Bracket T

emplateemplate

to Bracket Tto Bracket Templateto Bracket Tto Bracket T

15.625 in15.625 in

39.7 cm39.7 cm

100 in100 in

254 cm254 cm

Single SpacingSingle Spacing

x2x2

JJ

Model DetailsModel DetailsModel Details

Package Reference

Sample

7

6

WALL SYSTEM

3:

2:

Align the left side of the Bracket

Template with the wall mark. Level the

Template with the string, and insert

Wall Bracket (B) into its designated

groove. Mark the wall at bracket holes

to locate fastener locations.

B

4:

Attach ﬁrst Bracket to the wall using

the appropriate attachment method

illustrated below.

Wooden Beam: (B) Bracket

(D) Screws

Concrete/Brick: (X) Plastic Concrete Anchors

(B) Bracket

(D) Screws

A

1

/

4

" masonry drill bit and

Power Drill is required for

pilot holes.

C

X

B

D

Sheet Rock: (C) Drywall Anchors

(B) Bracket

(D) Screws

H

B

7

6

WALL SYSTEM

Package Reference

Sample

3

2

5

4

6

11

Hole

Spaces

Cabinet

Bracket

TOP VIEW

27.25 in

69.3 cm

to Bracket Template

15.625 in

39.7 cm

100 in

254 cm

Single Spacing

x2

J

Model Details

x 2

x 6

x 3

5:

Refer to Package Reference Booklet

for the number of recommended Wall

Brackets.

If 1 Bracket, skip to step 9 on page 8.

If 2 Brackets, proceed to step 6 and

ﬁnish the Wall System section of the

instructions.

6:

Use the Bracket spacing groove that is

determined by your Package Reference

Booklet (2 of 2), to locate the second

Bracket.

9

8

WALL SYSTEM

9

8

7:

Slip the Template over the attached

Bracket (B). Level the Template with

the string and mark second Bracket

hole locations on wall.

8:

Refer to Step 4 on page 6 to attach

second Bracket (B)

B

9:

Bring Divider Panel up to Bracket (B)

and slide Metal Insert (A) into Bracket

with the long ﬂange exposed as shown.

Attach Metal Insert (A) to top of Panel

with Screws (E).

A

B

9

8

WALL SYSTEM

9

8

10:

TOP VIEW

90

For next step turn to

SHELF ASSEMBLY

PAGE 14

11

10

ROOM DIVIDER

Assembly Sequence

Overview

F

Level each Panel as it is being assembled. Use Leveler Wrench (F) to adjust the

height of the Panel, if necessary.

F

11

10

ROOM DIVIDER

Plan Ahead.

To plan unit placement, refer to

Package Reference Booklet for

critical dimensions.

!

The assembled unit CANNOT

be moved, so carefully plan the

placement of the unit prior to

building.

1:

Use the right edge of the Bracket Template

to locate the right side of the attached End

Panel.

equal

13

12

3:

Mark Bracket hole location on wall and

mark the left edge of the Template on the

wall.

B

2:

Leveling the Template with the string,

insert Wall Bracket (B) into designated

groove.

4:

Flip Template over and align right side of

Template with wall mark to locate second

Bracket position. Mark second Bracket

hole location lightly on wall and then install

Bracket.

B

13

12

ROOM DIVIDER

5:

Refer to Step 4 on page 6 to attach both

Brackets.

6:

Bring End Panel up to attached Bracket

(B) and slide Metal Insert (A) into Bracket

(B) with the short ﬂange exposed as

shown. Attach Metal Insert (A) to top of

Panel with Screws (E).

7:

Make sure the Panel’s ends are the

same distance from the wall.

dd

TOP VIEW

A

B

E

G

A

B

15

14

3

2

5

4

6

11

Hole

Spaces

Cabinet

Bracket

TOP VIEW

27.25 in

69.3 cm

to Bracket Template

15.625 in

39.7 cm

100 in

254 cm

Single Spacing

x2

J

Model Details

x 2

x 6

x 3

SHELF ASSEMBLY

1:

Refer to Package Reference Booklet for

the hole positions of the Shelf Screws (E).

2:

Package Reference

Sample

SHELF

PANEL

SHELF

E

15

14

SHELF ASSEMBLY

4:

3:

Use the appropriately sized Shelf Frame as

a spacing guide for the next Panel. Lay the

Frame on the ﬂoor beside the ﬁxed Panel

and bring the next Panel up to the Shelf

Frame.

Refer to the Package Reference Booklet

for spacing of each set of Panels.

17

16

17

16

SHELF ASSEMBLY

7:

Install Glass Shelves.

6:

Gently tighten all Shelf Frames.

5:

Slide Metal Insert (A) into attached Bracket

(B) with the long ﬂange exposed as shown.

Attach Metal Insert (A) to top of Panel with

Screws (E).

B

A

Micro-etched face up.

17

16

CABINET ASSEMBLY

17

16

3

2

5

4

6

11

Hole

Spaces

Cabinet

Bracket

TOP VIEW

27.25 in

69.3 cm

to Bracket Template

15.625 in

39.7 cm

100 in

254 cm

Single Spacing

x2

J

Model Details

x 2

x 6

x 3

2:

Screw Cabinet Brackets (J) into

determined inserts.

1:

Refer to Package Reference Booklet for

Cabinet Bracket positions.

CABINET ASSEMBLY

J

L

G

Package Reference

Sample

19

18

3:

Slide Cabinet in between panels, well

above the Bracket, and carefully lower into

place so that Cabinet Bracket ﬁts into the

recess on cabinet’s bottom side.

PANEL

CABINET

PANEL

CABINET

19

18

CABINET ASSEMBLY

4:

After completing the assembly of

Bracketed Panels, repeat Shelf and

Cabinet Assembly for each consecutive

Panel until your Package is complete.

5:

L

K

PB

20

Helpful Tips for Designing your own Semblance Package.

The Cabinet Bracket Screw must be 1

space hole above the Shelf Screw to

align Cabinet bottom with the top of a

Shelf.

There is a 7 insert spacing pattern to

align Shelves with top and bottom of a

Cabinet.

There is a 3 insert spacing pattern, from

Cabinet Bracket to Shelf Frame, to

align Shelves with middle of a Cabinet.

ADJUST DOOR HINGES (IF NEEDED)

If the cabinet’s door appears out of alignment, this can be corrected with

minor adjustment on each door.

Because these hinges are inﬁnitely adjustable, adjusting one hinge element

can sometimes cause the need for adjustments to other elements. But with

a few adjustments, you can modify the orientation of the cabinet door to

make sure that it hangs evenly.

Use a Phillips screwdriver to adjust cabinet’s door hinges:

• By adjusting Screw 1, the door will move LEFT or RIGHT within the

frame. Make minor adjustments at both top and bottom hinges for

best results.

• By adjusting Screw(s) 2, the door will move UP or DOWN within

the frame (the top and bottom hinges must be adjusted the same

degree).

NOTE: Loosen Screws 2 one complete turn, raise or lower door, then hold

in position while tightening Screws 2 (on both hinges).

• By adjusting Screw 3 the entire door will move IN or OUT, opening

or closing the gap between the doorframe and cabinet. (This screw

rarely needs adjustment.)

REVERSE DOOR-SWING (IF DESIRED)

The Single Cabinets feature a reversible door assembly so that you can

open either from the left or the right.

To reverse the door’s orientation,

1. Remove the Door by actuating both of its quick-release hinges (A);

carefully place the detached Door aside.

2. Using a Philips head screwdriver, remove both Hinge Plates from

the interior wall of the cabinet by loosening the screws holding it in

place (B).

3. Install both Hinge Plates to the opposite interior wall at the

pre-determined locations.

4. Re-install the Door by connecting each Door Hinge to the relocated

Hinge Plates.

Designed by Matthew Weatherly. These distinctive product conﬁgurations are protected by US and international patents, trade dress, and/or copyright laws.

7 inserts

CABINET

3 inserts

1.

2.

3.

1.

*2.

A

B

CABINET CABINET

BDI 8237-B User guide

BDI 8237-B User guide

Related papers

Other documents