American Standard 0000.442.002 Installation guide

Category
Sanitary ware
Type
Installation guide
0000.441
0000.451
0000.461
0000.551
U.S. Patent No. D403,750
Installation
Instructions
Certified to comply with ANSI A112.18.1
HANDLE KITS
INSTALLATION (PORCELAIN CROSS)
Install STEM ADAPTER (1) on VALVE STEM (2). Push HANDLE BASE (3) onto STEM ADAPTER (1).
Push DECORATIVE RING (4) onto bottom of HANDLE (9). Select desired handle position and assemble HANDLE (9) to HANDLE BASE (3).
Install ATTACHMENT SCREW (5) and WASHER (6) and tighten. Press in INDEX BUTTON (7).
INSTALLATION
Turn valve clockwise to "off" position.
1
M968701 Rev. 1.1
Hot
Cold
Off
5
4
8
10
11
9
6
7
2
3
3
1
Turn valve clockwise to "off" position.
Install STEM ADAPTER (1) on VALVE STEM (2). Push HANDLE BASE (3) onto STEM ADAPTER (1).
Assemble GASKET (8) onto ADAPTER SLEEVE (10). Push ADAPTER SLEEVE (10) into HANDLE BASE (3).
Select desired handle position and assemble PORCELAIN HANDLE (11) to ADAPTER SLEEVE (10).
Install ATTACHMENT SCREW (5) and WASHER (6) and tighten. Press in INDEX BUTTON (7).
Thank you for selecting American-Standard...
the benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--
please read these instructions carefully before you begin.
Turn off water at
main supply.
CAUTION
MODEL NUMBERS
HANDLE KITS
0000.441
0000.451
0000.461
0000.551
042692-0070A
PORCELAIN CROSS HANDLE
909396-YYY0A
DECORATIVE ADAPTER
0000.461
066152-YYY0A
HANDLE BASE
M918450-0070A
ADAPTER
042675-YYY0A
INDEX BUTTON
M914431-0070A
WASHER
A918511-0070A
ATTACHMENT SCREW
0000.441
0000.451
0000.551
066154-YYY0A
INDEX BUTTON
066147-YYYOA
LEVER HANDLE
066155-YYYOA
DECORATIVE RING
066152-YYY0A
HANDLE BASE
M914431-0070A
WASHER
A918511-0070A
ATTACHMENT SCREW
M918450-0070A
ADAPTER
066154-YYY0A
INDEX BUTTON
066148-YYY0A
CROSS HANDLE
066155-YYYOA
DECORATIVE RING
066152-YYY0A
HANDLE BASE
M914431-0070A
WASHER
A918511-0070A
ATTACHMENT SCREW
M918450-0070A
ADAPTER
066154-YYY0A
INDEX BUTTON
066148-YYY0A
CROSS HANDLE
066155-YYYOA
DECORATIVE RING
066153-YYY0A
HANDLE BASE
M914431-0070A
WASHER
A918511-0070A
ATTACHMENT SCREW
M918450-0070A
ADAPTER
2
CHROME
WHITE
BLACKNICKEL
BLACK SMITH
POLISHED BRASS
SATIN/CHROME
SATIN NICKEL
SATIN/BRASS
CHROME/BRASS
002
020
062
078
099
221
295
297
299
Replace the "YYY" with
appropriate finish code
M968701 Rev. 1.2
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A
CLOTH WITH A COARSE SURFACE.
CARE INSTRUCTIONS:
For toll-free information and answers to your questions, call:
1-800-442-1902
Weekdays 8:00 a.m. to 6:00 p.m. EST
IN CANADA 1-800-387-0369 (TORONTO 1-905-306-1093)
Weekdays 8:00 a.m. to 7:00 p.m. EST
IN MEXICO 01-800-839-12-00
Product names listed herein are trademarks of American Standard Inc.
© AS America, Inc. 2008
HOT LINE FOR HELP
Turn off hot and cold water
supplies before beginning.
CAUTION
1
0000.452 - 2 Hdl Kit
0000.453 - 3 Hdl Kit
0000.442 - 2 Hdl Kit
0000.443 - 3 Hdl Kit
0000.552 - 2 Hdl Kit
0000.553 - 3 Hdl Kit
INDEX
BUTTON
DECORATIVE
RING
SCREW
HANDLE
ESCUTCHEON
SCREW
HANDLE
ADAPTER
VALVE STEM
REMOVE &
DISCARD
(if present)
WASHER
0000.452 0000.443
0000.453 0000.552
0000.442 0000.553
Certified to comply with ANSI A112.18.1M
US Patent D372299, D968170
M968170 Rev. 1.2
Installation
Instructions
Turn VALVE to OFF position.
Remove and discard HANDLE ADAPTER and
SCREW--if present on fitting.
Push ESCUTCHEON onto VALVE STEM.
Push DECORATIVE RING onto bottom of HANDLE.
Select desired handle position and assemble
HANDLE to ESCUTCHEON.
Install SCREW and WASHER and tighten.
Press in INDEX BUTTON.
HANDLE KITS
Thank you for selecting American-Standard...
the benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--
please read these instructions carefully before you begin.
0000.452 0000.443
0000.453 0000.552
0000.442 0000.553
2
3
SPRING
CLIP
STOP
WASHER
90˚
M968170 Rev. 1.2
SERVICE
To change direction of handle rotation, proceed as follows:
Turn VALVE to OFF position.
Remove INSERT and HANDLE SCREW.
Slip HANDLE with ADAPTER off.
Remove SPRING CLIP.
Lift STOP WASHER, turn 90˚ and replace.
Replace SPRING CLIP.
Replace ADAPTER, HANDLE SCREW, and INSERT.
HOT LINE FOR HELP
For toll-free information and answers to your questions, call:
1 (800) 442-1902
Weekdays 8:00 a.m. to 8:00 p.m. EST
IN CANADA 1-800-387-0369 (TORONTO 1-905-306-1093)
Weekdays 8:00 a.m. to 7:00 p.m. EST
Product names listed herein are trademarks of American Standard Inc.
© AS America, Inc.2009
IN MEXICO 01-800-839-12-00
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A
CLOTH WITH A COARSE SURFACE.
CARE INSTRUCTIONS:
0000.442/443
0000.452/453
0000.552/553
066153-YYY0A
HANDLE BASE
066154-YYY0A
INDEX BUTTON
066147-YYYOA
LEVER HANDLE
066155-YYYOA
DECORATIVE RING
066152-YYY0A
HANDLE BASE
M914431-0070A
WASHER
084043-0070A
ATTACHMENT SCREW
084043-0070A
ATTACHMENT SCREW
084043-0070A
ATTACHMENT SCREW
066154-YYY0A
INDEX BUTTON
M914431-0070A
WASHER
066148-YYY0A
CROSS HANDLE
066155-YYYOA
DECORATIVE RING
066152-YYY0A
HANDLE BASE
CHROME
WHITE
BLACKNICKEL
BLACK SMITH
POLISHED BRASS
SATIN/CHROME
SATIN NICKEL
SATIN/BRASS
CHROME/BRASS
002
020
062
078
099
221
295
297
299
Replace the "YYY" with
appropriate finish code
066154-YYY0A
INDEX BUTTON
M914431-0070A
WASHER
066148-YYY0A
CROSS HANDLE
066155-YYYOA
DECORATIVE RING
MODEL NUMBERS
HANDLE KITS
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

American Standard 0000.442.002 Installation guide

Category
Sanitary ware
Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI