ESAB De-I Cool™ De-ionized Water Mixture Troubleshooting instruction

Brand: ESAB

Model: De-I Cool™ De-ionized Water Mixture

Type: Troubleshooting instruction

This coolant mixture is specifically designed to provide both a cooling medium and electrical protection. It provides a

resistance value of .4 megohm/cm or greater to prevent it from carrying an electrical current. Any water cooled torch that

incorporates a DC current pilot arc could potentially suffer severe internal damage due to electrolysis if the coolant ever

becomes electrically conductive.

0-4655 (6/04)

D A T E : June 1, 2004

S U B J E C T : De-I Cool™ De-ionized Water Mixture

This new coolant is colored “YELLOW” to simplify identification. This makes it:

• easy to identify Genuine coolant on the shelf.

• easy to identify Genuine coolant level in the coolant reservoir.

• easy to determine the coolant level left in a container.

Dear Customer,

Effective July 1, 2004, Thermal Dynamics will offer a new coolant, De-I Cool™ , a de-ionized water coolant specifically

designed for applications where temperatures always exceed +40°F (+4°C). This water mixture can be used with plasma

welding torches, plasma cutting torches, MIG torches, TIG torches and Cooling Recirculators.

Yellow

+40°F (+4.4°C) (minimum

temperature)

.4 megohm/cm (minimum

Resistivity)

This is a special formulated de-ionized water mixture that

can be used in applications where freezing protection is not

required during use. Contains special corrosion inhibitors

to protect copper surfaces in the coolant loop.

7-3583De-I Cool™

Coolant

Color

Specifications DescriptionCat

No.

New

Product

De-I Cool™

• Maximum torch cooling performance where application use is above +40°F (+4.4°C).

• Exceeds the required resistance levels… greater than .4 megohm/cm to prevent electrolysis

in the torch. High conductivity in the coolant often results in difficulties starting the pilot arc or

leads to torch head failures.

• Special corrosion inhibitors have been added to protect the copper and cooling system which

will enhance the time the coolant will remain highly resistive.

All De-I Cool Coolant mixtures are shipped in 2- container packs. Coolant is priced by the gallon -

minimum 2 gal purchase.

Note:

The De-I Cool™ mixture may freeze during shipment depending time of year or shipping

location. This will not impact the performance of the coolant. The coolant must be allowed to reach

+40°F (+4.4°C) before being put into use.

ESAB De-I Cool™ De-ionized Water Mixture Troubleshooting instruction

ESAB De-I Cool™ De-ionized Water Mixture Troubleshooting instruction

ESAB De-I Cool™ De-ionized Water Mixture Troubleshooting instruction

Related papers

Other documents