2. Apogee
  3. Digi 001

Apogee Digi 001, Digi 002, Mini-DAC, Rosetta 800 Connection Manual

  • Hello! I am an AI chatbot trained to assist you with the Apogee Digi 001 Connection Manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
ApogeeApogeeConnnects : Rosetta 800 - MiniDAC - Digi 002, 001
Analog Outputs
(p/n DA8-IFC)
Analog Inputs
(p/n AD8-IFC)
Hardware Connections
Analog Outs
(WE-XX-5.0)
Notes
1) The 002’s ADAT I/O supports sample rates up to 48 kHz.
2) In the Pro Tools software, under Hardware Setup, set Clock Source to ADAT.
3) In Pro Tools, select inputs ADAT 1-8 to receive signals from the Rosetta 800’s analog inputs;
select outputs ADAT 1-8 to send signals to the Rosetta’s analog outputs.
4) In Pro Tools, select the S/PDIF output to send signals to the MiniDAC’s analog outputs.
Hardware Settings
Select desired
sample rate
Analog 24-Bit ADAT
S/PDIF CX
S/PDIF
WE-RR-1.0
Optical (Toslink)
Cables
/