2. EDWARDS
  3. SA-TRIM1 and SA-TRIM2 Trim Kit

EDWARDS SA-TRIM1 and SA-TRIM2 Trim Kit Installation guide

  • Hello! I am an AI chatbot trained to assist you with the EDWARDS SA-TRIM1 and SA-TRIM2 Trim Kit Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
© 2013 UTC Fire & Security. All rights reserved. 1 / 2 P/N 3101562 • REV 02 • REB 28JAN13
SA-TRIM1 and SA-TRIM2 Trim Kit
Installation Sheet
Description
The SA-TRIM1 and SA-TRIM2 trim kits are used to semiflush
mount the cabinet box (see Figure 1). The two models are
described in the table below.
Model
Description
SA
-TRIM1 Trim ring kit for 64 point control panels
SA
-TRIM2
Trim ring kit for 127/254 point and 250/500 point
control panels
Installation
Remove the 1/4-inch knockouts in the cabinet box and then
attach the trim ring kit to the cabinet box as shown in Figure 2
using the hardware provided.
Note: You must attach the trim ring kit before placing the
cabinet box in the wall.
Figure 1: Semiflush mounting the cabinet box
Trim ring
Wall
Cabinet box
Figure 2: Trim kit installation
#6-32 K-nuts
2 / 2 P/N 3101562 • REV 02 • REB 28JAN13
/