2. TW Steel
  3. VD54
VD54

TW Steel VD54 User manual

  • Hello! I'm a chat assistant that has reviewed the user manual for the TW Steel VD54 watch. This document covers maintenance, crown types, stopwatch functionality, and time settings, ensuring you make the most of your new watch. I am ready to answer your questions about these topics or any other aspects of the device.
  • How should I clean my TW Steel watch?
    What should I do if the watch comes into contact with hard or corrosive materials?
    How do I adjust the stopwatch hands to reset to '0' position?
VD54
SEIKO MOVEMENT
TW STEEL
MAINTENANCE
TW Steel uses the best materials and carries out
strict controls before the watch leaves the factory.
The way in which you wear or treat your TW Steel
will determine whether the appearance of the
watch is maintained in the future, or whether it will
deteriorate. In order to enjoy wearing your TW Steel
as long as possible, we include a number of tips: If
the watch comes into contact with hard or corrosive
materials, this can cause damage, which, if it occurs
regularly, will become clearly visible in the form of
scratches.
Your watch should be cleaned with a soft cotton cloth
that is not impregnated with any cleaning material.
Absolutely no cleaning materials should be used. It
is advisable to regularly polish your watch with a soft
cotton cloth. The watch is a precision mechanical
instrument and should be treated as such. Adjusting
the time or date, opening or closing the crown or
crowncap, should not be done roughly, but carefully.
TW Steel is a watch brand harmoniously combining both design and
innovation. ‘The Watch in Steel’ leads the oversized market with style and
quality guaranteed. TW Steel values the most important relationship of all
– the one with the consumer. To express this, we hereby give you all the
information that you need to enjoy your TW Steel watch to the fullest.
VD54 SEIKO MOVEMENT
CAUTION : IF THE CROWN IS NOT PRESSED IN PROPERLY, THE WATCH IS NO
LONGER WATERPROOF AND THE MOVEMENT CAN BE SERIOUSLY DAMAGED!
DISPLAY AND CROWN / BUTTONS 1. Pull out the crown.
2. Press the button or to reset the stopwatch second
and minute hands to the“ 0” position. The second hand
stops immediately.
*By pressing the button , the STOPWATCH second and minute
hands position could be reset. (counter-clockwise direction).
*By pressing the button , the STOPWATCH second and minute
hands position could be reset. (clockwise direction).
3. Push the crown back to the normal position.
HOW TO ADJUST THE STOPWATCH
HANDS POSITION
If the stopwatch is functioning: A → B
If the stopwatch is stopped: B
If the split time is displayed: B → A → B
CROWN
There are two types of crown, a normal crown and a screw-lock
type crown. Please check the type of the crown of your watch.
HOW TO SET THE DATE AND TIME
*Before setting the time, make sure to check that the stopwatch
measurement is stopped.
1. Pull out the crown when the second hand is at the 12 o’clock
position. The second hand will stop immediately.
*Do not press any button, as this will move the stopwatch hands.
2. Turn the crown to set the minute hand to the desired time.
3. Push the crown back to the normal position in accordance
with a time signal.
*If your watch has a screw-lock type crown, the crown screws into
the watch to prevent malfunction and increase water resistance.
*Be careful not to screw the crown in by force as it may damage
the slots of the crown.
Button A
Crown
First click *Time setting
Button B
Minute hand
Second hand
STOPWATCH minute hand
STOPWATCH second hand
Hour hand
24-hour hand (Indicate the
time on a 24-hour basis)
While pressing
the crown in,
turn it in the
direction
indicated by the
arrow.
The crown
turns.
Normal crown
Pull out the crown and operate it.
Unlock the crown before operating it. After operating the
crown, lock it.
Unscrew
Screw
Screw-lock type crown
The crown does
not turn. (It
cannot be
turned any
further.) While pressing the
crown in
A
B
STOPWATCH
second hand
STOPWATCH
minute hand
Crown
13
2
13
2
Crown
/