Page is loading ...
1
Please read the manual fully before using the appliance and keep the
manual safe for future reference.
Floor Lamp
2
Before assembling the appliance please remove any packaging and material.
Assembling the appliance
Remove all the parts of the appliance from its packaging.
Remove all the lamp parts.
Remove the black brushing that surrounds the wires in the base.
Take the Flex pole and thread the power cord through the lower pole.
Twist the lower pole clockwise so that it ts into the ex pole (ensure you do
not pinch the wire) (illustraon 1).
Insert the ex pole and the lower pole into
the base.
Check the direcon of the lamp and the
hole on the base. Then use a screw to ght-
en the screw into the hole.
Flex pole
Lower pole
Power cord
Lock connectors
Base
3
Light bulb insllaon
1. Insert the bulb into the clips on the lamp head.
2. Push one side of the bulb against one clip, then push the second clip gently
into the slot to insert the other side of the bulb.
Cauon:
Do not push the glass tube forcefully as this could cause the glass to shaer
and cause injury to the user.
3. Push the bulb into the socket, once it is correctly inserted you will hear a
clicking sound.
4. Insert the plug into the electrical outlet and turn on.
Warning
Do not use the appliance near ammable or combusble material
Always keep the lamp 20cm away from walls and other objects
UK and EU Guarantee
Your new Andrew James product comes with a 24 month guarantee and a 2 year
xed warranty, eecve from receipt conrmaon. Your receipt or order number is
required as proof of purchase date so it is imperave that you keep it safe. This
guarantee only applies if the item has been used solely for the use intended, and all
instrucons have been followed accordingly. Please note this product is only for
domesc use only and is not for commercial use.
Abuse of your product will invalidate the guarantee. Returned goods can only be
accepted if repackaged properly within the original colour product box, and
presented with the original receipt of sale/order number. This does not aect your
statutory rights.
Returned products must be cleaned and returned to us in as close to delivery
condion as possible.
If your product develops a problem within the rst 12 months of the xed warranty,
we will pay all shipping costs to have it returned to us. Aer 12 months the
4
customer will be liable for the cost of returning the product to us. We will then pay
to have the repaired/replaced item shipped back to the customer.
If you wish to return your item for a full refund, you have the right to do so within
the rst 7 days. For our returns policy please go to
www.andrewjamesworldwide.com
Customers are responsible for any taxes applied to our products when they are
shipped outside of the EU. All of our prices are inclusive of VAT.
Once a product has been returned to us, we will aim to repair or replace it within 30
days of receipt.
The guarantee does not cover any defect arising from improper use, damage, build-
up of lime scale or repair aempts made by third-pares. Also, the guarantee does
not cover normal wear and tear of individual parts.
Electrical informaon
Please note:
It is extremely important that the wires or cores in the ex are connected to the
correct terminals in the plug. If the colour of the mains lead of the appliance does
not correspond with the coloured markings idenfying the terminals in your plug
proceed as follows:
The Live (Brown) wire
connects to the right-
most live (L) terminal
nearest to the fuse.
The Neutral (Blue) wire
connects to the le-
most neutral (N)
terminal.
The Earth (Green and
Yellow) wire connects
to the central, top most
earthed (E) terminal.
5
Warning:
If the appliance is double insulated indicated by the double insulated symbol:
it should not have an earth wire or earth connecon.
Plug
The plug must be protected by the correct AMP fuse; this will be indicated on the
case of the plug. Only BSI or ASTA approved fuses should be used. When changing
the fuse always replace it with a fuse that is of the same idencal rang as the
original. If you are unsure about which plug or fuse to use, always refer to a
qualied electrician.
Please note aer replacing the fuse, ensure that the cover is correctly ed back
onto the plug. Never aempt to run the appliance if the plug does not have a cover.
If a moulded plug is ed and has to be removed take great care in disposing of the
plug and severed cable, it must be destroyed to prevent it from engaging into a
socket.
If the supply cord is damaged it must be replaced by a service agent or a similarly
qualied person in order to avoid a hazard.
All of our electrical appliances conform to pre-exisng EC Direcves 2006/95/EC
(Low Voltage Direcve) and 2004/108/EC (EMC Direcves).
For further informaon please visit hp://www.esc.org.uk/industry/product-
safety/product-tesng-screening/kitchen-appliances/
6
Bulb disposal instrucons
The bulb inside this product contains mercury. Although the accidental breakage of
a lamp is most unlikely to cause any health problems, it’s good pracce to minimise
any unnecessary exposure to mercury, as well as risk of cuts from glass fragments.
Revised advice issued by the Health Protecon Agency is to:
Venlate the room
Wipe the area with a damp cloth, place that in the plasc bag and seal it
Scky tape (e.g. duct tape or similar) can be used to pick up small residual piec-
es or powder from so furnishings and then placed in a sealed plasc bag. The plas-
c bag doesn't need to be air ght, but should be reasonably sturdy.
Place it in another, similar bag and seal that one as well (this minimises cuts from
broken glass).
Contact the local authority for advice on where to dispose of broken or intact CFLs
as they should be treated as hazardous waste and should not be disposed of in the
bin. All local councils have an obligaon to make arrangements for the disposal of
household hazardous waste at a civic amenity site or household waste recycling
centre. The Naonal Household Hazardous Waste Forum runs a website with
details of these centres for chemicals, but which also applies to other hazardous
wastes (www.chem-away.org.uk/). Alternavely contact your local council direct.
7
Contact details
Andrew James UK LTD
Unit 1
PC Henderson Premises
Bowburn North Industrial estate
Bowburn
Co Durham
DH6 5NG
Customer service/ Technical support– Telephone 08443358464
Customer service/ Technical email:
customerservices@andrewjamesworldwide.com
Website: www.andrewjamesworldwide.com
Copyright Andrew James
/
