Daewoo D@eBox User manual

Category
PC/workstation barebones
Type
User manual

Daewoo D@eBox is a personal computer that offers a range of features and capabilities to enhance your productivity and entertainment experience.

With its compact and stylish design, the Daewoo D@eBox fits seamlessly into any modern workspace or home environment. The 15-inch monitor provides a clear and vibrant display, perfect for viewing documents, spreadsheets, presentations, and multimedia content.

Under the hood, the Daewoo D@eBox is powered by a reliable processor and ample memory, ensuring smooth and responsive performance for everyday tasks such as web browsing, email management, and office applications. It also comes equipped with a generous storage capacity, providing ample space for your files, documents, music, and videos.

Daewoo D@eBox is a personal computer that offers a range of features and capabilities to enhance your productivity and entertainment experience.

With its compact and stylish design, the Daewoo D@eBox fits seamlessly into any modern workspace or home environment. The 15-inch monitor provides a clear and vibrant display, perfect for viewing documents, spreadsheets, presentations, and multimedia content.

Under the hood, the Daewoo D@eBox is powered by a reliable processor and ample memory, ensuring smooth and responsive performance for everyday tasks such as web browsing, email management, and office applications. It also comes equipped with a generous storage capacity, providing ample space for your files, documents, music, and videos.

Users Manual
DAEWOO TELECOM LTD.
AIO(DAE) 0.3.30 3:39 PM ‰¿Ã¡ˆ1
S t a rt i n g
1. How to use this manual
2. Check Items
3. System Setting
Ch1.System Configuration
1. Front configuration
2. Rear configuration
Ch2. Start to Install
1. Plugging the mouse/keyboard
2. Plugging the Power Cord
3. Plugging the RJ11 Phone line
Ch3. System Disassembling & assembling
1. Disassemble Drawing
2. Upgrading Memory and Replacing Backup Battery
3. Assemble Drawing
Ch4.Monitor
1. Factory Preset Display Mode
2. Technical Specification
3. OSD Program Description
Ch5.Mother Board
1. Specification
2. Layout
3. Set Jumper
Ch6.Bios setup
3
3
4
5
6
6
7
8
8
9
1 0
1 1
1 2
1 7
2 0
2 3
2 3
2 3
2 4
2 8
2 8
3 0
3 1
3 2
C O N T E N T S
AIO(DAE) 0.3.30 3:39 PM ‰¿Ã¡ˆ2
S t a rt i n g
How to use this manual
It is very easy to install the computer system with this manual.
Please read this guide carefully, before you install the computer system.
For your safety, remember to turn off the system and t
o
disconnect all the cords and cables before opening the system
chassis.
To avoid electric shock, do not open the monitor frame chassis.
[figure. 1]
Daewoo Telecom Lt
AIO(DAE) 0.3.30 3:39 PM ‰¿Ã¡ˆ3
2.Check Items
Check your boxes for the following items.
U s e r’s Manual CD-ROM Ti t l e
Power cord M o u s e
K e y b o a r dS y s t e m
AIO(DAE) 0.3.30 3:39 PM ‰¿Ã¡ˆ4
3.System Setting
Operate the PC on a sturdy level surface such as desk or table.
Daewoo Telecom Lt
Please do not overload the power
s o c k e t .
Do not place magnetic objects close
to the system.
Avoid dust or moisture from the
s y s t e m . Place the system away from radio or
any electronic receivers.
Keep distance between the system
and the wall.
Place the system away from high
temperature and direct sunlight.
AIO(DAE) 0.3.30 3:39 PM ‰¿Ã¡ˆ5
Ch.1 System Configuration
1.F r ont configuration
[ f i g u r e . 2 ]
M i c r o - p h o n e
M o n i t o r
HDD LED
Power Butt
o
FDD LED
CD-ROM Drive
CD-ROM Drive
L E D
CD-ROM Drive
eject button
Floppy Disk Drive
FDD eject button
AIO(DAE) 0.3.30 3:39 PM ‰¿Ã¡ˆ6
2.Rear Configuration
[ f i g u r e . 3 ]
Daewoo Telecom Lt
AC Power
S p e a k e r
M o u s e
K e y b o a r d
Line in
Speaker out
USB port
L A N
Tel Line(to th
e
P h o n e
Serial port
Parallel port
MIDI/Game port
AIO(DAE) 0.3.30 3:39 PM ‰¿Ã¡ˆ7
Ch.2 Start to Install
1.Plugging keyboard and mouse
[figure. 4]
Keyboard and mouse connector is on the rear panel.
Connect the keyboard to the keyboard connector colored blue.
Connect the mouse to the mouse connector colored green.
AIO(DAE) 0.3.30 3:39 PM ‰¿Ã¡ˆ8
2.Plugging the power cord
[figure. 5]
D@eBox Computer System applies both 110/220V power range witho
u
any setting action.
Just plug the power cord into your PC and connect the cord to th
grounded outlet.
Do not connect power cable to the power outlet until you finish
all the preceding steps.
Daewoo Telecom Lt
AIO(DAE) 0.3.30 3:39 PM ‰¿Ã¡ˆ9
3.Plugging the RJ11 Phone line
[figure. 6]
With telephone line connectivity, you can network PCs located anywhe
r
in the same building where you have access to jacks from a singl
telephone line.
Connect phone jack and telephone line of the PCs you want to networ
with RJ11 telephone line.
P h o n e
Tel Line(to the w
a
AIO(DAE) 0.3.30 3:39 PM ‰¿Ã¡ˆ10
CH3. System disassemble & assemble
This model provides many convenient options that gives you more syst
e
f l e x i b i l i t y. This chapter describes how to install optional part inside th
computer and remove and replace the computer cover and expansion-ca
cage.
A r e you re a d y ?
For easier work with inside your computer , please check out you hav
proper lighting and a clean work space. If you temporarily disconne
cables or remove expansion cards, make sure you note the position of th
connectors and slots so that you can reassemble the system correctly.
Rules for safety
1. Remove all the AC power source from your computer and a
peripherals.
2. Connection any telephone or telecommunication lines from th
computer may cause personal injury or electric shock.
3. Please wait 5 seconds after turning off the computer befo
disconnecting the peripheral or removing the component when you a
disconnecting a peripheral from the computer or removing a compone
from the system board, to avoid possible damage to the system board.
4. Touch an unpainted metal surface on the computer chassis, such as th
power supply, before touching anything inside your computer.
To avoid static electricity that might harm internal components, plea
touch an unpainted metal surface on the computer chassis periodicall
Touching components or contacts on a card or pins on a chip might cau
damage of components.
Daewoo Telecom L
AIO(DAE) 0.3.30 3:39 PM ‰¿Ã¡ˆ11
1. Disassembling Drawing
This section describes how to disassemble PC for adding RAMs, changi
n
b a t t e r y, installing modem card etc.
It is very important to check if the AC power cable is removed from PC
before you disassemble your PC. If the AC power cable is removed form
your PC, you may start disassembling.
Opening the Computer
1) Place a soft stuff (example : towel, cloth etc.) on the front of computer.
[figure. 7]
Place a soft stuff on the
front of computer
AIO(DAE) 0.3.30 3:39 PM ‰¿Ã¡ˆ12
2) As you could see [figure.8], there are 5 screws and loose 4 of the
m
which is indicated as to separate the thin plate.
[figure. 8]
Daewoo Telecom Lt
Loose these sc
AIO(DAE) 0.3.30 3:39 PM ‰¿Ã¡ˆ13
3) After you separate the thin plate as you can see in [figure. 9], loose
screws indicated as to separate transparent case , first remove t
h
speaker cable () which is connected to speaker at this moment.
[figure. 9]
transparent cose
remove the speaker
c a b l e
loose these
AIO(DAE) 0.3.30 3:39 PM ‰¿Ã¡ˆ14
4) After you separate transparent case, loose 3 screws indicated as
t o
separate the body of PC. [figure. 10,11] shows how you can separat
body and monitor. Please be cautious when you pull out the bod
because the body and monitor is connected with cable. If you pull ou
the body little bit first then remove the cable, there will be no problem
[figure. 12] shows after the monitor and body is separated.
Daewoo Telecom Lt
Loose these
s c r e w s
[figure. 10] [figure.
11
[figure. 12]
AIO(DAE) 0.3.30 3:39 PM ‰¿Ã¡ˆ15
5) Description for each part of main board and interface board locat
e
beneath the monitor.[figure. 13]
[figure. 13]
V G A ( 6 p i n )
P o w e r ( 2 4 p i n )
(M/B, HDD,
V G A ( 9 p i n )
M i c ( 2 p i n )
L E D ( 7 p i n )
AIO(DAE) 0.3.30 3:39 PM ‰¿Ã¡ˆ16
2. Upgrading Memory and Changing the backup Battery
This section is to describe that upgrading memory and Changing t
h
backup battery.
Upgrading Memory
This model has 64 Mbytes memory as a default and you can upgrade ma
256 Mbytes when you need.
How to install
1) Locate the two clips that hold the memory module in place. One cli
holds the left edge of the module and the other clip holds the right edge
2) Push both clips away from the socket.
3) Position the DIMM over the socket so that the notch at the bottom of th
module lines up over the divider in the socket. As shown in the nex
picture, match the wide part of the module to the wide part of th
opening in the socket.
4) Push the module straight down into the socket.
Daewoo Telecom Lt
D I M M
Memory module
DIMM Socket
n o t c h e s
To insert DIMM module :
Position botton notches
over socket dividers
s h o w n
AIO(DAE) 0.3.30 3:39 PM ‰¿Ã¡ˆ17
How to re m o v e
1) Locate the two clips that hold the memory module in place. One cl
i
holds the left edge of the module and the other clip holds the right edge
2) Push one clip away from the module. Then, while holding the modul
with one hand, push the other clip away from the module.
3) Lift the module out of the socket.
DIMM
Memory module
DIMM Socket
AIO(DAE) 0.3.30 3:39 PM ‰¿Ã¡ˆ18
Changing the Battery
1) A mercury cell is located in the center of main board to keep setup da
t
of CMOS
2) If you see the case part, you could find protruding part(). Kee
pushing this protruding part and remove existing cell then install new
cell. If you are using metallic driver to push, try not to touch any othe
part with the metallic tool.
There is the danger of an explosion if the battery is incorrectl
replaced.
Replace the battery with the same or equivalent type
recommended by the manufacturer.
Discard used batteries according to the battery manufacturer’s
instructions.
[figure. 14]
Daewoo Telecom Lt
push this Side battery to this side.
AIO(DAE) 0.3.30 3:39 PM ‰¿Ã¡ˆ19
3. Assembling Drawing
1) You can assemble PC with reverse order of disassembling. First of a
l
please check if all part is attached firmly.
2) Connect body and monitor with cable.
3) Put in PC body after fitting and .(FDD,CDROM is front)[figure. 15
4) Drive these screw. [figure. 16]
[figure. 15]
[figure. 16]
AIO(DAE) 0.3.30 3:39 PM ‰¿Ã¡ˆ20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48

Daewoo D@eBox User manual

Category
PC/workstation barebones
Type
User manual

Daewoo D@eBox is a personal computer that offers a range of features and capabilities to enhance your productivity and entertainment experience.

With its compact and stylish design, the Daewoo D@eBox fits seamlessly into any modern workspace or home environment. The 15-inch monitor provides a clear and vibrant display, perfect for viewing documents, spreadsheets, presentations, and multimedia content.

Under the hood, the Daewoo D@eBox is powered by a reliable processor and ample memory, ensuring smooth and responsive performance for everyday tasks such as web browsing, email management, and office applications. It also comes equipped with a generous storage capacity, providing ample space for your files, documents, music, and videos.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI