MULTI MOVEMENT GUIDE
- 1 -
SIMPLE ANALOG
TIME SETTING
1. Pull the crown out to position 2.
2. Turn clockwise and set the time.
1
2 3
DATE
1
2
1
2 3
DATE
DAY
A
1
2 3
B
MINUTE
HAND
HOUR
HAND
SECOND
HAND
1 2 3
B
A
CHRONOgRApH
1/5 SECOND HAND
SECOND
HAND
CHRONOgRApH
MINUTE HAND
DATE
A
1 2 3
B
24-HOUR
HAND
MINUTE
HAND
SECOND
HAND
CHRONOGRAPH B
TIME AND DATE SETTING
1. Pull crown out to position 2.
2. Rotate crown clockwise until the previous
day’s date is shown in the date window.
3. Pull crown out to position 3.
4. Rotate crown clockwise until the correct
date is shown in the date window.
5. Continue to rotate crown to set correct am/pm time.
6. Return crown to position 1.
NOTE: Do not set the date between 9:00 p.m. and
12:30 a.m. to ensure accuracy.
CHRONOGRAPH OPERATION
1. Press A to start/stop the chronograph.
2. Press B to restart/reset.
NOTE: After 2 hours of continuous running, the
chronograph will automatically stop and reset to save
the battery.
SPLIT TIME
1. Press B while the chronograph is running.
2. Press B again to return to the chronograph.
3. Press A to finalize timing.
4. Press B to reset.
CHRONOGRAPH ZERO RESET
1. If either of the chronograph hands is not at the zero
(12:00) position, pull crown out to position 2.
2. Press B to reset chronograph minute hand. Each press
of B will advance the chronograph minute hand by one
increment or press and hold B for fast advance.
3. Press A to reset chronograph 1/5 second hand. Each
press of B will advance the chronograph 1/5 second
hand by one increment or press and hold B for fast
advance.
CHRONOGRAPH A
TIME SETTING
1. Pull crown out to position 3.
2. Turn crown to set the desired time.
3. Return crown to position 1.
DATE SETTING
1. Pull crown out to position 2.
2. Turn crown counter-clockwise until the
correct date is shown in the date window.
3. Return crown to position 1.
CHRONOGRAPH OPERATION
1. Press
A to start/stop the chronograph.
2. Press B for reset.
ADJUSTING THE CHRONOGRAPH
1. Pull crown to position 3.
2. Press
A to reset the second hand to “0.”
3. Press B to reset the chronograph minute and hour hands.
4. Reset the watch to the current time and return crown to
position 1.
DAY/DATE WATCH
DATE SETTING
1. Pull the crown out to position 2.
2. Turn clockwise and set the date for the previous day.
DAY SETTING
With crown still in position 2, turn counter-clockwise and
set the day for the previous day.
TIME SETTING
1. Pull crown out to setting 3.
2. Turn counter-clockwise to advance the time and continue
until the day/date changes to the present day.
3. Set the correct time.
4. Push crown back to position 1.
DATE WATCH
DATE SETTING
1. Pull the crown out to position 2.
2. Turn counter-clockwise and set the date for the
previous day.
TIME SETTING
1. Pull crown out to setting 3.
2. Turn counter-clockwise to advance the time and continue
until the day/date changes to the present day.
3. Set the correct time.
4. Push crown back to position 1.
CHRONOGRAPH C
TIME AND DATE SETTING
1. Before setting the time, make sure the
chronograph is stopped and set to zero
(12:00) position.
2. Pull crown out to position 2.
3. Turn crown clockwise until the previous day’s
date is displayed.
4. Pull crown out to position 3 when the second
hand is at the 12:00 position.
5. Turn crown to set time.
NOTE: 24-hour hand moves correspondingly with
the hour and minute hands. When setting the time
be sure to check that the 24-hour hand is set properly.
6. Return crown to position 1.
NOTE: When the crown is in position 2, do not press the
pushers. Otherwise the chronograph hands will move.
CHRONOGRAPH
1. Press A to start/stop the chronograph.
2. Press B to reset to zero.
SPLIT TIME
1. Press B while the chronograph is running.
2. Press B again to return to the chronograph.
3. Press A to finalize timing.
4. Press B to reset.
CHRONOGRAPH ZERO RESET
1. If either of the chronograph hands is not at the zero
(12:00) position, pull crown out to position 3.
2. Press A to move hands clockwise; press B to move
hands counter-clockwise.
3. Return crown to position 1.
MULTI MOVEMENT GUIDE
- 2 -
DIGITAL D
NORMAL TIME DISPLAY
1. Press A to change mode. Mode sequence is normal
time, chronograph, alarm, and time setting.
2. Press B for EL.
3. Press C to display date.
4. Press D to display alarm.
5. Press A+D to toggle chime on/off. (all days of week
will display for “on”.)
6. Press C+D to toggle alarm on/off.
CHRONOGRAPH MODE
1. Press A to change to chronograph mode.
2. Press C to start/stop the chronograph.
3. Press D to reset to zero.
NOTE: Press A while the chronograph is running to return
to normal time display; chronograph will continue running.
SPLIT TIME
1. Press D while the chronograph is running for split time.
2. Press D again to measure multiple split times.
3. Press C to finalize timing.
4. Press D to scroll through all counts.
5. Press D again to reset to zero.
ALARM SETTING
1. Press A to change to alarm setting mode; hour will begin
flashing.
2. Press C to increase digit; press and hold C for fast
advance.
3. Press D to confirm.
4. Press D again to toggle to minutes.
5. Press C to increase digit; press and hold C for fast
advance.
6. Press A to save data and return to normal time display.
NOTE: Alarm will sound at preset time for 60 seconds.
Press D to silence alarm, or press C for 5 minute snooze.
TIME AND CALENDAR SETTING
1. Press A to change to time and calendar setting; seconds
will begin flashing.
2. Press C to set seconds to zero.
3. Press D to advance to minutes.
4. Press C to advance digit; press and hold C for fast
advance.
5. Press D to advance to next setting value.
6. Setting sequence is: seconds, minutes, hour, date,
month, weekday.
7. Press D to exit setting mode.
NOTE: When setting the hour, “H” will be displayed for
24-hour format; “A” or “P” for 12-hour format.
B
D
A
C
DIGITAL BJ2718
B D
A
C
DIGITAL BJ2679
DIGITAL BJ2957
DIGITAL A
NORMAL TIME DISPLAY
1. Press A to change mode. Mode sequence is: normal
time, chronograph, alarm, time setting.
2. Press B to display alarm.
3. Press C to display date.
4. Press A+B to toggle chime on/off (all days of the week
will display for “on”).
5. Press B+C to toggle alarm on/off. Alarm will sound for 60
seconds; press B to silence alarm or press D for snooze
function (alarm will sound 5 minutes later).
CHRONOGRAPH MODE
1. Press A to change to chronograph mode.
2. Press C to start/stop the chronograph.
3. Press B when the chronograph is stopped to reset.
NOTE: When the chronograph is running, press A to
return to normal time display. Chronograph will continue
to count time.
SPLIT TIME
1. Press B while the chronograph is running.
2. Press C to finalize timing.
3. Press B to display all counts.
4. Press B again to reset.
ALARM MODE
1. Press A to change to alarm mode; hour will begin
flashing.
2. Press C to increase digits; press and hold C for
fast advance.
3. Press B to advance to minutes.
4. Press C to increase digits; press and hold C for
fast advance.
5. Press B to save data.
6. Press A to exit and return to normal time display.
TIME AND DATE SETTING
1. Press A to change to time setting mode; seconds will
begin flashing.
2. Press C to reset seconds to zero.
3. Press B to advance to minutes.
4. Press C to increase digits; press and hold C for
fast advance.
5. Press B to set and advance to next setting value.
6. Setting sequence is: seconds, minute, hour, date,
month, weekday.
NOTE: When setting the hour, “H” will display for 24-hour
format, “A” or “P” will display for 12-hour format.
A
B
C
B
A
DIGITAL FL137AX
(2 pushers)
A
123
B
DIGITAL FL137AX
(2 pushers)
DIGITAL B
NORMAL TIME DISPLAY
1. Press A to change display. Display sequence is time,
calendar, seconds.
2. Press B to toggle 12/24-hour format.
TIME AND DATE SETTING
1. Press and hold B for 2 seconds to enter setting mode;
year will begin flashing.
2. Press A to advance digit; press andhold A for
fast advance.
3. Press B to set and advance to next setting value.
4. Setting sequence is year, month, date, hour, minute.
5. Press B to exit setting mode.
NOTE: Hour will be displayed in 24-hour format in time
setting mode.
NOTE: If no pusher/button is operated for 30 seconds, all
changes will be saved and the setting will automatically
return to display mode.
DIGITAL C
NORMAL TIME DISPLAY
1. Press A for EL.
2. Press A to display date.
TIME AND DATE SETTING
1. Press B to enter setting mode; seconds will begin
flashing.
2. Press A to set seconds to zero and return to normal time
display.
3. Press B twice to set hour.
4. Press A to increase digit; press and hold A for fast
advance.
5. Setting sequence is hour, minutes, month and date.
6. Press B to exit setting mode.
B
A
DIGITAL E
NORMAL TIME DISPLAY
Press A to change display. Display sequence is normal
time, date, seconds.
TIME AND CALENDAR SETTING
1. In normal time display, press B twice; month will begin
flashing.
2. Press A to increase digits.
3. Press B to advance to next setting value.
4. Setting sequence is: month, date, hour, and minute.
5. Press B to exit setting mode.
NOTE: At any point in setting mode, press A to exit
setting mode and return to normal time display.
B
D
A
C
A
B
MULTI MOVEMENT GUIDE
- 3 -
DZ4185DZ4177 DZ4186
Time 2
CHRONOGRAPH C
(crown)
CHRONOGRAPH C
(pusher B)
CHRONOGRAPH C
(pusher A)
Time 1
SIMPLE
ANALOG
(crown)
Each movement uses a different battery.
DZ7178DZ7177 DZ7179
Time 3
SIMPLE
ANALOG
(crown)
Time 2
SIMPLE ANALOG
(crown)
Time 1
DIGITAL C
(pusher A)
Time 1
DIGITAL C
(pusher B)
DZ7174DZ7173 DZ7175
Time 2
SIMPLE ANALOG
(crown)
Time 3
SIMPLE ANALOG
(crown)
DIGITAL D
(pusher C)
DIGITAL D
(pusher D)
DIGITAL D
(pusher A)
Time 1
DIGITAL D
(pusher B)
DZ7208DZ7196 DZ7209
Time 1
SIMPLE ANALOG
(crown)
Time 3
SIMPLE ANALOG
(crown)
DIGITAL D
(pusher D)
DIGITAL D
(pusher C)
DIGITAL D
(pusher B)
Time 2
DIGITAL D
(pusher A)
DZ9060 DZ9061
Time 3
CHRONOGRAPH B
(crown)
CHRONOGRAPH B
(pusher B)
CHRONOGRAPH B
(pusher A)
Time 1
SIMPLE
ANALOG
(crown)
Time 2
SIMPLE
ANALOG
(crown)
DZ7153 DZ7191 DZ7192DZ7157
Time 1
CHRONOGRAPH C
(crown)
CHRONOGRAPH C
(pusher B)
CHRONOGRAPH C
(pusher A)
Time 2
DIGITAL B
(pusher B)
DIGITAL B
(pusher A)
DIGITAL B
(pusher C)
MULTI MOVEMENT GUIDE
- 4 -
DZ7126 DZ7193DZ7125 DZ7127 DZ7194
Time 2
DIGITAL B
(pusher B)
Time 1
CHRONOGRAPH A
(crown)
CHRONOGRAPH A
(pusher B)
CHRONOGRAPH A
(pusher A)
Time 4
SIMPLE
ANALOG
(crown)
Time 2
DIGITAL B
(pusher A)
Time 3
SIMPLE
ANALOG
(crown)
Time 1
SIMPLE ANALOG
(crown)
Time 3
SIMPLE ANALOG
(crown)
Time 2
SIMPLE
ANALOG
(crown)
Sonar Radar
Animation Module
(pusher for sonar
animation on/off)
DZ1242 DZ1243
DZ7101 DZ7158
Time 2
SIMPLE ANALOG
(crown)
Time 3
DIGITAL B
(pusher A)
Time 3
DIGITAL B
(pusher B)
Time 1
DATE
WATCH
(crown)
DZ7206 DZ7207
Time 2
DIGITAL E
(pusher A)
Time 3
SIMPLE ANALOG
(crown)
DIGITAL E
(pusher B)
Time 1
SIMPLE ANALOG
(crown)
DZ1319DZ1318 DZ1320
Time 1
CHRONOGRAPH B
(crown)
CHRONOGRAPH B
(pusher B)
CHRONOGRAPH B
(pusher A)
Time 2
SIMPLE ANALOG
(crown)
Compass
Each movement uses a different battery.
LED
(pusher for
LED on/off)
MULTI MOVEMENT GUIDE
- 5 -
DZ9048
DZ9044
DZ9046
DZ9053DZ9052
DZ9049
DZ9045
DZ9047
DZ9054
Time 2
SIMPLE
ANALOG
(crown)
DZ9050DZ9025 DZ9051
Time 5
CHRONOGRAPH A
(crown)
CHRONOGRAPH A
(pusher B)
SIMPLE ANALOG
(crown)
Time 2
SIMPLE ANALOG
(crown)
Time 1
Time 3
SIMPLE ANALOG
(crown)
Time 4
SIMPLE ANALOG
(crown)
CHRONOGRAPH A
(pusher A)
DZ9042 DZ9043
Each movement uses a different battery.
Time 1
SIMPLE ANALOG
(crown)
Time 3
SIMPLE ANALOG
(crown)
Time 2
SIMPLE ANALOG
(crown)
Time 1
SIMPLE
ANALOG
(crown)
Time 2
SIMPLE
ANALOG
(crown)
Time 4
SIMPLE
ANALOG
(crown)
Time 3
SIMPLE
ANALOG
(crown)
Time 3
SIMPLE
ANALOG
(crown)
Time 2
SIMPLE
ANALOG
(crown)
Time 1
CHRONOGRAPH A
(crown)
CHRONOGRAPH A
(pusher A)
CHRONOGRAPH A
(pusher B)
Time 1
DAY/DATE
WATCH
(crown)
/
