Allied A2700-B User manual

Type
User manual
A2700-B Monitor
User Manual
Package Contents:
27” Monitor Screen Monitor Stand Monitor Base 1 x HDMI cable
1 x Power cable 1 x Power supply unit
Assembly:
No tools are required!
1) Unpack contents of the box. Place the monitor screen face down on a clean, preferably padded surface,
to prevent scratching.
2) Slide the Monitor Stand into the rear of the monitor. The metal clips on the stand must go under the
plastic tabs on the monitor. The “Push” tab will click into place when correctly inserted. Push this tab to
release the stand if removal is required.
3) Insert the Monitor Base onto the Monitor Stand, and rotate to lock into position. The Monitor Stand
should be at the rear of the Base, facing forwards. Stand the unit up.
4) Plug in HDMI cable (and/or VGA cable, not provided) and Power Supply plug into the respective ports.
IMPORTANT! Keep all protective packaging including
protective foam, screen cover and box in case of the need for
future transport. Your warranty may be affected if the monitor
is not transported in its original packaging.
www.alliedgaming.com.au | suppor[email protected]
Operating Instructions
Regular Button Functions (non-menu)
M Down Arrow Up Arrow E Power
Nil Show Advanced
Monitor Menu
Display Basic
Brightness Menu
16:9 / 4:3 Aspect
Ratio toggle
Power On/Off
Within Basic Brightness Menu
M Down Arrow Up Arrow E Power
Exit Menu Exit Menu Brightness up Brightness down Power On/Off
Within Advanced Monitor Menu
M Down Arrow Up Arrow E Power
Back / Exit Menu Select Option Move up /
Change value up
Move down /
Change value down
Power On/Off
Obtaining 75Hz Refresh Rate
The monitor will automatically display at 65Hz when connected to a PC via HDMI cable. To obtain the
maximum 75Hz refresh rate, follow these steps:
1) Right-click your desktop and select ‘Display Settings’
2) Click Advanced ‘Display Settings’, then ‘Display Adapter Properties’
3) Click the Monitor tab and change Screen refresh rate from 60 Hertz to 75 Hertz. Click OK, then Keep
Changes.
Important Information
Do not open or tamper with any of the screws, seals or sockets on the unit. Doing so will instantly void
warranty.
Maintenance: Use only specialised LCD panel cleaner materials for cleaning the screen. Use a damp cloth
on the frame and base.
Ensure adequate ventilation in the room while operating. Do not use near liquid, food, in dusty or high
humidity environments.
If power supply, power cable or any other items appear or become damaged, do not use and contact Allied
support.
Use with a surge-protected power outlet is highly recommended.
www.alliedgaming.com.au | suppor[email protected]
Buttons: M E
  • Page 1 1
  • Page 2 2

Allied A2700-B User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI