0000.431
0000.541
0000.571
U.S. Patent No. D403,750
Installation
Instructions
Certified to comply with ANSI A112.18.1
LEVER HANDLE KITS
2
Push DECORATIVE RING (6) on bottom of
LEVER HANDLE (7) past RETAINING GROOVE (8).
Select desired handle position and
assemble HANDLE (7) to HANDLE BASE (3).
Tighten SET SCREW (9) with 3/32" allen key and slide
DECORATIVE RING (6) over RETAINING GROOVE (8).
INSTALL HANDLE
Ho
t
Co
ld
Off
5
4
89
6
7
2
3
1
3
Turn off hot and cold water supplies before beginning.
INSTALLATION
CAUTION
Turn valve clockwise to "off" position.
Tighten ATTACHMENT SCREW (5) to secure HANDLE BASE (3) to VALVE STEM (2).
Install STEM ADAPTER (1) on VALVE STEM (2). Push HANDLE BASE (3) onto STEM ADAPTER (1).
Assemble ADAPTER SLEEVE (4) and ATTACHMENT SCREW (5). Make sure tapered end of
ADAPTER SLEEVE (4) is facing into STEM ADAPTER (1).
1
M968702 Rev. 1.2
Thank you for selecting American-Standard...
the benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--
please read these instructions carefully before you begin.
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A
CLOTH WITH A COARSE SURFACE.
CARE INSTRUCTIONS:
