EDWARDS SA-TRIM1 and SA-TRIM2 Trim Kit Installation guide

SA-TRIM1 and SA-TRIM2 Trim Kit

Installation Sheet

Description

The SA-TRIM1 and SA-TRIM2 trim kits are used to semiflush

mount the cabinet box (see Figure 1). The two models are

described in the table below.

Model

Description

-TRIM1 Trim ring kit for 64 point control panels

-TRIM2

Trim ring kit for 127/254 point and 250/500 point

control panels

Installation

Remove the 1/4-inch knockouts in the cabinet box and then

attach the trim ring kit to the cabinet box as shown in Figure 2

using the hardware provided.

Note: You must attach the trim ring kit before placing the

cabinet box in the wall.

Figure 1: Semiflush mounting the cabinet box

Trim ring

Wall

Cabinet box

Figure 2: Trim kit installation

#6-32 K-nuts

2 / 2 P/N 3101562 • REV 02 • REB 28JAN13