KARPENTER Wooden queen-size bed Installation guide

Brand
KARPENTER
Model
Wooden queen-size bed
Type
Installation guide
A - Headboard - 1 pc
Please read all instructions before beginning assembly
C - Side Rail - 2 pcs
Pre Assembly :
.
.
on each part and check with below part list to ensure we have all components.
Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts
.
or hardware.
This cart requires one people to do assembly.
.
BED
Parts Included :
B - Footboard - 1 pc
E - Extra Leg - 1 pc
ASSEMBLING INSTRUCTION
Page 1 of 3
A
B C
D
E
Hardware Enclosed :
A - Headboard - 1 pc
Please read all instructions before beginning assembly
Pre Assembly :
.
.
on each part and check with below part list to ensure we have all components.
Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts
.
or hardware.
This cart requires one people to do assembly.
.
BED
Parts Included :
B - Footboard - 1 pc
ASSEMBLING INSTRUCTION
Page 1 of 3
A
B C
D
E
A - Bed - 1 set
Please read all instructions before beginning assembly
Pre Assembly :
.
Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts
.
or hardware.
This cart requires one people to do assembly.
.
BED
Parts Included :
B - Extention Leg
ASSEMBLING INSTRUCTION
Page 1 of 1
Assembly Instructions:
Fix The Extention Leg (B) to the Leg of Bed (A)
.
Secured by Wood Screw. Tighten by using Screw Driver (not include)
.the bigger Extention Leg fix to the Center Leg of Bed
.
Bigger - 1 pc Smaller - 4 pcs
C - Wood Screw - 10 pcs
A - Headboard - 1 pc
Please read all instructions before beginning assembly
C - Side Rail - 2 pcs
Pre Assembly :
.
Place all parts on a carpet or foam in shipping box. Find the letter (A,B,C,...)
.
on each part and check with below part list to ensure we have all components.
Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts
.
or hardware.
This cart requires one people to do assembly.
.
BED
Parts Included :
B - Footboard - 1 pc
D - Slats - 1 set
ASSEMBLING INSTRUCTION
Page 1 of 3
A
B C
D
E - Hexagonal bolts - 8 pcs F - Wrench - 1 pc
Hardware Enclosed :
D - Center Rail - 1 pc
C - Side Rail - 2 pcs E - Extra Leg - 1 pc
F - Head Cap Screw - 8 pcs G - Allen Key - 1 pc
Hardware Enclosed :
D - Center Rail - 1 pc
Place all parts on a carpet or foam in shipping box. Find the letter (A,B,C,...)Place all parts on a carpet or foam in shipping box. Find the letter (A,B,C,...)
A - Headboard - 1 pc
Please read all instructions before beginning assembly
C - Side Rail - 2 pcs
Pre Assembly :
.
Place all parts on a carpet or foam in shipping box. Find the letter (A,B,C,...)
.
on each part and check with below part list to ensure we have all components.
Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts
.
or hardware.
This cart requires one people to do assembly.
.
BED
Parts Included :
B - Footboard - 1 pc
ASSEMBLING INSTRUCTION
Page 1 of 2
A
B C
E - Hexagonal bolts - 8 pcs F - Wrench - 1 pc
Hardware Enclosed :
F - Hexagonal bolts - 8 pcs G - Wrench - 1 pc
Page 2 of 3
1. Lay all components (A, B, C,...) onto clean smooth surface as carpet or cardboard.
Assembly Instructions :
2. Attach Side Rail (C) to the Headboard (A). Please carefully note
2.1. All letters at component that indicates homing destination
as not to misplace components.
2.2. Please hang the brackets to the Hexagonal bolts (F) and tighten by using Wrench (G)
(see below diagram).
3. Attach Footboard (B) to the components.
3.1. Please note the indicating letters for homing guidance.
3.2. Please hang the brackets to the Hexagonal bolts (F) and tighten by using Wrench (G)
(see below diagram).
Page 2 of 3
1. Lay all components (A, B, C,...) onto clean smooth surface as carpet or cardboard.
Assembly Instructions :
2. Attach Side Rail (C) to the Headboard (A). Please carefully note
2.1. All letters at component that indicates homing destination
as not to misplace components.
2.2. Please hang the brackets to the Hexagonal bolts (E) and tighten by using Wrench (F)
(see below diagram).
3. Attach Footboard (B) to the components.
3.1. Please note the indicating letters for homing guidance.
3.2. Please hang the brackets to the Hexagonal bolts (E) and tighten by using Wrench (F)
(see below diagram).
Care Instructions :
Hardware may loosen over time. Periodically check to make sure all components are tight.
.
Re-tighten if necessary.
Dust with soft dry cloth.
Avoid abrasive cleaners. If a cleaner is needed, use a mild-cleaner spray and blot with
.
an absorbent cloth.
For indoor use only.
.
.
Page 2 of 2
1. Lay all components (A, B, C,...) onto clean smooth surface as carpet or cardboard.
2. Attach Side Rail (C) to the Headboard (A). Please carefully note
2.1. All letter at component that indicates homing destination
as not to misplace components.
2.2. Please hang the brackets to the Hexagonal bolts (E) and tighten by using Wrench (F)
(see below diagram).
ASSEMBLY IS COMPLETED
C
AA
C
F
E
B
C
F
E
C
B
A
C
A
C
F
E
F
E
C
A
A
C
A
C
G
F
B
C
C
B
G
F
Page 3 of 3
4. Attach Extra Leg (E) to the Center Rail (D). See diagram below
5. Attach Center Rail (D) with Extra Leg (E) to bed. Please DO NOT attach Center Rail (D) without
first securing Extra Leg (E) to the whole body otherwise Center Rail (D) might break.
E
D
E
D
D
A
D
B
Care Instructions :
Hardware may loosen over time. Periodically check to make sure all components are tight.
.
Re-tighten if necessary.
Dust with soft dry cloth.
Avoid abrasive cleaners. If a cleaner is needed, use a mild-cleaner spray and blot with
.
an absorbent cloth.
For indoor use only.
.
.
ASSEMBLY IS COMPLETED
Page 3 of 3
3. Attach Footboard (B) to the components.
3.1. Please note the indicating letters for homing guidance.
3.2. Please hang the brackets to the Hexagonal bolts (E) and tighten by using Wrench (F)
(see below diagram).
4. Attach Slats (D) to the whole body. Use the wood stopper to guide.
ASSEMBLY IS COMPLETED
Care Instructions :
Hardware may loosen over time. Periodically check to make sure all components are tight.
.
Re-tighten if necessary.
Dust with soft dry cloth.
Avoid abrasive cleaners. If a cleaner is needed, use a mild-cleaner spray and blot with
.
an absorbent cloth.
For indoor use only.
.
.
B
C
C
B
F
E
C
D
STOPPER
FOR SLAT
  • Page 1 1
  • Page 2 2
  • Page 3 3

KARPENTER Wooden queen-size bed Installation guide

Brand
KARPENTER
Model
Wooden queen-size bed
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents