2. Mean Well
  3. APV-25 Series 25W Single Output Switching Power Supply

Mean Well APV-25 Series 25W Single Output Switching Power Supply User manual

  • Hello! I'm your chat assistant. I've reviewed the user manual for the MEAN WELL APV-25 Series Switching Power Supply. This document details the device's features, including its constant voltage mode, surge protection, and overload protection. I'm ready to answer your questions about using this device. Let me know how I can help!
  • What is the input voltage range for this power supply?
    What kind of protection does the power supply offer?
    What is the warranty period for this power supply?
Home » MEAN WELL » MEAN WELL APV-25 Series 25W Single Output Switching Power Supply User Manual
Contents
1 MEAN WELL APV-25 Series 25W Single Output Switching
Power
2 Features
3 SPECIFICATION
4 Mechanical Specification
5 Diagram
6 Documents / Resources
6.1 References
7 Related Posts
MEAN WELL APV-25 Series 25W Single Output Switching Power
MEAN WELL APV-25 Series 25W Single Output Switching
Power Supply User Manual
Manuals+ — User Manuals Simplified.
Features
Constant voltage mode power supply
Universal AC input /Full range
Withstand 300VAC Surge input for 5 seconds
Protections: Short circuit/Over load/Over voltage
Fully isolated plastic case
Cooling by free air convection
Small and compact size
IP42 design
Class 2 power unit
Pass LPS
100% full load burn-in test
Low cost, high reliability
Suitable for LED related fixture or appliance (such as LED Decoration or Advertisement devices)(Note.9)
2 years warranty 1C a 4COOEIne.4OI 401
SPECIFICATION
NOTE
All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25’C of ambient
temperature.
Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf &
47uf parallel capacitor.
Tolerance: includes set up tolerance, line regulation and load regulation.
Derating may be needed under low input voltage. Please check the static characteristics for more details.
The power supply is considered as a component that will be operated in combination with final equipment.
Since EMC performance will be affected by the complete installation, the final equipment manufacturers must
re-qualify EMC Directive on the complete installation again.
Length of set up time is measured at the first cold start. Turning ON/OFF the power supply may lead to
increase of the set up time.
The ambient temperature derating of 3.5 C/1000m with fanless models and of 5C/1000m with fan models for
operating altitude higher than 2000m(650oft).
For any application note and IP waterproof function installation caution, please refer our user manual before
using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf
This product is not intended for LED lighting luminaire applications in the EU.(In the EU the LPF/NPF/XLG
series are recommended.)
To fulfill the requirements of latest ErP regulation for lighting luminaires, this LED Driver can only be used
behind a switch without being permanently connected to mains.
x Product Liability Disclaimer: For detailed information, please refer to https://www.meanwell.com/service
Disclaimer.aspx
Mechanical Specification
Diagram
Block Diagram
Derating Curve
Static Characteristics
Documents / Resources
MEAN WELL APV-25 Series 25W Single Output Switching Power Supply [pdf] User Manual
APV-25 Series, 25W Single Output Switching Power Supply, APV-25 Series 25W Single Output
Switching Power Supply, Single Output Switching Power Supply, Output Switching Power
Supply, Switching Power Supply, Power Supply
References
Product Liability Disclaimer-MEAN WELL Switching Power Supply Manufacturer
Manuals+,
/