Lippert Components TI-325 Installation guide

Brand: Lippert Components

Model: TI-325

Type: Installation guide

Rev: 06.28.19 Page 1 CCD-0002702

JACKKNIFE SOFA SUPPORT LEG INSTALLATION GUIDE

TI-325

FURNITURE

Purpose

This document describes the procedure for attaching legs to the jackknife sofa. The aftermarket leg kit is PN

364582 and contains two 11

" x 2" legs, four

⁄

" - 18 x

" bolts and four nylon locknuts.

Resources Required

• Socket wrench

•

" socket

•

" open-end wrench

Installation

1. Stand sofa on its side to provide access to one leg bracket.

2. Install bolts facing outward in the holes on the end of each side of the leg bracket (Figs 1 and 2).

3. Insert leg section onto the bolts (Fig. 3).

Fig. 1

Hole at End

of Bracket

Hole at End

of Bracket

Fig. 2

Bolt Facing

Outward

Fig. 3

Rev: 06.28.19 Page 2 CCD-0002702

As a supplier of components to the RV industry, safety, education and customer satisfaction are our primary concerns. Should you

have any questions, please do not hesitate to contact us at (574) 537-8900 or by email at [email protected]. Self-help tips,

technical documents, product videos and a training class schedule are available at lci1.com or by downloading the MyLCI app.

JACKKNIFE SOFA SUPPORT LEG INSTALLATION GUIDE

TI-325

FURNITURE

4. Place nut on end of bolts.

5. Apply open-end wrench to the bolt head to prevent movement while tightening the nut (Fig. 4).

6. Using a ½" socket and socket wrench, firmly tighten the nut (Fig. 5).

7. Repeat procedure to fasten the other bolt.

8. Turn sofa over to provide access to the other leg bracket (Fig. 6).

9. Repeat steps 2 through 7 for the second leg.

10. The legs are now attached to the jackknife sofa (Fig. 7).

Fig. 4

Fig. 5

Fig. 6 Fig. 7

Lippert Components TI-325 Installation guide

Lippert Components TI-325 Installation guide

Lippert Components TI-325 Installation guide

Related papers

Other documents