CTC Union IGS-402F?4PH24 Quick Installation Manual

Brand: CTC Union

Model: IGS-402F?4PH24

Category: Network switches

Type: Quick Installation Manual

This manual is also suitable for

Quick Installation Guide

sales@ctcu.com

IGS-401F-4PH24, IGS-402F-4PH24, IGS-402S-4PH24

IGS-401F-4PHE24, IGS-402F-4PHE24, IGS-402S-4PHE24

Industrial Grade Gigabit PoE Switches (Hardened)

Version 1.6 April, 2020

2020 CTC Union Technologies Co., LTD.

All trademarks are the property of their respective owners.

Technical information in this document is subject to change without notice.

CTC Union Technologies Co.,Ltd.

Far Eastern Vienna Technology Center

(Neihu Technology Park)

8F, No. 60 Zhouzi St.,

Neihu, Taipei 114, Taiwan

T +886-2-26591021

F +886-2-26590237

E [email protected]m

H www.ctcu.com

Laser part is a

potentially hazardous

situation which, if not

avoided, can result in

death or serious

injury.

CLASS 1

Laser Product

LEGAL

The information in this publication has been carefully checked and is believed to be entirely accurate at

the time of publication. CTC Union Technologies assumes no responsibility, however, for possible errors

or omissions, or for any consequences resulting from the use of the information contained herein. CTC

Union Technologies reserves the right to make changes in its products or product specifications with the

intent to improve function or design at any time and without notice and is not required to update this

documentation to reflect such changes.

CTC Union Technologies makes no warranty, representation, or guarantee regarding the suitability of its

products for any particular purpose, nor does CTC Union assume any liability arising out of the

application or use of any product and specifically disclaims any and all liability, including without

limitation any consequential or incidental damages.

CTC Union products are not designed, intended, or authorized for use in systems or applications

intended to support or sustain life, or for any other application in which the failure of the product could

create a situation where personal injury or death may occur. Should the Buyer purchase or use a CTC

Union product for any such unintended or unauthorized application, the Buyer shall indemnify and hold

CTC Union Technologies and its officers, employees, subsidiaries, affiliates, and distributors harmless

against all claims, costs, damages, expenses, and reasonable attorney fees arising out of, either directly

or indirectly, any claim of personal injury or death that may be associated with such unintended or

unauthorized use, even if such claim alleges that CTC Union Technologies was negligent regarding the

design or manufacture of said product.

WARNING:

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with

the instruction manual may cause harmful interference in which case the user will be required to correct

the interference at his own expense. NOTICE: (1) The changes or modifications not expressively

approved by the party responsible for compliance could void the user's authority to operate the

equipment. (2) Shielded interface cables and AC power cord, if any, must be used in order to comply

with the emission limits.

This is a Class A product. In a domestic environment this product may cause radio interference in which

case the user may be required to take adequate measures.

Table of Contents

Introduction .................................................................................. 5

Package List ................................................................................. 5

Features ........................................................................................ 5

Specifications ............................................................................... 5

ETHERNET INTERFACE............................................................................................ 5

OPTICAL ETHERNET INTERFACE ................................................................................ 6

SWITCH FEATURES ............................................................................................... 6

POWER OVER ETHERNET ........................................................................................ 6

POWER ............................................................................................................. 6

MECHANICAL ...................................................................................................... 7

ENVIRONMENTAL................................................................................................. 7

CERTIFICATIONS .................................................................................................. 7

MTBF (MIL-HDBK-217) .................................................................................... 7

Panels ........................................................................................... 8

LAN & Fiber Ports ........................................................................ 9

PoE Ports ...................................................................................... 9

RJ-45 ETHERNET PORT PINOUTS ............................................................................. 9

RJ-45 ETHERNET & POE PIN ASSIGNMENTS ............................................................... 9

DIP Switch................................................................................... 10

Recommended Power, Alarm, Ground Wiring Scheme ........... 11

DC POWER CONNECTION ..................................................................................... 11

ALARM RELAY CONNECTION .................................................................................. 12

EARTH GROUND CONNECTION ............................................................................... 12

LED Indicators ............................................................................ 13

Installation .................................................................................. 14

Introduction

IGS-401F/402F/402S-4PH24 models are non-managed industrial

grade Gigabit PoE (Power over Ethernet) switches that provide stable

and reliable Ethernet transmission. Housed in rugged DIN rail or wall

mountable enclosures, these switches are designed for harsh

environments, such as industrial networking and intelligent

transportation systems (ITS) and are also suitable for many military and

utility market applications where environmental conditions exceed

commercial product specifications. Standard operating temperature

range models (-10°C~60°C) and wide operating temperature range

models (-40°C~75°C) fulfill the special needs of industrial automation

applications.

Package List

 IGS-401F/402F/402S-4PH(E)24 device

 Protective caps for SFP ports (for IGS-402S-4PH(E)24 device)

 Terminal block

Features

 Redundant dual DC inputs 24/48VDC (20~57VDC)

 DCV 'boost' feature; regulated 52VDC PoE output voltage

 IP30 rugged metal housing

 Wide temperature range -40°C~75°C (IGS-401F-4PHE24, IGS-402F-

4PHE24 & IGS-402S-4PHE24)

 Support Ethernet jumbo frames

 Broadcast storm protection (enable/disable by DIP)

 Heavy Industrial grade EMS, EMI, UL60950-1, EN 50121-4,

 EN61000-6-2, EN61000-6-4

Specifications

Ethernet Interface

 Standards: IEEE802.3 (10Base-T), 802.3u (100Base-TX), 802.3ab

(1000Base-T)

 RJ-45 (shielded) Ports: 4 ports

 Speed: 10/100/1000M (Auto)

Optical Ethernet Interface

 IGS-401F-4PH(E)24: 1 port

 Connector Type: Fixed SC connector

 Multimode (2km) 50/125um, 62.5/125um

 Single mode (30km or 50km) 9/125um

 Wavelength: 1310nm (S/M or M/M)

 Speed: 1000Base-X

 IGS-402F-4PH(E)24: 2 ports

 Connector Type: Fixed SC connector

 Multimode (2km) 50/125um, 62.5/125um

 Single mode (30km or 50km) 9/125um

 Wavelength: 1310nm (S/M or M/M)

 Speed: 1000Base-X

 IGS-402S-4PH(E)24: 2 ports

 Fiber Type: SFP slots

 Speed: 100/1000Base-X

Switch Features

 Store & Forward Switch

 Supports IEEE802.3x Flow Control

 Auto MDI/MDI-X

 Duplex: Full/Half (Auto-negotiation per IEEE802.3u)

 Switching Fabric: 10Gbps non-blocking (IGS-401F-4PH(E)24); 12Gbps

non-blocking (IGS-402F-4PH(E)24 & IGS-402S-4PH(E)24)

 Packet Buffer Size: 1Mbits

 MAC Table: 8K

 MTU: 64~10240 bytes

Power over Ethernet

 4 PoE enabled ports, End Span Alternate A Mode

 Supports IEEE802.3af 15.4watts PoE per port

 Supports IEEE802.3at 30watts PoE+ per port

 Maximum 120W total PoE output power budget (30W per port)

 Positive (V+) pins 1,2; Negative (V-) pins 3,6; Data 1, 2, 3, 6, 4, 5, 7, 8

Power

 Absolute Input Range: 20~57VDC

 Support Power Input Reverse Polarity Protection

 Support Dual Power Inputs

 Support Removable Terminal Block

 Consumption*: 138.2W (48VDC), 143.2W (24VDC)

*Include full load 120W PoE Output

Mechanical

 Water & Dust Proof: IP30 Protection

 Dimensions: 106 mm (D) x 62.5 mm (W) x 135 mm (H)

 Mounting: DIN-Rail, Wall Mount (Optional)

 Weight: 840 g

Environmental

 Operating Temperature: -10°C~60°C (IGS-401F-4PH24, IGS-402F-

4PH24 & IGS-402S-4PH24 ); -40°C~75°C (IGS-401F-4PHE24, IGS-402F-

4PHE24 & IGS-402S-4PHE24)

 Storage Temperature: -40°C~85°C

 Humidity: 5%~95% (Non-condensing)

Certifications

 EMC: CE

 EMI (Electromagnetic Interference): FCC Part 15 Subpart B Class A, CE

EN55022 Class A

 Railway Traffic: EN50121-4

 Immunity for Heavy Industrial Environment: EN61000-6-2

 Emission for Heavy Industrial Environment: EN61000-6-4

 EMS (Electromagnetic Susceptibility) Protection Level:

 EN61000-4-2 (ESD) Level 3, Criteria B

 EN61000-4-3 (RS) Level 3, Criteria A

 EN61000-4-4 (Burst) Level 3, Criteria A

 EN61000-4-5 (Surge) Level 3, Criteria B

 EN61000-4-6 (CS) Level 3, Criteria A

 EN61000-4-8 (PFMF, Magnetic Field) Field Strength: 300A/m,

Criteria A

 Safety: UL60950-1

 Shock: IEC 60068-2-27

 Freefall: IEC 60068-2-32

 Vibration: IEC 60068-2-6

MTBF (MIL-HDBK-217)

 IGS-401F-4PH(E)24: 679,433 Hours

 IGS-402F-4PH(E)24: 635,099 Hours

 IGS-402S-4PH(E)24: 736,988 Hours

Panels

No.

Description

No.

Description

UTP RJ-45 ports

Speed LED indicators for UTP RJ-45

ports

Fixed fiber

Fiber LED indicators

Fiber optic SFP slots

PoE LED indicators

DIP switch

Terminal block

Power & Fault LED indicators

Earth grounding connection

Link/ACT LED indicators for UTP RJ-45 ports

Figure 1. IGS-401F-4PH(E)24

Front Panel

Figure 2. IGS-402F-4PH(E)24

Front Panel

Figure 3. IGS-402S-4PH(E)24

Front Panel

Figure 4. Top Panel

LAN & Fiber Ports

IGS-401F-4PH(E)24 & IGS-402F-4PH(E)24 models have 4 LAN ports

(labeled 1~4) and one fixed fiber port (labeled FIBER) or two fixed fiber

ports respectively on the front panel. IGS-402S-4PH(E)24 model has 4

LAN ports (labeled 1~4) on the front panel and one optical SFP slot. The

LAN ports that all utilize shielded RJ-45 connectors support

10/100/1000M; while the fixed fiber ports support 1000M and SFP ports

support 100/1000M.

PoE Ports

4 LAN ports (labeled 1~4) support PoE (Power over Ethernet) per

IEEE802.3af (15.4W) or IEEE802.3at (30W) for connection to standard

PoE PD (Power Devices) such as IP Cameras, Access Points, IP Phones,

Digital Signage, etc. PoE eliminates the need to run separate power to

these devices thereby simplifying deployment and reducing expenses.

The LAN ports may also connect to any non-PoE device for normal

Ethernet transmission without any damage to the non-PoE device or to

this device.

RJ-45 Ethernet Port Pinouts

RJ-45 Ethernet & PoE Pin Assignments

No.

RJ-45 Ethernet

PoE

Output

100Base-TX

1000Base-T

RX+

TRD 0+

V+

RX-

TRD 0-

V+

TX+

TRD 1+

V-

TRD 2+

TRD 2-

TX-

TRD 1-

V-

TRD 3+

TRD 3-

DIP Switch

IGS-401F-4PH(E)24 & 402F-4PH(E)24 use a 2-pole DIP switch for

configuration, while the IGS-402S-4PH(E)24 uses a 4-pole DIP switch for

configuration. Each pole of the switch has the following functions:

DIP No.

Status

Function

Description

OFF *

Alarm

Enable

Provide alarm relay and fault

LED indication if there is a

power failure in one supply.

Alarm

Disable

Disable alarm relay and fault

LED if there is a power failure

in one supply. Connecting to a

single power source, place

this switch ON to disable

alarm.

OFF *

BSP Enable

Enable broadcast storm

protection.

BSP Disable

Disable the broadcast storm

protection feature.

For IGS-402S-

4PH(E)24

Only

OFF *

Fiber 2

1000M

When set 'OFF', the port is

configured for Gigabit

Ethernet and requires a

1.25Gbps SFP module.

Fiber 2

100M

When set to 'ON', the port

supports Fast Ethernet rate

and should use an SFP rated

for 125~155Mbps.

For IGS-402S-

4PH(E)24

Only

OFF *

Fiber 1

1000M

When set 'OFF', the port is

configured for Gigabit

Ethernet and requires a

1.25Gbps SFP module.

Fiber 1

100M

When set to 'ON', the port

supports Fast Ethernet rate

and should use an SFP rated

for 125~155Mbps.

Recommended Power, Alarm, Ground Wiring

Scheme

DC Power Connection

A removable terminal block on the top panel provides both power

and alarm connections. Power can be provided through the dual inputs

from separate sources (PWR1 & PWR2). One power supply is enough to

power up the device. If two power supplies are used, the device

provides power redundancy function. See the figure provided below for

recommended DC power wiring scheme.

Figure 5. DC Power Connection

V-

V+

+ - + -

V+

V-

Alarm Relay Connection

The alarm relay contact can be wired into an alarm circuit which

senses an alarm condition when the contact is broken. The alarm relay is

normally closed when there is no alarm condition. The alarm conditions

are user programmable through management to include power, link

faults or other fault conditions. Please note that the alarm relay contact

can only support 1A current at 24VDC. Do not apply voltage and current

that exceed these specifications.

Figure 6. Alarm Relay Wiring

Earth Ground Connection

An earth ground connector is provided on the top panel with an

earth ground sign next to it. Grounding the device can help to release

leakage of electricity to the earth safely so as to reduce injuries from

electromagnetic interference (EMI).

Prior to connecting to the power, it is important to connect the

ground wire to the earth. Follow steps below to install ground wire:

1. Loosen or remove the grounding screw.

2. Attach the grounding screw to the ring-type or fork-type

terminal of the grounding cable. Make sure that the

grounding cable is long enough to reach the earth.

3. Use a screwdriver to fasten the grounding screw.

Figure 8. Grounding Cable Type Figure 9. Grounding Connection

Figure 7. Alarm Relay circuit

Normal (Relay Closed)

Fault (Relay Open)

Ring-type

Terminal

Fork-type

Terminal

LED Indicators

LED

Color

Status

Definition

PWR1

PWR2

Green

Power is connected and active at

the PWR1/PWR2 input terminal

connection.

Off

PWR1/PWR2 is not connected.

Fault

Amber

One of the power inputs has fault

condition (Alarm DIP switch must

be enabled).

Off

Normal operation without power

faults or Alarm DIP switch is

disabled.

Fiber

Green

Lit when the fiber port has an

optical link and will flash when

there is Ethernet traffic. (IGS-401F-

4PH(E)24)

Fiber 1

Fiber 2

Green

Lit when the fiber 1 / fiber 2 port

has an optical link. (IGS-402F-

4PH(E)24 & IGS-402S-4PH(E)24)

Blinking

Blinking when there is Ethernet

traffic.

100/

1000

Green

Lit when the LAN connected speed

is 100M.

Amber

Lit when the LAN connected speed

is 1000M.

Green/

Amber

Off

Remain off if the connected speed

is 10M.

LINK/ACT

Green

Lit when the LAN port has a link.

Blinking

Blinking when there is Ethernet

traffic.

Installation

The switch can be mounted on the wall or installed in DIN rail

depending on your installation needs. When installing the wall-mounting

bracket (optional accessory) and DIN rail bracket, be sure to correctly

align the orientation pin.

Figure 10. DIN Rail Figure 11. Wall Mount

The switch with DIN Rail bracket has a steel spring in the upper rail

of the bracket. This spring is compressed for mounting and un-mounting

by applying downward force.

Figure 12. Mounting Figure 13. Un-mounting

Version

Date

Description

1.6

2020/4/30

Use new document format

Revise spec.

Revise all top panel images

CTC Union IGS-402F?4PH24 Quick Installation Manual

Brand: CTC Union

Model: IGS-402F?4PH24

Category: Network switches

Type: Quick Installation Manual

This manual is also suitable for

Download PDF

report

CTC Union IGS-402F?4PH24 Quick Installation Manual

This manual is also suitable for

CTC Union IGS-402F?4PH24 Quick Installation Manual

Related papers

Other documents