PROAIM RS-1 User manual

(RS-1)Rail system

(RS-1)

INSTRUCTION MANUAL

No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any

means, electronic, mechanical, photocopying, recording, or otherwise, except as may be expressly permied by

the applicable copyright statutes or in wring by the Publisher.

Proaim (RS-1) Rail system 2

INTRODUCTION

A small, light setup soluon expandable to a more elaborate setup enables you to mount mul-

ple photo/video accessories for use with your camera system. Its design prevents the camera

from "twisng" on the rail support and raises the camera to the standard height. Proaim Rail Sys-

tem is specically designed to work for Follow Focus and long lenses. This Rail System comes

with standard 15mm rods which are compable with Arri and other accessories such as Follow

Focus, Mae Box, etc.

IN THE BOX

Please inspect the contents of your shipped package to ensure you have received all that is

pictured and listed below.

ASSEMBLING YOUR RAIL SYSTEM

 Aach the tripod plate with the 1/ 4”-20 mounng threads onto the tripod then insert 300mm

female rods and ghten the knob.

Tripod plate

Quick release plate 2x 300 mm female rods

 Insert your quick release plate and ghten the knob, push the side pin and remove the top plate

of quick release plate.

knob

Proaim (RS-1) Rail system 3

 Aach your top plate with your camera and ghten the screw properly. Then mount your

camera onto the quick release plate and ghten the knob.

knob

PROAIM (RS-1) RAIL SYSTEM

ALL DRESSED UP AND GOOD TO GO

(SHOWN WITH OPTIONAL ACCESSORIES)

WARRANTY

We oer a one year warranty for our products from the date of purchase.

We will repair or replace your product, free of charge, in the event of a defect in materials or

crasmanship obtained during normal use or handling based on the user manual. Please note

that we will not cover any shipping costs for returning the product to us. If any VAT or import

dues are applied to the return, we will also charge these costs to the customer.

The warranty does not include, by the way of example, damage caused by products that we do

not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product ,

or service by anyone other than our company.

Proaim (RS-1) Rail system 4

We are not liable for incidental or consequenal damages resulng from the use of the unit or

occurring due to any breach of this warranty.

Replacement parts of the product will be provided at nominal cost (covering the cost price of the

replacement parts only) to the customers aer the Warranty Period has expired. We will cover

the complete cost of sending replacement parts within the warranty period. Aer that, nominal

cost of the product & Actual shipping cost will be charged.

Do not send the unit to us without rst geng a response and geng the approval to send back

the item.

In case of any kind of dissasfacon, we urge you to Contact us immediately and we shall do our

best to help you out.

For any other assistance you can reach us via email.

PROAIM RS-1 User manual

PROAIM RS-1 User manual

Related papers

Other documents