King Canada CT-380C User manual

Brand: King Canada

Model: CT-380C

Type: User manual

King Canada CT-380C is a 15” planer that comes with four lifting handles for easy transport. It can be assembled to a bench using screws and nuts. It has a magnetic switch and a depth of cut adjustment, which can be set to a maximum of 1/8”. The planer also has anti-kickback fingers to prevent accidents. The feed roll speed can be controlled using a lever. The belt tension can be adjusted by loosening two bolts and prying up on the motor plate. The planer comes with a knife gauge to help check and adjust the knives. It operates on a 115V, 60Hz, single phase power supply, and draws 15 amps.

King Canada CT-380C is a 15” planer that comes with four lifting handles for easy transport. It can be assembled to a bench using screws and nuts. It has a magnetic switch and a depth of cut adjustment, which can be set to a maximum of 1/8”. The planer also has anti-kickback fingers to prevent accidents. The feed roll speed can be controlled using a lever. The belt tension can be adjusted by loosening two bolts and prying up on the motor plate. The planer comes with a knife gauge to help check and adjust the knives. It operates on a 115V, 60Hz, single phase power supply, and draws 15 amps.

PARTS DIAGRAM & PARTS LISTS

Refer to the Parts section of the King Canada web site for the most updated parts diagram and parts list.

1
2
3
4
5
6
7
8
9
10
11
12
13

King Canada CT-380C User manual

Brand: King Canada

Model: CT-380C

Type: User manual

King Canada CT-380C is a 15” planer that comes with four lifting handles for easy transport. It can be assembled to a bench using screws and nuts. It has a magnetic switch and a depth of cut adjustment, which can be set to a maximum of 1/8”. The planer also has anti-kickback fingers to prevent accidents. The feed roll speed can be controlled using a lever. The belt tension can be adjusted by loosening two bolts and prying up on the motor plate. The planer comes with a knife gauge to help check and adjust the knives. It operates on a 115V, 60Hz, single phase power supply, and draws 15 amps.

Download PDF

Related papers

Other documents