NightOwl FWIP2-I User manual

Brand
NightOwl
Model
FWIP2-I
Type
User manual

NightOwl FWIP2-I: a smart indoor camera for your home security needs. With its easy setup and reliable performance, you can have peace of mind knowing your property is protected. It features a built-in microphone and speaker for two-way audio, allowing you to communicate with visitors or pets remotely. The camera's microSD card slot enables local storage of recorded footage for added security. Enjoy a wide field of view and clear night vision for round-the-clock surveillance. The NightOwl app provides remote access and control, allowing you to monitor your home from anywhere.

NightOwl FWIP2-I: a smart indoor camera for your home security needs. With its easy setup and reliable performance, you can have peace of mind knowing your property is protected. It features a built-in microphone and speaker for two-way audio, allowing you to communicate with visitors or pets remotely. The camera's microSD card slot enables local storage of recorded footage for added security. Enjoy a wide field of view and clear night vision for round-the-clock surveillance. The NightOwl app provides remote access and control, allowing you to monitor your home from anywhere.

Add your Camera
To begin viewing your camera, add it to the
Night Owl app or to a compatible recorder.
For more detailed setup steps, scan the QR
codes below.
Standalone
(Add to the App)
Ecosystem
(Add to a Recorder)
6
Status LED Guide
LED Status
Solid Red
Fast Blinking Blue
Slow Blinking Blue
Solid Blue
Fast Blinking Red & Blue
Camera Status
Camera Powering ON
Ready to Pair
Pairing / Reconnecting
Camera ON and Paired
Firmware Upgrade
7
Remove Protective Film
Quickly remove the clear protective film
from the camera lens.
8
Install the Camera
Your camera can be set up 3 different ways:
Use the stand and
place the camera on
a flat surface.
Remove the stand and
place the camera cube
on a flat surface.
a
b
cMount the camera
using the camera
stand and mounting
hardware.
9
5
Need Help?
We are here for you
Our support site is filled with self-help material.
From your support page you can use the Live
Chat feature or contact our Live Phone support.
1. Please visit Support.NightOwlSP.com
2. Enter FWIP2 into the Search bar
QSG-FWIP2-CM 2-091223
FCC RADIATION NORM
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause
undesired operation.
FCC Compliance Statement These limits are designed to provide reasonable protection
against frequency interference in residential installation. This equipment generates,
uses, and can radiate radio frequency energy, and if not installed or used in accordance
with the instructions, may cause harmful interference to radio communication.
However, there is no guarantee that interference will not occur in television reception,
which can be determined by turning the equipment off and on. The user is encouraged
to try and correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION!
The Federal Communications Commission warns the user that changes or
modifications to the unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This equipment
should be installed and operated with a minimum distance of 8 inches between the
radiator and your body.
Quick Setup Guide
Let’s get started
What’s Included
Indoor Camera with Mount USB Cable
Power Adapter Mounting Hardware
NOTE: If mounting the camera, you will need a screwdriver
or drill (not included).
2
Camera Details
Microphone
Lens
Status LED
Mounting Stand
Speaker
USB
Reset Button
microSD Card
3
Download the Night Owl App
If you are a first-time user, go ahead and
download the Night Owl app. Quickly create
an account and log in.
Already have an account? Simply log in.
4
Plug It In
Use the provided USB cable and power
adapter to plug your camera into an outlet.
NOTE: For initial setup/pairing, have your camera within 1 to
3 feet of your router or recorder.
5
  • Page 1 1
  • Page 2 2

NightOwl FWIP2-I User manual

Brand
NightOwl
Model
FWIP2-I
Type
User manual

NightOwl FWIP2-I: a smart indoor camera for your home security needs. With its easy setup and reliable performance, you can have peace of mind knowing your property is protected. It features a built-in microphone and speaker for two-way audio, allowing you to communicate with visitors or pets remotely. The camera's microSD card slot enables local storage of recorded footage for added security. Enjoy a wide field of view and clear night vision for round-the-clock surveillance. The NightOwl app provides remote access and control, allowing you to monitor your home from anywhere.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents