2. LEDPRO
  3. BY NORLUX TANIA MINI S1 LAMPE, HVIT

LEDPRO BY NORLUX TANIA MINI S1 LAMPE, HVIT Installation guide

  • Hello! I've reviewed the installation manual for the Tania Mini S1 light. This manual includes important safety notes, installation instructions, and maintenance guidelines. It's crucial that the installation is performed by a qualified electrician and that power is turned off before installation. I'm ready to assist with any questions about the installation process or safety precautions for this light fixture.
  • Can anyone install this product?
    What should I do before installation?
    Can I use any cleaning products on this product?
Safety Notes:
•The product must be installed, maintained, and operated
as instructions below.
•Before starting installation of this product, make sure
power supply is disconnected.
•Only to be installed by authorized electrician.
•Do not use abrasives or solvents when cleaning.
•Do not install the product if it appears damaged in
any way. Check with manufacturer if in doubt.
•Do not modify this fitting in any matter as this will
void warranty.
•Check protection class, if class I, it must be earthed.
•Disconnect power supply before maintenance or cleaning.
Sikkerhetsinformasjon:
•Følg installasjonsmanual for korrekt montering.
•Koble alltid fra strømmen før montering eller vedlikehold.
•Kan kun monteres av autorisert elektriker.
•Monter ikke produktet hvis det er synlig skade.
Kontakt forhandler eller produsent.
•Bruk ikke løsemidler ved rengjøring
•Produktet skal ikke under noen omstendigheter
endres eller modifiseres.
•Sjekk produktets isolasjonsklasse.
Ved isolasjonsklasse I skal produktet jordes.
Tania Mini S1
INSTALLATION MANUAL
Imported by Norlux AS | Borgeskogen 32, 3160 Stokke, Norway | norlux.com
ART. NO.
101081-2
101081-3
/