H3C MSR 30-20 Installation guide

H3C MSR 30 Series Routers

Installation Manual

(v1.00)

MSR 30-11

MSR 30-16

MSR 30-20

MSR 30-40

MSR 30-60

BOM: 3104A10T

www.3Com.com

Part Number: 10016320 Rev. AA

August 2007

3Com Corporation

350 Campus Drive

Marlborough, MA

USA 01752-3064

by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written

permission from 3Com Corporation.

3Com Corporation reserves the right to revise this documentation and to make changes in content from time to time

without obligation on the part of 3Com Corporation to provide notification of such revision or change.

3Com Corporation provides this documentation without warranty, term, or condition of any kind, either implied or

expressed, including, but not limited to, the implied warranties, terms or conditions of merchantability, satisfactory quality,

and fitness for a particular purpose. 3Com may make improvements or changes in the product(s) and/or the program(s)

described in this documentation at any time.

If there is any software on removable media described in this documentation, it is furnished under a license agreement

included with the product as a separate document, in the hard copy documentation, or on the removable media in a

directory file named LICENSE.TXT or !LICENSE.TXT. If you are unable to locate a copy, please contact 3Com and a copy will

be provided to you.

UNITED STATES GOVERNMENT LEGEND

If you are a United States government agency, then this documentation and the software described herein are provided to

you subject to the following:

All technical data and computer software are commercial in nature and developed solely at private expense. Software is

delivered as “Commercial Computer Software” as defined in DFARS 252.227-7014 (June 1995) or as a “commercial item”

as defined in FAR 2.101(a) and as such is provided with only such rights as are provided in 3Com’s standard commercial

license for the Software. Technical data is provided with limited rights only as provided in DFAR 252.227-7015 (Nov 1995) or

FAR 52.227-14 (June 1987), whichever is applicable. You agree not to remove or deface any portion of any legend provided

on any licensed program or documentation contained in, or delivered to you in conjunction with, this User Guide.

Unless otherwise indicated, 3Com registered trademarks are registered in the United States and may or may not be

registered in other countries.

3Com and the 3Com logo are registered trademarks of 3Com Corporation.

H3C, , Aolynk, , H3Care, , TOP G, , IRF, NetPilot, Neocean, NeoVTL, SecPro,

SecPoint, SecEngine, SecPath, Comware, Secware, Storware, NQA, VVG, V2G, VnG, PSPT, XGbus, N-Bus, TiGem, InnoVision

and HUASAN are trademarks of Hangzhou H3C Technologies Co., Ltd., a 3Com company.

All other trademarks that may be mentioned in this manual are the property of their respective owners.

ENVIRONMENTAL STATEMENT

It is the policy of 3Com Corporation to be environmentally-friendly in all operations. To uphold our policy, we are committed

to:

Establishing environmental performance standards that comply with national legislation and regulations.

Conserving energy, materials and natural resources in all operations.

Reducing the waste generated by all operations. Ensuring that all waste conforms to recognized environmental standards.

Maximizing the recyclable and reusable content of all products.

Ensuring that all products can be recycled, reused and disposed of safely.

Ensuring that all products are labelled according to recognized environmental standards.

Improving our environmental record on a continual basis.

End of Life Statement

3Com processes allow for the recovery, reclamation and safe disposal of all end-of-life electronic components.

Regulated Materials Statement

3Com products do not contain any hazardous or ozone-depleting material.

Environmental Statement about the Documentation

The documentation for this product is printed on paper that comes from sustainable, managed forests; it is fully

biodegradable and recyclable, and is completely chlorine-free. The varnish is environmentally-friendly, and the inks are

vegetable-based with a low heavy-metal content.

GET THE LATEST DOCUMENTATION

AND SOFTWARE FOR YOUR

H3C ROUTER

Thank you for purchasing an H3C MSR 30 Series router. As part of our

commitment to help you get the most out of your H3C network equipment, we

offer updated documentation and software on our website.

n

In addition to this Installation Guide, a detailed User Guide, Configuration Guide,

and a Command Reference Guide are also available on the 3Com website.

To obtain the most up-to-date user documentation and operating software for the

MSR 30 Series router, point your web browser to: www.3Com.com and select

the “Support and Registration” link.

Please note that you must register your router to receive software upgrades. To

register, point your web browser to eSupport.3Com.com.

Español Una versión en español de esta guía se encuentra disponible en nuestra página

Web. Visite www.3Com.com, seleccione “Support and Registration” y presione el

vínculo “Software Downloads”.

Português Para obter a versão em português deste guia, visite nosso site www.3Com.com,

selecione “Support and Registration” e clique no link “Software Downloads”.

4 GET THE LATEST DOCUMENTATION AND SOFTWARE FOR YOUR H3C ROUTER

CONTENTS

GET THE LATEST DOCUMENTATION AND SOFTWARE FOR YOUR

H3C R

OUTER

ABOUT THIS GUIDE

Conventions 7

Related Documentation 8

1 OVERVIEW

Introduction 9

System Description 9

Generic Modules 21

2 INSTALLATION PREPARATIONS

Requirements on Environment 23

Safety Precautions 25

Installation Tools, Meters and Equipment 25

3 INSTALLATION

Installation Process 27

Installing Cabinets 28

Installing the Router 28

Installing Generic Modules 29

Connecting the PGND 30

Connecting the Power Cord 30

Connecting the Console Terminal 34

Fixed Interfaces 35

Interface Card Module 38

Slide Rail Installation on MSR 30-11 and Removal 38

Slide Rail Installation on MSR 30-16/30-20 and Removal 40

Slide Rail Installation on MSR 30-40/30-60 and Removal 41

Verifying Installation 43

4 STARTUP AND CONFIGURATION

Startup 45

Configuration Fundamentals 50

5 SOFTWARE MAINTENANCE

Introduction 55

BootROM Menu 58

Upgrading BootROM Through Serial Port 62

Upgrading Application Program Through Serial Port 65

Upgrading Application Program Through Ethernet Interface 66

Maintaining Application Program and Configurations Through Command Lines 69

Maintaining Application Program and Configuration File 74

Dealing with Router Password Loss 76

Backing up and Restoring BootROM 77

6 HARDWARE MAINTENANCE

Preparing Tools 79

Opening/Closing the Chassis Cover 79

Internal Structure of the Router 82

Removing/Installing a Power Module 85

Installing/Removing a CF Card 87

Replacing a Memory Module 88

Replacing a VPM 92

Installing/Removing an ESM/VCPM Card 93

7 TROUBLESHOOTING

Troubleshooting the Power System 95

Troubleshooting the Configuration System 95

Troubleshooting Application Image Upgrade 96

ABOUT THIS GUIDE

This guide describes the H3C MSR 30 Series Routers and how to install hardware,

configure and boot software, and maintain software and hardware. This guide

also provides troubleshooting and support information for your router.

This guide is intended for qualified service personnel who are responsible for

configuring, using, and managing the routers. It assumes a working knowledge of

local area network (LAN) operations and familiarity with communication protocols

that are used to interconnect LANs.

n

Always download the release notes for your product from the 3Com World Wide

Web site and check for the latest updates to software and product

documentation: http://www.3Com.com

Conventions Table 1 lists icon conventions that are used throughout this guide.

Table 2 lists text conventions that are used throughout this guide.

Table 1 Notice Icons

Icon Notice Type Description

n

Information note Information that describes important features or

instructions.

c

Caution Information that alerts you to potential loss of data

or potential damage to an application, system, or

device.

w

Warning Information that alerts you to potential personal

injury.

Table 2 Text Conventions

Convention Description

Screen displays This typeface represents information as it appears on the

screen.

Keyboard key names If you must press two or more keys simultaneously, the key

names are linked with a plus sign (+), for example:

Press Ctrl+Alt+Del

The words “enter” and “type” When you see the word “enter” in this guide, you must type

something, and then press Return or Enter. Do not press

Return or Enter when an instruction simply says “type.”

8 ABOUT THIS GUIDE

The following manuals offer additional information necessary for managing your

MSR 30 Series router:

■ H3C MSR 20/30/50 Series Routers Configuration Guide — Describes how to

operate the router. It includes sections about getting started, system

management, interface, link layer protocol, network protocol, routing protocol,

multicast protocol, security, VPN, reliability, QoS, dial-up and VoIP, as well as

acronyms used in the manual.

■ H3C MSR 20/30/50 Series Routers Command Reference Guide — Provides a

detailed description of the operating commands. It includes sections about

getting started, system management, interface, link layer protocol, network

protocol, routing protocol, multicast protocol, security, VPN, reliability, QoS,

dial-up and VoIP, as well as a command index.

■ H3C MSR 20/30/50 Series Routers Interface Card and Interface Module

Manual — Covers the pinouts, function, interface attributes, panels, and LEDs

of all interface cards and modules available with the router.

■ LMR Series Routers Cable Manual — Describes the pinouts of the cables

available for LMR series routers.

■ Release Notes — Contains the latest information about your product. If

information in this guide differs from information in the release notes, use the

information in the Release Notes.

These documents are available in Adobe Acrobat Reader Portable Document

Format (PDF) on the CD-ROM that accompanies your router or on the 3Com

World Wide Web site: http://www.3Com.com

Words in italics Italics are used to:

Emphasize a point.

Denote a new term at the place where it is defined in the

text.

Identify menu names, menu commands, and software

button names.

Examples:

From the Help menu, select Contents.

Click OK.

Words in bold Boldface type is used to highlight command names. For

example, “Use the display user-interface command

to...”

Tabl e 2 Text Conventions

Convention Description

1

OVERVIEW

Introduction H3C MSR 30 Series Routers were self-developed by Hangzhou H3C Technologies

Co., Ltd. for use on enterprise-level networks. Depending on the network size,

MSR 30 Series Routers can be either core routers on small and medium enterprise

networks, or access routers for network branches on some large-sized enterprise

networks. Therefore, H3C MSR 30 Series Routers are suitable for the application

on the carrier-level networks, such as telecom management networks and billing

networks. MSR 30 Series Routers adopt modular design and support a wide range

of optional smart interface cards (SICs) and multi-function interface modules

(MIMs). Currently, the MSR 30-11 can adopt AC only, the MSR 30-16 can adopt

AC and PoE, and the MSR 30-20, 30-40 and 30-60 can adopt AC, DC, and PoE.

Except the MSR 30-11 and the AC-powered MSR 30-16, the MSR 30 series routers

each provide a redundancy power system (RPS) interface to enhance the routers’

reliability. The PoE-powered routers can remotely supply power to its powered

devices (PDs).

H3C MSR 30 series include these models:

■ MSR 30-11

■ MSR 30-16

■ MSR 30-20

■ MSR 30-40

■ MSR 30-60

System Description

Fixed Interfaces

Table 1 Fixed interfaces of the H3C MSR 30 series routers

Item MSR 30-11 MSR 30-16 MSR 30-20 MSR 30-40 MSR 30-60

Fixed

interfaces

Console 1 1 1 1 1

AUX 1 1 1 1 1

USB 0 1 2 2 2

FE 2 2 0 0 0

GE 0 0 Two

electrical

interfaces

Two Combo

interfaces

Two Combo

interfaces

SA 1 0 0 0 0

10 CHAPTER 1: OVERVIEW

n

The console interface and AUX interface of the MSR 30-11 are integrated.

Interface Cards

n

The height of MIM cards may be one U (44.45 mm or 1.75 in.) or half a U. Slot 5

and slot 6 on the MSR 30-20, MSR 30-40, or MSR 30-60 are both half a U high.

The two slots together can accommodate only one 1-U-high MIM card.

Processor and Memory

n

■ Boot ROM stores bootstrap.

■ The memory is used to store the communication data between the system and

the CPU when the system is running.

■ The CF card is used to store the software system and configuration file. The CF

card LED blinks when the system is reading/writing data from/to the CF card. In

this case, do not remove the CF card, otherwise hardware and software

damage may occur.

Other Hardware

Specifications

Tabl e 2 Interface cards of the H3C MSR 30 series routers

Item MSR 30-11 MSR 30-16 MSR 30-20 MSR 30-40 MSR 30-60

External

cards

SIC 2 4 4 4 4

MIM 1 1 2 4 6

XMIM 1 0 0 0 0

Internal

cards

ESM 1 2 2 2 2

VCPM 0 1 1 1 1

VPM 0 2 2 3 3

Tabl e 3 Processor and memory of the H3C MSR 30 series routers

Item MSR 30-11 MSR 30-16 MSR 30-20 MSR 30-40 MSR 30-60

Processor PowerPC PowerPC PowerPC PowerPC PowerPC

Boot ROM 2 MB 4 MB 4 MB 4 MB 4 MB

Memory DDR: 256 MB DDR SDRAM:

Default: 256

MB

Max: 768 MB

DDR SDRAM:

Default: 256

MB

Max: 1 GB

DDR SDRAM:

Default: 256

MB

Max: 1 GB

DDR SDRAM:

Default: 256

MB

Max: 1 GB

CF CARD Not

supported

Default: 256

MB

Max: 1 GB

Default: 256

MB

Max: 1 GB

Default: 256

MB

Max: 1 GB

Default: 256

MB

Max: 1 GB

Tabl e 4 Hardware specifications for the H3C MSR 30 series routers

Item MSR 30-11 MSR 30-16 MSR 30-20 MSR 30-40 MSR 30-60

Dimensions (H

× W × D),

excluding feet

and mounting

ears

44.2 × 442 ×

360 mm (1.74

× 17.4 ×

14.17 in.)

44.2 × 442 ×

441.8 mm

(1.74 × 17.4 ×

17.39 in.)

44.2 × 442 ×

441.8 m (1.74

× 17.4 ×

17.39 in.)

88.2 × 442 ×

422.3 mm

(3.47 × 17.4 ×

16.62 in.)

132 × 442 ×

421.8 mm

(5.20 × 174 ×

16.61 in.)

Weight 4.3 kg (9.5

lb.)

6 kg (13.2 lb.) 6.9 kg (15.2

lb.)

11.9 kg (26.2

lb.)

13.6 kg (30

lb.)

System Description 11

H3C MSR 30-11 Appearance

■ Front panel

Figure 1 Front panel of the H3C MSR 30-11

■ Rear panel

Figure 2 Rear panel of the H3C MSR 30-11

AC input Rated voltage

range: 100

VAC to 240

VAC, 50 Hz or

60 Hz

Rated voltage

range: 100

VAC to 240

VAC, 50 Hz or

60 Hz

Rated voltage

range: 100

VAC to 240

VAC, 50 Hz or

60 Hz

Rated voltage

range: 100

VAC to 240

VAC, 50 Hz or

60 Hz

Rated voltage

range: 100

VAC to 240

VAC, 50 Hz or

60 Hz

DC input Not

supported

Not

supported

Rated voltage

range: -48

VDC to -60

VDC

Rated voltage

range: -48

VDC to -60

VDC

Rated voltage

range: -48

VDC to -60

VDC

PoE input Not

supported

Rated voltage

range: 100

VAC to 240

VAC, 50 Hz or

60 Hz

Rated voltage

range: 100

VAC to 240

VAC, 50 Hz or

60 Hz

Rated voltage

range: 100

VAC to 240

VAC, 50 Hz or

60 Hz

Rated voltage

range: 100

VAC to 240

VAC, 50 Hz or

60 Hz

Operating

temperature

0°C to 40°C

(32°F to

104°F)

0°C to 40°C

(32°F to

104°F)

0°C to 40°C

(32°F to

104°F)

0°C to 40°C

(32°F to

104°F)

0°C to 40°C

(32°F to

104

°F)

Relative

humidity

(non-conducti

ng)

5% to 90% 5% to 90% 5% to 90% 5% to 90% 5% to 90%

Table 4 Hardware specifications for the H3C MSR 30 series routers

Item MSR 30-11 MSR 30-16 MSR 30-20 MSR 30-40 MSR 30-60

(1) Power LED (PWR) (2) System LED (SYS)

(3) ESM LED (4) Power switch

(5) Power receptacle

(1) Grounding terminal (2) FE interface 1

(3) FE interface 0 (4) Console/AUX interface

(1)(2)(3)

(4)

(5)

(2) (3)(1) (4) (5) (6) (8)(7)

(9)(10)

12 CHAPTER 1: OVERVIEW

Panel LEDs

H3C MSR 30-16 Appearance

1 Front view

Figure 3 Front view of H3C MSR 30-16

2 Rear view

(5) Serial interface (6) Serial interface status LEDs

(7) MIM/XMIM slot (8) Removable slide rails

(9) SIC slot 1 (10) SIC slot 2

Tabl e 5 LEDs on the front panel of the H3C MSR 30-11

LED Description

PWR ON: The power supply of the system works normally.

OFF: The power supply of the system is disconnected.

SYS Blinking: The system runs normally.

ON or OFF: The system runs abnormally.

ESM OFF: No ESM is in position.

Solid green: An ESM is in position and works normally.

Blinking green: The ESM is processing data.

Solid yellow: An ESM is in position but is faulty.

Tabl e 6 LEDs on the rear panel of the H3C MSR 30-11

LED DEscription

LINK OFF: No link is present.

ON: A link is present.

ACT OFF: No data is being received or sent.

Blinking: Data is being received or sent.

(1) Power LED (POWER) (2) System LED (SYSTEM)

(3) Console port (CONSOLE) (4) Auxiliary port (AUX)

(5) USB interface (6) CF card

(7) CF card LED (8) Power receptacle

(9) Power switch

(1)

(2)

(3)

(4)(5)(6)(7) (8)(9)

System Description 13

Figure 4 Rear view of H3C MSR 30-16

Panel LEDs

(1) FE interface 0 (2) FE interface 1

(3) ESM1 LED (4) ESM0 LED

(5) VPM1 LED (6) VPM0 LED

(7) VCPM LED (8) Grounding terminal

(9) SIC slot 1 (10) SIC slot 2

(11) SIC slot 3 (12) SIC slot 4

(13) MIM slot 5

Table 7 Front panel LEDs description of H3C MSR 30-16 router

LED Description

PWR ON means: the system provides power for cards normally.

OFF means the system does not supply power for cards.

SYS Blinking means the system is operating normally.

Steady ON or steady OFF means the system does not operate

normally.

USB0 OFF means the USB interface has not been connected to a

host.

Steady green means the USB interface is connected to a host

and the host can be removed.

Blinking green means data is being transferred to/from the

host and the host cannot be removed now.

CF CF card LED:

Steady green means the CF card is in place and can be

identified by the router.

Blinking green means the CF card is being accessed and must

not be removed.

Steady yellow means the CF card is in place but cannot be

identified by the router.

OFF means no CF card is inserted or the CF card cannot be

identified.

Table 8 Rear panel LEDs of H3C MSR 30-16 Router

LED Description

LINK OFF means no link is present.

ON means a link connection is established.

(1)

(3)(4)

(2)(5)(6)(8)

(7)

(9)(10)

(11)(12)

(13)

14 CHAPTER 1: OVERVIEW

H3C MSR 30-20 Router Appearance

1 Front view

Figure 5 Front view of H3C MSR 30-20

2 Rear view

ACT OFF means no data is being received or sent.

ON means data is being received or sent.

ESM0 to 1 OFF means no ESM is in the ESM slot.

Solid green means an ESM is in the ESM slot and operates

normally.

Blinking green means the ESM is processing data.

Solid yellow means an ESM is in the ESM slot but does not

operate normally.

VCPM OFF means VCPM is not in the slot.

Steady green means a VCPM is in the slot and operates

normally.

Steady yellow means a VCPM is in the slot but does not

operate normally.

VPM0 to 1 OFF means no VPM is in the VPMx slot.

Steady green means a VPM is in the VPMx slot and operates

normally.

Steady yellow means a VPM is in the VPMx slot but does not

operate normally.

Tabl e 8 Rear panel LEDs of H3C MSR 30-16 Router

LED Description

(1) Power LED (PWR) (2) System LED (SYS)

(3) USB LED (4) Console port (CONSOLE)

(5) Auxiliary port (AUX) (6) USB interface 0

(7) USB interface 1 (8) CF card LED

(9) CF card (10) Power receptacle

(11) Power switch

(2)(1)

(3)

(7) (4)

(8) (9) (6) (5) (11) (10)

System Description 15

Figure 6 Rear view of H3C MSR 30-20

Panel LEDs

(1) GE interface 0 (2) GE interface 1

(3) SIC slot 1 (4) SIC slot 2

(5) SIC slot 3 (6) SIC slot 4

(7) MIM slot 5 (8) MIM slot 6

(9) Grounding terminal (10) VCPM LED

(11) VPM1 LED (12) VPM0 LED

(13) ESM0 LED (14) ESM1 LED

Table 9 Front panel LEDs description of H3C MSR 30-20 router

LED Description

PWR Power LED:

ON means the system provides power for cards normally.

OFF means the system does not supply power for cards.

SYS Hardware system operation LED:

Blinking means the system is operating normally.

Steady ON or steady OFF means the system does not operate

normally.

USB0 OFF means the USB interface has not been connected to a host.

Steady green means the USB interface is connected to a host and

the host can be removed.

Blinking green means data is being transferred to/from the host

and the host cannot be removed now.

CF CF card LED:

Steady green means the CF card is in the slot and can be

identified by the router.

Blinking green means the CF card is being accessed and cannot

be removed.

Steady yellow means the CF card is in the slot but cannot be

identified by the router.

OFF means no CF card is inserted or the CF card cannot be

identified.

(1)

(2) (6)

(4) (3)

(5)

(7)

(8)

(12)(11)(10)

(13)(14)(9)

16 CHAPTER 1: OVERVIEW

H3C MSR 30-40 Router Appearance

1 Front view

Figure 7 Front view of H3C MSR 30-40

Table 10 Rear panel LEDs of H3C MSR 30-20 Router

LED Description

GE LED OFF means no link is present.

Steady green means a 1000 Mbps connection has been

established.

Blinking green means data is being received or transmitted at a

speed of 1000 Mbps.

Steady yellow means a 10/100 Mbps connection has been

established.

Blinking yellow means data is being received and transmitted at a

speed of 10/100 Mbps.

ESM0 to 1 OFF means no ESM is in the ESM slot.

Steady green means an ESM is in the ESM slot and operates

normally.

Blinking green means the ESM is processing data.

Steady yellow means an ESM is in the ESM slot but does not

operate normally.

VCPM OFF means no VCPM is in the slot.

Steady green means a VCPM is in the slot and operates normally.

Steady yellow means a VCPM is in the slot but does not operate

normally.

VPM0 to 1 OFF means no VPM is in the VPMx slot.

Steady green means a VPM is in the VPM slot and operates

normally.

Steady yellow means a VPM is in the VPM slot but does not

operate normally.

(1) Power LED (PWR) (2) System LED (SYS)

(3) USB LED (4) Console port (CONSOLE)

(5) Auxiliary port (AUX) (6) USB interface 0

(7) USB interface 1 (8) CF card LED

(9) CF card (10) Power receptacle

(11) Power switch

(2) (3)

(10)

(8)

(9)

(6) (5)

(7) (4) (1)

(11)

System Description 17

2 Rear view

Figure 8 Rear view of H3C MSR 30-40

Panel LEDs

(1) VCPM LED (2) VCPM0 LED

(3) VPM1 LED (4) VPM2 LED

(5) SFP0 LED (6) SFP1 LED

(7) ESM0 LED (8) ESM1 LED

(9) GE0 port (10) GE1 port

(11) SFP0 port (12) SFP1 port

(13) SIC slot 1 (14) SIC slot 2

(15) SIC slot 3 (16) SIC slot 4

(17) MIM slot 5 (18) MIM slot 6

(19) MIM slot 7 (20) MIM slot 8

(21) Grounding terminal

Table 11 Front panel LEDs description of H3C MSR 30-40 router

LED Description

PWR Power LED:

ON means the system provides power for cards normally.

OFF means the system does not supply power for cards.

SYS Hardware system operation LED

Blinking means the system is operating normally.

Steady ON or steady OFF means the system does not operate

normally.

USB0 OFF means the USB interface is not connected to a host;

Steady green means the USB interface has been connected to a

host and the host can be removed.

Blinking green means data is being transferred to/from the host

and the host cannot be removed now.

(9)

(4) (8)

(3) (7)

(2) (6)

(1) (5)

(11)

(10)(12)

(14) (13)(16) (17)(15) (18)

(19)

(20)(21)

18 CHAPTER 1: OVERVIEW

CF CF card LED

Steady green means the CF card is in the slot and can be

identified by the router.

Blinking green means the CF card is being accessed and cannot

be removed.

Steady yellow means the CF card is in the slot but cannot be

identified by the router.

OFF means no CF card is inserted or the CF card cannot be

identified.

Table 12 Rear panel LEDs of H3C MSR 30-40 Router

LED Description

GE LED OFF means no link is present.

Steady green means a 1000 Mbps connection has been

established.

Blinking green means data is being received or transmitted at a

speed of 1000 Mbps.

Steady yellow means a 10/100 Mbps connection has been

established.

Blinking yellow means data is being transmitted at a speed of

10/100 Mbps.

SFP0 to 1 OFF means no SFP connection is established.

Steady green means SFP connection has been established.

Blinking green means SFP is receiving or transmitting data.

Steady yellow means SFP cannot be identified by the router.

ESM0 to 1 OFF means no ESM is in the ESM slot.

Steady green means an ESM is in the ESM slot and operates

normally.

Blinking green means the ESM is processing data.

Solid yellow means an ESM is in the ESM slot but does not

operate normally.

VCPM OFF means no VCPM is in the slot.

Steady green means a VCPM is in the slot and operates normally.

Steady yellow means a VCPM is in the slot but does not operate

normally.

VPM0 to 2 OFF means no VPM is in the VPMx slot.

Steady green means a VPM is in the VPMx slot and operates

normally.

Steady yellow means a VPM is in the VPMx slot but does not

operate normally.

Table 11 Front panel LEDs description of H3C MSR 30-40 router

LED Description

System Description 19

H3C MSR 30-60 Router Appearance

1 Front view

Figure 9 Front view of H3C MSR 30-60

2 Rear view

Figure 10 Rear view of H3C MSR 30-60

(1) Power LED (PWR) (2) System LED (SYS)

(3) USB LED (4) Console port (CON)

(5) Auxiliary port (AUX) (6) USB interface 0

(7) USB interface 1 (8) CF card LED

(9) CF card (10) Power receptacle

(11) Power switch

(3) (2)

(1)(4)

(5)(6)

(7)

(10)(8) (9) (11)

(1) VCPM LED (2) VPM0 LED

(3) VPM1 LED (4) VPM2 LED

(5) SFP0 LED (6) SFP1 LED

(7) ESM0 LED (8) ESM1 LED

(9) GE0 port (10) GE1 port

(9)(4) (8)

(3) (7)

(2) (6)

(1) (5)

(11)

(10)(12)

(14) (17)(15) (18)

(22)

(20)

(23)

(16)

(13)

(21)

(19)

20 CHAPTER 1: OVERVIEW

Panel LEDs

(11) SFP0 port (12) SFP1 port

(13) SIC slot 1 (14) SIC slot 2

(15) SIC slot 3 (16) SIC slot 4

(17) MIM slot 5 (18) MIM slot 6

(19) MIM slot 7 (20) MIM slot 8

(21) MIM slot 9 (22) MIM slot 10

(23) Grounding terminal

Table 13 Front panel LEDs description of H3C MSR 30-60 router

LED Description

PWR Power LED:

ON means the system provides power for cards normally.

OFF means the system does not supply power for cards.

SYS Hardware system operation LED:

Blinking means the system is operating normally.

Steady ON or steady OFF means the system does not operate

normally.

USB0 OFF means the USB interface has not been connected to a host.

Steady green means the USB interface has been connected to a host

and the host can be removed.

Blinking green means data is being transferred to/from the host and

the host cannot be removed now.

CF CF card LED:

Steady green means the CF card is in the slot and can be identified

by the router.

Blinking green means the CF card is being accessed and cannot be

removed.

Steady yellow means the CF card is in the slot but cannot be

identified by the router.

OFF means no CF card is inserted or the CF card cannot be

identified.

Table 14 Rear panel LEDs of H3C MSR 30-60 Router

LED Description

GE LED OFF means no link is present.

Steady green means a 1000 Mbps connection has been established.

Blinking green means data is being received or transmitted at a

speed of 1000 Mbps.

Steady yellow means a 10/100 Mbps connection has been

established.

Blinking yellow means data is being transmitted and received at a

speed of 10/100 Mbps.

SFP0 to 1 OFF means no SFP connection is established.

Steady green means SFP connection has been established.

Blinking green means SFP is receiving or transmitting data.

Steady yellow means SFP cannot be identified by the router.

Page is loading ...

H3C MSR 30-20 Installation guide

This manual is also suitable for

H3C MSR 30-20 Installation guide

Related papers

Other documents