Date – 02-July-2012 www.pbteen.com Page 1/3
Sleep & Study Loft Bed – Bookcase
PRE-ASSEMBLY:
• For your safety and ease, assembly by two adults is recommended.
• Please read all instructions before beginning assembly. The illustrations provided allow for easier assembly when
used in conjunction with the assembly instructions.
• Remove all parts and hardware from box and lay out on a carpeted or scratch-free work surface. The shipping
box provides and ideal work surface. Do not dispose of any contents until assembly is completed to avoid
accidentally discarding small parts or hardware.
• Use the parts and hardware lists to identify and separate each of the pieces included prior to starting assembly.
• Note: DO not fully tighten the bolts until all parts are in place. Failure to follow these instructions may cause the
bolts to misalign during assembly.
• Do not use power drill as it may cause cracking.
Assembly Instructions 1 of 4
Date – 02-July-2012 www.pbteen.com Page 2/3
HARDWARE LIST
(D7) Allen Key – 1x
(D8) Long Bolt 1/4” x 51mm – 4x
(D9) Short Bolt 1/4“x28mm –20x
(D10) Spring Washer – 24x
(D11) Flat Washer – 24x
ASSEMBLY INSTRUCTIONS:
1. Slide a Spring Washer (D10) and a Flat Washer (D11) onto each Long/Short Bolts (D8 & D9).
2. Attach Support Rail (D6) to bottom of the Center Shelf (D2). Insert (4) Long Bolts (D) with washers from
Support Rail (D6) into bottom of the Center Shelf (D2) by using Allen Key (D7). Note: Wooden cleat on the
Support Rail (D6) is close to surface of Center Shelf (D2) after assembly.
D6.
D2.
D7.
D10.
D11.
D8.
D1.
D1.
D2.
D1.
D6.
D3.
PARTS LIST
D1). Shelf – 3pcs
D2). Center Shelf – 1pc
D3). Bottom Shelf – 1pc
TOOLS REQUIRED:
Philips Screwdriver
(Not included)
D4). Side Panel – 1pc
D5). Cork Panel – 1pc
D6). Support Rail
–
1pc
D8
4x
Date – 02-July-2012 www.pbteen.com Page 3/3
3. Place Side Panel (D4) on a soft, scratch-free surface with bottom wooden blocks facing up. Attach (3) Shelf
(D1), Center Shelf (D2) and Bottom Shelf (D3) to Side Panel (D4) in sequence as shown below. Insert (2)
Shorts Bolts (D9) with washers from wooden cleat of each shelf into Side Panel (D4). Note: Wide apron of
Center Shelf (D2) and apron of Bottom Shelf (D3) face the edge without cut-out on bottom.
4. Place Cork Panel (D5) onto the assembled piece. Secure each shelf to Cork Panel (D5) by inserting (2) Short
Bolts (D9) with washers. Note: Cut-Out corner of the Side Panel and Corkboard Panel face each other.
Place the assembled bookcase in upright position. Check alignments and tighten all connecting bolts.
5. Assembly of Bookcase component completes.
CARE INSTRUCTIONS:
• Dust with a clean, soft cloth.
• Avoid the use of chemicals and harsh cleaning agents.
D5.
D7.
D10.
D11.
D9.
D4.
D1.
D1.
D3.
D7.
D10.
D11.
D9.
Bottom
Cut-Out
Corner
Bottom
Cut-out
Corner
Cut
-
o
ut
Cut
-
o
ut
D9
10
x
D9
10
x
-
1
-
2
-
3
PB Teen Sleep & Study Loft 1 Of 4 - Bookcase User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Home Decorators Collection 0898300210 Operating instructions
-
-
-
-
-
Body-Solid EXM1100S Owner's manual
-
Body Solid LAT-ATTACHMENT WLA48S User manual
-
Body-Solid DPEC-S Owner's manual
-
Body-Solid DPEC Assembly Manual
-
Body-Solid FMH Owner's manual
