Highwood Ladder Plant Stand Assembly Instructions

Highwood
Brand
Highwood
Model
Ladder Plant Stand
Type
Assembly Instructions
For information on Care and Cleaning or to register your
highwood product, please visit www.highwood-usa.com. PAGE 1 OF 2
INCLUDED TOOLS
5/32" HEX KEY
IMPORTANT!
DO NOT fully tighten the bolts until all
bolts are started. Once all bolts are inserted,
go back & tighten all the bolts.
Retain these instructions for future reference
HARDWARE
highwood
NATURE'S CLOSEST RIVAL
The Lawn & Garden Collection
Ladder Plant Stand
Assembly Guide
1) Place Left Shelf Support on Flat Surface as Shown. Slide Top Shelf
(With Elk Outdoor Badge) Over Top Support and Attach Using Two "A" Bolts.
AD- GRD-IN1-A
10.08.18
A
2) Repeat Step 1 On Other Side Attaching Shelf to Right Shelf Support.
x12
Bx2
1/4"-20 X 1-1/4"
1/4"-20 X 1-1/2"
A
TOP SHELF
LEFT SHELF SUPPORT
HIGHWOOD BADGE
For information on Care and Cleaning or to register your
highwood product, please visit www.highwood-usa.com. PAGE 2 OF 2
highwood
NATURE'S CLOSEST RIVAL
The Lawn & GardenCollection
Ladder Plant Stand
Assembly Guide
AD-GRD-IN1-A
10.08.18
LEFT SHELF SUPPORT
RIGHT SHELF SUPPORT
SHELF
SHELF
LEFT SHELF SUPPORT
RIGHT SHELF SUPPORT
A
A
B
B
LOWER BRACE
3) Attach Middle Shelf To Shelf Supports Using Four "A" Bolts.
4) Attach Bottom Shelf To Shelf Supports Using Four "A" Bolts.
5) Tighten All Bolts.
6) Rotate Plant Stand Into Upright Position.
7) Attach Lower Brace to Assembly Using Two "B" Bolts.
  • Page 1 1
  • Page 2 2

Highwood Ladder Plant Stand Assembly Instructions

Highwood
Brand
Highwood
Model
Ladder Plant Stand
Type
Assembly Instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers