Dacota Platinum P1000 TRÅDLØS USB-PRESENTER Owner's manual

Type
Owner's manual
WIRELESS DIGITAL PRESENTER
EN EN
EN-1
EN
EN-2
EN
EN-3
EN
EN-4
EN
EN-5
EN
EN-6
EN
EN-7
Key Funtions
Laser hole
LED
Mode
Page up
Page down
Laser button
USB Receiver
Buttons Function description
Laser hole Laser hole exit, do not direct to eyes
LED
1
2
3
4
5
6
7
8
9
10
11
Red:working status; Blue:charging status;
Red flashing:low battery
LED is off when fully charged.
Mode
Double press to change modes:
Spotlight, Magnifier, Digital laser.
Long press:using the current mode.
Page up
Turn to previous page. Long press, PPT enter full
screen. Long press again, PPT out of full screen
Page down Turn to next page
. Long press, PPT enter black
screen. Long press again, PPT out of black screen
Laser button Press this key, the laser will shoot out,
and the work indicator will also be on.
USB Receiver
Power Power on/off
Charging port USB-C Charging port
+Volume up
-Volume down
Get started on Windows
Step : Pull out the USB receiver, turn on the power.
Step : Plug the USB receiver to Computer USB port.
It may takes few minutes waiting for computer's
recognition when it is the first time in use.
You can customize how to use your presenter by installing
software on you computer.
The software is also needed if special functions like digital
laser, highlighter and magnifier.
Please download the software from the product page on
power.no / power.dk / power.fi / power.se.
Search for DPP1000MGY
a. Double Click (.exe) for auto installation. When the
installation is done, you will see on desktop.
b. Double click H to activate. The H will stay under the bar.
Get started on Mac
b. Click keyboard g. Select ANSI keyboard and click "Done"
d. Click “continue”
e. Press the key next to left shift
c. Click “change keyboard type f. Click “skip”
Step : Pull out the USB receiver, turn on the power.
Step : Plug the USB receiver to Mac. (You many need an
external USB Hub.)
Step : Keyboard setting. (Only for the 1st time use.)
a. Open system preferences
When calibration is needed, please locate the presenter on flat
position. Press "up" and "down" at the same time till LED blinks
then release. After releasing, LED will stop blinking. Calibration
is done.
Setting UI
1
1
2
3
2
c. Blue means on. Grey means off. After USB
receiver is plugged out of computer, it will turn grey.
Notes for battery disposal
This symbol on the product or in the instructions
means that your electrical and electronic equipment
should be disposed at the end of its life separately
from your household waste.
There are separate collection systems for recycling
in the EU.
For more information, please contact the local
authority or your retailer where you purchased the
product.
The batteries used with this product contain chemicals
that are harmful to the environment.
To preserve our environment, dispose of used batteries
according to your local laws or regulations.
Do not dispose of batteries with normal household waste.
For more information, please contact the local authority
or your retailer where you purchased the product.
EN
EN-8
Safety Measures
Laser radiation. Do not stare into the beam or view
directly with optical instruments. Class 2 laser product.
Never point a laser beam into a person's eyes or view a
laser beam directly, as prolonged exposure can be
hazardous to the eyes.
Momentary exposure from a laser pointer, such as an
inadvertent sweep of the light across a person's eyes,
may cause temporary flash blindness similar to the effect
of a camera flash bulb.
Although this condition is temporary, it can become more
dangerous if the exposed person is engaged in a vision
critical activity such as driving.
Package Content
Wireless digital presenter
USB C charging cable
USB receiver
PU case
User Manual
DPP1000MGY
Power
Charging Port
Software installation:
  • Page 1 1

Dacota Platinum P1000 TRÅDLØS USB-PRESENTER Owner's manual

Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI