MODE
FLAT
VOL+
EQ
VOL -
PAIR
AUX IN
L R
DC IN 18 V
-
+
Pair
DID YOU KNOW?
You can apply sound field eects using the EQ
function.
GETTING STARTED:
Follow the instructions below to connect and power
on the soundbar.
a
b
Press the EQ button on the remote control
repeatedly to move between the EQ modes
of: Rock, Pop, Jazz, Live, Classic & Vocal. The
orange LED will illuminate to indicate the EQ
mode is active.
To revert back to the default sound mode,
press the FLAT button on the remote
control. The orange LED will go o to
indicate the EQ mode is inactive.
a
b
c
This Soundbar is supplied with a mains power adapter.
To connect the power, insert the mains adapter plug
into the rear of the unit.
Insert the plug into a power socket and switch the
power on.
Press and hold the STANDBY button on the side of the
soundbar until the red standby LED goes o.
a
b
c