Home Styles 9001-0013 Assembly Instructions

Brand: Home Styles

Model: 9001-0013

Type: Assembly Instructions

This manual is also suitable for

Home Styles 9001-0013 is a modular kitchen cart with a variety of features that make it a versatile addition to any kitchen. With its adjustable shelves, drawers, and doors, it provides ample storage space for cookware, utensils, and other kitchen essentials. The sturdy construction and locking casters ensure stability and mobility, while the sleek design adds a touch of elegance to any kitchen décor.

Hardware List

Part List

Home Styles Customer Service: www.homestyles-furniture.com,

[email protected],

888-680-7460, 877-831-0319

Tool(s) required for assembly: Phillips screwdriver

88 9001 001C

Cuisine Cart

IMPORTANT

Carefully remove all the parts from the carton and

place them individually on a soft cloth to prevent

scratches or other damage.

Carefully and strictly follow these assembly instructions

to ensure a completed product as designed.

Do not use power tools above 8 volts to assemble.

Hex Wrench

1 pc.

Small Hex Wrench

1 pc.

M6x35

Head Cap Bolt (long)

12 pcs. (+1 extra)

M6x30

Head Cap Bolt (middle)

for Top

4 pcs. (+1 extra)

M6x25

Head Cap Bolt

for Side Tower Bar

2 pcs. (+1 extra)

M4x16

Wood Screw

for Caster

16 pcs. (+1 extra)

Adjustable Pin

4 pcs. (+1 extra)

Knob

2 pcs.

M4x20

Machine Screw

4 pcs.

Wood Plug

8 pcs. (+1 extra)

Refer to later page(s) of these

instructions for drawer assembly.

Drawer

1 pc.

Front Rail

1 pc.

Back Stretcher

1 pc.

Shelf

1 pc.

Back Upright

1 pc.

Back Panel

2 pcs.

Base

1 pc.

Brush Chrome Pipe

3 pcs.

Base Rack

1 pc.

Side Tower Bar

1 pc.

Side Rack

1 pc.

Side Rack

1 pc.

Side Panel

1 pc.

Side Panel

1 pc.

M3.5x13

Wood Screw (short)

6 pcs. (+1 extra)

M3.5x25

Wood Screw (long)

8 pcs. (+1 extra)

Pull Handle

1 pc.

Caster

2 Locking

2 Non-Locking

4 pcs.

Door

1 pc.

Door

1 pc.

IMPORTANT

 Use a soft cloth between these parts and the ﬂoor.

 Do not use power tools above 8 volts to assemble.

 Do not tighten all the bolts until each part is properly assembled.

 Keep Hex Wrench in a safe place as the bolts may need to be tightened up in the future.

Figure 1

Figure 2

Head Cap Bolt

Locking Caster

STEP 2

Attach Side Panel (A) to Base (C) with Head Cap Bolts.

(See Figure 2)

Attach Back Upright (D) to Base (C).

Slide Back Panels (E) into place.

Attach Back Stretcher (F) and Front Rail (G) to Side Panel (A) with Head Cap Bolts.

Attach Side Panel (B) to unit with Head Cap Bolts.

Assembly Instructions 2/5

Non-Locking Caster

Locking Caster

Wood Screw for Caster

STEP 1

Attach Casters underneath Base (C)

with Wood Screws for Caster, with

Locking Casters on the front.

(See Figure 1)

Note: The ‘Arrow’ sticker

indicates the front of Base (C).

‘Arrow’ sticker at front

Assembly Instructions 3/5

STEP 3

Attach Side Rack (H) to Side Panel (A)

with Head Cap Bolts.

Slide Brush Chrome Pipes (J) and

Base Rack (K) into Side Rack (H).

Attach Side Rack (I) to Side Panel (A)

with Head Cap Bolts.

STEP 5

Attach Top to unit with

Head Cap Bolts for Top.

Insert Adjustable Pins into

side panels at the desired level.

(See Figure 3)

Place Shelf (M) into position.

Head Cap Bolt for Top

Adjustable Pin

Figure 3

Head Cap Bolt

STEP 4

Attach Side Tower Bar (L) to Side Panel (B)

with Head Cap Bolts for Side Tower Bar.

Head Cap Bolt

for Side Tower Bar

Part List

Assembly Instructions 4/5

STEP 8

Attach Pull Handle with Machine Screws.

P1.

Drawer Front

1 pc.

P2.

Drawer Back

1 pc.

P3.

Drawer Side

1 pc.

P4.

Drawer Side

1 pc.

P5.

Drawer Bottom

1 pc.

STEP 7

Slide Drawer Bottom (P5) into the grooves

of Drawer Sides (P3) and (P4) until it meets

Drawer Front (P1).

Attach Drawer Bottom (P5) to unit with

Wood Screws (short).

Drawer (P)

Roller at back

Bottom

STEP 6

Attach Drawer Front (P1) and Drawer

Back (P2) to Drawer Side (P3) with

Wood Screws (long).

Attach Drawer Side (P4) to unit with

Wood Screws (long).

Assembly Instructions 5/5

Figure 4 Figure 5

Figure 6

STEP 9

Attach Knobs to Doors (N) and (O) with Machine Screws.

(See Figure 4)

Attach Doors (N) and (O) to unit by sliding the door lift hinges into side panel lift hinges.

(See Figure 5)

Slide Drawer (P) into position.

Cover all holes with Wood Plugs.

(See Figure 6)

NEVER

use glass cleaners on

finished furniture. Ammonia

chemically attacks the finish.

allow liquids to remain on furniture.

Absorption causes parts to warp

and split and finishes to delaminate.

NEVER

CARE INSTRUCTIONS

Do not use rubber

based placemats.

PREVENT

DISCOLORING

Do not use commercial

waxes and polishes.

PREVENT

YELLOWING

Do not place hot

objects on surface.

PREVENT

FINISH DAMAGE

Do not write

directly on surface.

PREVENT

MARKING

Do not use power tools

above 8 volts to assemble.

PREVENT

CRACKING

Do not place

in direct sunlight.

PREVENT

FADING

with a soft cloth moistened

in lukewarm soap and water.

Buff with a dry clean cloth.

CLEAN

Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of

purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized

retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled

items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:

www.homestyles-furniture.com/customer-service/replacement-parts

Home Styles Customer Service: www.homestyles-furniture.com,

[email protected],

888-680-7460, 877-831-0319

Home Styles 9001-0013 Assembly Instructions

Brand: Home Styles

Model: 9001-0013

Type: Assembly Instructions

This manual is also suitable for

Download PDF

report

Home Styles 9001-0013 Assembly Instructions

This manual is also suitable for

Home Styles 9001-0013 Assembly Instructions

Other documents