A - Headboard - 1 pc
Please read all instructions before beginning assembly
C - Side Rail - 2 pcs
Pre Assembly :
.
Place all parts on a carpet or foam in shipping box. Find the letter (A,B,C,...)
.
on each part and check with below part list to ensure we have all components.
Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts
.
or hardware.
This cart requires one people to do assembly.
.
BED
Parts Included :
B - Footboard - 1 pc
D - Slats - 1 set
ASSEMBLING INSTRUCTION
F - Wrench - 1 pc
Page 1 of 3
A
B C
D
Hardware Enclosed :
E - Hexagonal bolts - 8 pcs
A - Headboard - 1 pc
Please read all instructions before beginning assembly
C - Side Rail - 2 pcs
Pre Assembly :
.
Place all parts on a carpet or foam in shipping box. Find the letter (A,B,C,...)
.
on each part and check with below part list to ensure we have all components.
Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts
.
or hardware.
This cart requires one people to do assembly.
.
BED
Parts Included :
B - Footboard - 1 pc
ASSEMBLING INSTRUCTION
E - Wrench - 1 pc
Page 1 of 2
Hardware Enclosed :
D - Hexagonal bolts - 8 pcs
A
BC
3. Attach Footboard (B) to the components.
3.1. Please note the indicating letters for homing guidance.
3.2. Please hang the brackets to the Hexagonal bolts (E) and tighten by using Wrench (F)
(see below diagram).
C
B B
Page 2 of 3
1. Lay all components (A, B, C,...) onto clean smooth surface as carpet or cardboard.
Assembly Instructions :
2. Attach Side Rail (C) to the Headboard (A). Please carefully note
2.1. All letters at component that indicates homing destination
as not to misplace components.
2.2. Please hang the brackets to the Hexagonal bolts (E) and tighten by using Wrench (F)
(see below diagram).
A
C
A
C
E
F
C
E
F
3. Attach Footboard (B) to the components.
3.1. Please note the indicating letters for homing guidance.
3.2. Please hang the brackets to the Hexagonal bolts (D) and tighten by using Wrench (E)
(see below diagram).
C
B B
Page 2 of 2
1. Lay all components (A, B, C,...) onto clean smooth surface as carpet or cardboard.
Assembly Instructions :
2. Attach Side Rail (C) to the Headboard (A). Please carefully note
2.1. All letters at component that indicates homing destination
as not to misplace components.
2.2. Please hang the brackets to the Hexagonal bolts (D) and tighten by using Wrench (E)
(see below diagram).
A
C
A
C
D
E
C
D
E
Care Instructions :
Hardware may loosen over time. Periodically check to make sure all components are tight.
.
Re-tighten if necessary.
Dust with soft dry cloth.
Avoid abrasive cleaners. If a cleaner is needed, use a mild-cleaner spray and blot with
.
an absorbent cloth.
For indoor use only.
.
.
Page 3 of 3
4. Attach Slats (D) to the whole body. Use the wood stopper to guide.
ASSEMBLY IS COMPLETED
C
D
STOPPER
FOR SLAT
Care Instructions :
Hardware may loosen over time.
.
Re-tighten if necessary.
Dust with soft dry cloth.
Avoid abrasive cleaners.
.
an absorbent cloth.
For indoor use only.
.
.
Periodically check
to make sure all components are tight.
If a cleaner is needed,
use a mild-cleaner spray and blot with
-
1
-
2
-
3
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
ROOMS TO GO 34128024 Assembly Instructions
-
Better Homes and Gardens BH18-084-097-26 Assembly Instructions Manual
-
aspenhome I349BRGRP1 Assembly Instructions
-
Dorel Asia WM1646RWN Owner's manual
-
-
Delta Children Solutions Toddler Daybed Assembly Instructions
-
Big Lots 810224256 Assembly Instructions Manual
-
BDI LINQ 9129 User manual
-
-
