Miller KF919561 is a CV/DC Welding Power Source/Wire Feeder that can be used for Gas Metal Arc Welding (GMAW) and Flux Cored Arc Welding (FCAW). It has a rated weld output of 150 Amperes, 22 Volts DC at 40% duty cycle and uses 230 Volts AC, Single-Phase input power. The welding power source can feed .023 Thru .035 in (0.58 Thru 0.89 mm) wire and has overheating and overload protection. It comes with a gun and gas valve and has a 5-year warranty on original main power rectifiers and 3-year warranty on transformer/rectifier power sources.
Miller KF919561 is a CV/DC Welding Power Source/Wire Feeder that can be used for Gas Metal Arc Welding (GMAW) and Flux Cored Arc Welding (FCAW). It has a rated weld output of 150 Amperes, 22 Volts DC at 40% duty cycle and uses 230 Volts AC, Single-Phase input power. The welding power source can feed .023 Thru .035 in (0.58 Thru 0.89 mm) wire and has overheating and overload protection. It comes with a gun and gas valve and has a 5-year warranty on original main power rectifiers and 3-year warranty on transformer/rectifier power sources.
Miller KF919561 is a CV/DC Welding Power Source/Wire Feeder that can be used for Gas Metal Arc Welding (GMAW) and Flux Cored Arc Welding (FCAW). It has a rated weld output of 150 Amperes, 22 Volts DC at 40% duty cycle and uses 230 Volts AC, Single-Phase input power. The welding power source can feed .023 Thru .035 in (0.58 Thru 0.89 mm) wire and has overheating and overload protection. It comes with a gun and gas valve and has a 5-year warranty on original main power rectifiers and 3-year warranty on transformer/rectifier power sources.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI