Panasonic TH65PX600B Operating instructions

Category
LCD TVs
Type
Operating instructions
IDTV
SD CARD
DIRECT
TV REC
6
Operating Instructions
Plasma Television
English
Please read these instructions before operating your set and retain them for future reference.
The images shown in this manual are for illustrative purposes only.
U.K. Standard
Printed in Czech Republic
Model No. TH-65PX600B
Customers Record
The model number and serial number of this product may be found on its rear panel. You should note this serial
number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your
purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.
Model Number Serial Number
Information on Disposal for Users of W aste Electrical & Electronic Equipment
(private households)
T his s ymbol on t he produ cts and / or a cc ompan y ing do c umen ts means t ha t u s ed ele ct rical an d
electronic products should not be mixed with general household waste.
For proper treatment, recovery and recycling, please take these products to designated collection
points, where they will be accepted on a free of charge basis. Alternativel y , in some countries you
may be able to return your products to your local retailer upon the purchase of an equivalent new
product.
Di s posing o f t hi s produc t c orrec t ly will help t o s ave v aluable resources and pre v en t any po t en t ial nega t iv e
effects
on
human
health
and
the
environment
which
could
otherwise
arise
from
inappropriate
waste handling. Please contact your local authority for further details of your nearest designated collection point.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for
further information.
Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method
of disposal.
The attached speakers illustrated above are sold separately.
2 3
Viewing Advanced FAQs, etc.Quick Start Guide
Contents
Turn your living room into a home theatre!
Experience an amazing level of multi-media excitement
Safety Precautions ······································ 4
(Warning & Caution)
Notes ··························································· 5
Maintenance ··············································· 5
Be Sure to Read
Advanced Features
How to Use Menu Functions ····················· 21
(picture, sound quality, etc.)
DVB Settings (DVB) ·································· 26
(pay-TV, subtitles, etc.)
Profile Edit / Child Lock (DVB) ·················· 28
DVB Tuning Menu (DVB) ·························· 30
Displaying PC Screen on TV ····················· 31
Editing and Setting Channels (Analogue)
···· 32
Restore Settings ······································· 34
Owner ID ··················································· 35
Recording Controls ··································· 36
Viewing from card (Photos) ······················· 38
Q-Link Functions ······································· 40
HDMI Functions ········································ 41
External Equipment ··································· 44
Basic Features
Watching TV ·············································· 12
Using TV Guide (DVB) ······························ 14
Watching VCR, DVD and Satellites ··········16
Viewing Teletext ········································ 18
Enjoy your TV!
Technical Information ································ 46
FAQs ························································· 49
On screen messages ································ 52
Specifications ············································ 54
Licence ······················································ 55
Index ························································· 55
FAQs, etc.
Accessories/Options
············ 6
Identifying Controls
·············· 7
Basic Connection
·················· 8
Auto Setup
······························ 10
Enjoy rich multi-media
Quick Start Guide
Receive terrestrial digital services using an integrated (Digital Video Broadcasting) tuner
(Display DVB programmes with TV Guide (p. 14) / Timer recording (p. 36) /
Register and instantly call up favorite programmes with Profile Edit (p. 28))
Sharp pictures with HDMI terminal
Control DVD recorder / VCR via TV with Q-Link connection
(p. 40)
Create home theatre and DVD recorder link-ups with
"Control with HDMI" without complicated settings!
Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996)
TH-65PX600B Declaration of Conformity No 3979, 19th January 2006
Camcorder
Amplifier with
Speaker system
VCR
DVD player
DVD recorder
Personal
computer
Satellite receiver
SD memory card
Full HD Plasma Panel
This TV uses a high definition plasma panel (1920 × 1080 pixels) to produce high definition pictures
close to their original resolution.
4 5
4 : 3
12
Safety Precautions
AC 220-240 V
50 / 60 Hz
Do not display a still picture for a long time
This causes the image to remain on the plasma
screen ("after-image").
This is not considered a malfunction and is
not covered by the warranty.
To prevent after-image, the screen saver is
automatically activated after a few minutes if no signals
are sent or no operations are performed. (p. 50)
Electronic equipment
In particular, do not place video equipment near the TV
(electromagnetic interference may distort images / sound).
Equipment with an infrared sensor
This TV also emits infrared rays (this may affect
operation of other equipment).
Keep the TV away from these equipment
Warning & Caution
Typical still images
Channel number and other logos
Image displayed in 4:3 mode
Video game
Computer image
Notes
IMPORTANT: THE MOULDED MAINS PLUG
FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.
The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the mains plug which is
marked with the letter E or by the Earth symbol or coloured GREEN or GREEN-AND-YELLOW.
The wire which is coloured BLUE must be connected to the terminal in the mains plug
which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal in the mains plug
which is marked with the letter L or coloured RED.
How to replace the fuse.
Open the fuse compartment with a screwdriver and replace the fuse.
As the colours of the wire in the mains lead of this appliance may not correspond with the coloured markings
identifying the terminals in your mains plug, proceed as follows.
WARNING: – THIS APPARATUS MUST BE EARTHED.
IMPORTANT: – The wires in this mains lead are coloured in accordance with the following code: –
Green-and-Yellow: Earth
Blue: Neutral
Brown: Live
If a new mains plug is to be fitted, please observe the wiring code as shown below.
If in any doubt, please consult a qualified electrician.
If the fitted moulded mains plug is unsuitable for the socket outlet in your home, then the fuse shall be
removed and the mains plug cut off and disposed of safety. There is a danger of severe electrical shock
if the cut off mains plug is inserted into any 13 amp socket.
If the mains plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the mains plug must not be used until a replacement cover is obtained.
A replacement fuse cover may be purchased from your local Panasonic Dealer.
This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 10 amp fuse is
fitted in this mains plug. Shall the fuse need to be replaced, please ensure that the replacement fuse has a rating
of 10 amps and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark
ASA
or the BSI mark on the body of the fuse.
Handling the mains plug
Ensure that the mains plug is easily accessible at all times. The On / Off switch on this model does not fully disconnect the TV
from the mains supply. Remove the mains plug from the wall socket when the TV is not used for a prolonged period of time.
Ensure the grounding pin on the mains plug is securely connected to prevent electrical shock.
An apparatus with CLASS I construction shall be connected to a mains socket outlet with a protective earthing connection.
Note
If the TV is not switched off when the TV station stops transmitting, it will automatically go to standby mode after
30 minutes. This function will operate only in Analogue TV mode.
Do not expose to
direct sunlight and
other sources of heat
Avoid exposing the TV to direct sunlight
and other sources of heat. To prevent
fire never place any type of candle or
naked flame on top or near the TV.
Power source
This TV is designed to operate on 220-240V, 50 / 60 Hz AC.
Display panel
Cabinet
Mains plug
Daily care: Gently wipe the surface clean of dirt by using
a soft cloth.
Major contamination: Wipe the surface clean using a soft
cloth dampened with clean water or water containing a
small amount of neutral detergent. Then, using a soft dry
cloth, evenly wipe the surface clean until it is dry.
Daily care: Wipe the surface clean using a soft dry cloth.
Major contamination: Dampen a soft cloth with clean water
or water containing a small amount of neutral detergent.
Then, wring the cloth and wipe the surface clean with it.
Finally, wipe the surface clean with a dry cloth.
Wipe the mains plug with a dry cloth at regular intervals.
(Moisture and dust may lead to fire or electrical shock.)
First, remove the mains plug from the socket outlet.
Caution
The surface of the display panel has been specially
treated and may be easily damaged.
Do not tap or scratch the surface with your fingernail or
other hard object.
Use care not to subject the surface to insect repellent,
solvent, thinner, or other volatile substances
(this may degrade surface quality).
Caution
Use care not to subject the TV's surfaces to detergent.
(A liquid inside the TV could lead to product failure.)
Use care not to subject surfaces to insect repellent,
solvent, thinner, or other volatile substances
(this may deteriorate the surface by peeling the paint).
Do not allow the cabinet to make contact with a rubber
or PVC substance for a long time.
Maintenance
Do not remove the cover
Do not remove the rear cover as live parts are accessible when it is removed. There are no user serviceable parts inside.
Do not expose to rain or
excessive moisture
To prevent damage which might result in electric
shock or fire, do not expose this TV to rain or
excessive moisture.
This TV must not be exposed to dripping or
splashing water and objects filled with liquid,
such as vases, must not be placed on top of or
above the TV.
Do not block the rear
ventilation openings
Ventilation should not be impeded by covering
the ventilation openings with items such as
newspapers, tablecloths and curtains.
Cabinet and display panel care
Remove the mains plug from the wall socket.
The cabinet and display panel can be cleaned
with a soft cloth moistened with mild detergent
and water. Do not use solutions containing
benzol or petroleum.
TV can produce static electricity, care must be
taken whenever touching the TV screen.
Use only the dedicated
stands / mounting equipment
Using an unauthorized stand or other fixtures may
make the TV shaky, risking injury. Be sure to ask
your local Panasonic dealer to perform setup.
Use optional stands / mounts (p. 6).
Do not place the TV on
sloped or unstable surfaces
The TV may fall off or tip over.
Due to weight and size please ensure a quali ed technician installs this product
Allow sufficient space around
the TV for radiated heat
10
10
6
10
7
(cm)
Do not allow children to
handle SD card
As with an small object, SD card can be
swallowed by young children. Please remove
SD card immediately after use.
Transport only in upright position
Transporting the TV with its display panel facing upright or downward may cause damage to the internal circuitry.
6 7
Quick Start Guide
IDTV
AV4
HDMI3 AUDIO AV
VLRS-V
PULL
SD CARD
DIRECT
TV REC
Installing remote's batteries
Batteries for the Remote
Control Transmitter
(2)
R6 (UM3)
Identifying ControlsAccessories/Options
Clamper (2)
TMME258
Mains Lead
K2CT3DH00025
1
Pull
open
Hook
2
Note the correct
polarity (+ or -)
Close
Caution
Incorrect installation may cause battery
leakage and corrosion, resulting in
damage to the remote control.
Do not mix old and new batteries.
Do not mix different battery types (such
as alkaline and manganese batteries).
Do not use rechargeable (Ni-Cd)
batteries.
Do not burn or breakup batteries.
Remote Control
Transmitter
N2QAYB000071
Operating Instructions
Pan European Guarantee Card
1 Year Guarantee Registration
CRM
(Customer Relationship Management)
Attaching the cable clampers
Do not bundle the RF cable and mains lead together (could cause
distorted image).
Fix cables with clampers as necessary.
When using the optional accessory, follow the option’s assembly
manual to fix cables.
Normalises
(p. 22)
(Resets all settings to their default levels)
Cursor buttons to make selections and
adjustments
Standard accessories
Identifying Controls
Accessories/Options
Check that you have the accessories and items shown
Ferrite core (4)
J0KF00000018 (Small size) × 1
J0KG00000014 (Large size) × 3
Rear of the TV
MULTI WINDOW (p. 13)
Snap open
Snap shut
Remove from the TV
Push both side
hooks and pull out
Optional accessories
Speakers Pedestal Wall-hanging bracket
(vertical)
TY-WK65PV7
TY-SP65PV600
TY-ST65PV500
Caution
In order to maintain the unit’s performance and safety, be absolutely sure to ask your dealer or a licenced
contractor to secure the wall-hanging bracket.
Carefully read the instructions accompanying the speakers or pedestal, and be absolutely sure to take steps
to prevent the TV from tipping over.
Handle the TV carefully during installation since subjecting it to impact or other forces may cause product damage.
Function
select
Increases or decreases the programme position by one. When
a function is already displayed, press to increase or decrease
the selected function. When in Standby mode, switches TV On.
MAINS Power
On / Off switch
Lift door
to open
C.A.T.S. (Contrast Automatic Tracking System) sensor
(senses brightness to adjust picture quality in "Auto" viewing mode) (p. 23)
Power LED
Remote control
signal receiver
TV/AV
switch
Headphones
jack (p. 44)
AV4 terminals (p. 44)
STR (Normalisation store)
Stores tuning and other
function settings
( )
SD CARD slot (p. 39)
Standby On / Off switch
(Switches TV On or Off standby)
Sound mute On / Off
Changes picture aspect ratio
(p. 13)
TV Guide (p. 14)
Selects programmes in sequence
Subtitles
(p. 13) (To view subtitles)
Teletext (p. 18)
OK button to confirm selections and choices.
Press after selecting programme positions
1 - 99 (0 - 9 in Analogue mode) to avoid delay.
Volume
Teletext Index (p. 20)
Still Picture (p. 13)
Coloured buttons used for the
selection, navigation and operation of
various functions.
EXIT (Returns to TV screen)
Switch between viewing TV or AV input.
(p. 16)
VCR / DVD operations (p. 17)
MENU
Press to access the Picture, Sound and
Setup menus (p. 22 and p. 24)
Direct channel access
Use together with numeric buttons to access
analogue TV channels by entering UHF
broadcast channel number.
(p. 12)
Viewing SD Card (p. 38)
DIRECT TV Recording
To immediately record programme in VCR /
DVD recorder with Q-Link connection (p. 40)
Switches Timer recording On/Off (p. 36)
Switches DVB (digital broadcasting) /
Analogue mode (p. 12)
Programme / channel change buttons (0-9)
and Teletext page buttons.
(p. 12 and p. 18)
When in Standby mode, switches TV On.
HDMI3 terminal
(p. 44)
Volume / Contrast / Brightness / Colour /
Sharpness / Tint (NTSC mode) / Bass / Treble /
Balance / Manual tuning (analogue mode) (p. 32)
Standby: red
On: green
When using the remote control,
indicates the TV has received a
command.
DVB LED
Active for Timer Programming or
Standby for Direct TV Recording :orange (flash)
Timer Programming On :orange
Programme Information (p. 13)
8 9
Quick Start Guide
RGB
VIDEO
S VIDEO
AV1
VIDEO
S VIDEO
RGB
VIDEO
AV3
(Q-Link)
AV2
(Q-Link)
COMPONENT
RF OUT
RF IN
RF OUT
RF IN
RF IN
COMPONENT
RGB
VIDEO
S VIDEO
VIDEO
S VIDEO
RGB
VIDEO
AV3
(Q-Link)
AV2
(Q-Link)
AV1
COMPONENT
AV1
RF OUT
RF IN
RGB
VIDEO
S VIDEO
VIDEO
S VIDEO
RGB
VIDEO
AV3
(Q-Link)
AV2
(Q-Link)
Basic Connection
DVD Recorder
or VCR
SCART cable
(fully wired)
RF cable
Aerial
Mains lead (supplied)
Clamper
To unfasten
Mains lead (supplied) Mains lead (supplied)
SCART cable
(fully wired)
DVD Recorder or VCR
RF
cable
Aerial Aerial
Rear of the TV Rear of the TV
Rear of the TV
Satellite receiver
External equipment and cables shown are not supplied with this TV.
Please ensure that the TV is disconnected from the mains socket before attaching or disconnecting any leads.
Basic Connection
SCART cable
(fully wired)
Ex.
1
Connecting aerial
(TV only)
Ex.
2
Connecting DVD Recorder (VCR)
(TV, DVD Recorder and VCR
)
Note
Connect to AV3 for a DVD Recorder / VCR supporting Q-Link (p. 40).
Connect to AV1 for a Satellite receiver.
If connecting the TV and Satellite receiver with SCART cable, you can watch satellite broadcast by RGB input signal.
Ex.
3
Connecting DVD Recorder (VCR) and Satellite receiver
(
TV, DVD Recorder, VCR and satellite
)
AC 220-240 V
50 / 60 Hz
SCART cable
(fully wired)
RF cable
RF cable
RF cable
RF cable
RF cable
SCART:
21 pin connection used for video, audio and switching signals (Also known as Euro SCART and Peritel)
RF: Radio Frequency - Signal received from terrestrial aerial.
RGB / S-Video / Video:
Choose between these three video formats depending on personal preference and equipment requirement.
(RGB - Red, Green and Blue)
VCR: Video Cassette Recorder
DVD: Digital Versatile Disc
within
10 cm
Ferrite core
(Large size)
within
10 cm
within
10 cm
Ferrite core
(Large size)
Press the cable
through and close
Pull back the
tabs to open
10 11
Quick Start Guide
IDTV
012345678 9
Y ou now have the opportunit y
to enter your details an d
help the police crack crim e
see instruction boo k
PIN NUMBER :
NAME :
POSTCODE :
Owner ID
HOUSE NO :
∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
∗ ∗ ∗ ∗
Exit
Select character
Change character
Store Owner ID
Please W ait !
DVB Auto Setup
Prog. Channel Service Name NetID. TS ID. Quality
This will take about 3 mins.
4
5
6
7
8
30
30
30
30
30
12302
12302
12302
12302
12302
4158
4158
4158
4158
4158
9
9
9
9
9
BBC NEWS 24
BBCI
CBBC Channel
BBC Radio W ales
BBC Radio Cymru
68 21
Exit
DOWNLOAD IN PROGRESS
PLEASE WAIT
Programme : 63
Remote control unavailable
012345678 9
Y ou now have the opportunit y
to enter your details an d
help the police crack crim e
see instruction boo k
PIN NUMBER :
NAME :
POSTCODE :
Owner ID
HOUSE NO :
∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
∗ ∗ ∗ ∗
Exit
Select character
Change character
Store Owner ID
Plug the TV into mains socket and switch On
(Takes a few seconds to be displayed)
Usable characters and numbers
1
(example: Owner ID)
On-screen operation
guide will help you.
Auto Setup
Following the on-screen operation
guide, enter your own choice of PIN
number, name, etc.
For detailed procedures
"Owner ID" (p. 35)
Make a note of the PIN number
in case you forget it.
Search and store TV channels automatically.
These steps are not necessary if the setup has been completed by your local dealer.
When inputting owner ID
Auto Setup is now complete and your TV is ready for viewing.
When inputting owner ID later
You can now use the remote
control to turn On the TV or turn
the TV to standby mode.
(Power LED: On)
2
If you input the ID later
"Owner ID" (p. 35)
If a compatible recording equipment
with Q-Link or similar technologies
(p. 40) is connected, analogue
channel information is automatically
downloaded to the equipment.
Auto Setup will start to search for
TV channels and store them.
To check programme list
at-a-glance
TV Guide (DVB) (p. 14)
Programme Guide (Analogue)
(p. 15)
To edit analogue channels
"Programme edit" (p. 33)
The sorted programme order
depends upon the TV signal,
the broadcasting system and
reception conditions.
ON SCREEN HELP Instructions box
used to open the main menus and to return to the previous menu
used to exit the menu system and return to the normal viewing screen
used to move the cursor and select menus
used to access menus, adjust levels or to select from a range of options
used to store settings after adjustments have been made or options have been set
Many features available on this TV can be accessed via the On Screen Display
menu.
Note
If tuning and downloading data have failed, perform
"Auto Setup"
(
p. 33).
If you turned the TV Off during Standby mode last time, the TV will
be in Standby mode when you turn the TV On with MAINS power
On / Off switch.
How to use remote control
Auto Setup
Using the
On Screen
Displays
12 13
Viewing
14 : 9
Corontation Street
20:00~20:55
Change Category
For info press
1 BBC ONE WALES
20:30
Multi-Audio
Encrypted
TXT
Subtitle
Now
Profile 1
SwapSource
2
AV1
SwapSource
2
AV1
SwapSource
2
AV1
SwapSource
2
AV1
Corontation Street
20:00~20:55
Change Category
For info press
1 BBC ONE WALES
20:30
Multi-Audio
Encrypted
TXT
Subtitle
Now
Profile 1
red
red red
blue
In DVB
To select programmes using TV Guide (p. 14)
In Analogue
To select a channel using programme guide (p. 15)
To select a channel inputting the channel number, e.g. 39.
Watching TV
Select a channel
up
Volume
3
2
DVB
Analogue
1
1
CH_ _
Note
To watch pay-TV (p. 27)
Select DVB (Digital Video Broadcasting) or
Analogue
Information banner
Turn power on
BBC 1
Freeze / unfreeze picture
Hold
Display
subtitles
Display / hide subtitles (if available)
Other useful functions (Operate after )
MAINS power On / Off switch should be On.
Picture will appear.
(Press for about 1 second)
down
Display
information
banner
Display programme information
In DVB:
In Analogue:
Displays analogue information for a few seconds.
Change
aspect
ratio
or
Each press changes the mode.
While the bar is displayed
red
green
Auto aspect / 16:9 / 14:9 / 4:3 / Zoom1 / Zoom2 / Zoom3
Channel
Programme
Broadcast time
Current time
During scrambled
broadcasting
Category
Features
available
To change the
category
blue
To change the mode with colour buttons
Change the aspect ratio (p. 46)
Enjoy viewing the picture at its optimum size and aspect
1
To set display timeout (p. 27)
To hide
Information of another channel
Information on next programme
To watch the programme listed in the banner
Extra information
(To normal banner
)
Appears also when changing channel.
View in multi window (p. 46)
Watch TV,
DVD, etc.
in multi
window
Main
screen
Colour bar Sub
screen
To change the layout,
etc. first show the
colour bar
To change the layout
red
green
To swap
blue
To change the source
of sub screen
yellow
To return to the
normal single-screen
view
Remote control operations
apply to the main screen.
Watching TV
To change the language for DVB "Preferred subtitles" (p. 27) (If available)
14 15
Viewing
IDTV
Exit
Info
Change display mode
Select Programme
Select channel
T imer Programming
Categor y Prog. typ e
+24 H r
DVB TV Guid e
: Portrai t
W ed 12/05/04 10:4 6
W ed 12t h
Prog. typ e
Categor y
All Service s
All T ype s
Page u p
Page dow n
Categor y
All Service s
19:30~20:0 0
20:00~20:3 0
20:30~21:0 0
21:00~22:0 0
22:00~22:3 0
22:30~23:0 0
23:00~23:1 0
23:10~00:0 0
Eastender
DlY SOS
The Bill
Red Cap
Live junction
POP 100
Cinema info
Sports
1 BBC 1 2 BBC 2 44 Channel 4 444 SC 4
All Services
Free TV
Pay TV
Radio
Information
Profile 1
Profile 2
Profile 3
Profile 4
Category
All Services
All Services
Free TV
Pay TV
Radio
Information
Profile 1
Profile 2
Profile 3
Profile 4
Category
All Services
Red Cap
The Bill
Good bye
Terminator
News
The Bill
So
Hell
The
21:00 21:30
Red Cap
The Bill
Good bye
Terminator
News
The Bill
So
Hell
The
21:00 21:30
All Types
Movies
News
Entertainment
Sport
Children’s
Education
Lifestyle
Drama
Prog. type
All Types
Exit
Info
Change display mode
Select channel
Select Programme
T imer Programming
Categor y Prog. typ e
-24 H r +24 H r
DVB TV Guid e
:Landscap e
Thu 05/08/04 18:5 0
BBC1
BBC2
ITV1
Channel4
five
ITV2
SC4
1
2
21
44
122
142
144
Eastende r
Hot W ar s
Emmerdal .
10 O
'
clock News BB C
Panorom a
I'm A Celebrit y
Rugb y
Red Ca p
The Bil l
Good by e
T erminato r
New s
The Bil l
S o
Hel l
Th e
Fri 6t h
DI Y SO S
Coronation Stree t
Sex And The Cit y
15 T o 1
The Bil l
Holiday Progra m
Pepsi Cha r .
Pop Ido l
20:00-20:3 0
T ime : 19:3 0 20:0 0
DIY SOS: W e open in the Battersdy s
Prog. typ e
Categor y
All Service s
20:3 0 21:0 0 21:3 0
All T ype s
Page u p
Page dow n
Categor y
All Service s
Exit
Return to List
View Programme
DVB T V Guide
Thu 05/08/04 18:4 9
Exit
Return
Select timer
Edit timer
Delete
DVB Timer Programming
Thu 05/08/04 18:49
0 9
1
3
BBC1
ITV1
6/8 FR
7/8 SA
18:00
21:30
20:00
22:30
120
60
Off
Off
Pos.
Name
Date Start End
min.
Analogue Programme Guide
Prog. Name Chan.
VCR :
1 :
2 :
3 :
4 :
5 :
6 :
7 :
8 :
9 :
10 :
11 :
12 :
CH21
CH44
CH51
CH41
CH47
CH23
CH26
CH58
-
-
-
-
-
BBC1
BBC2
ITV
S4C
Prog. Name Chan.
13 :
14 :
15 :
16 :
17 :
18 :
19 :
20 :
21 :
22 :
23 :
24 :
-
-
-
-
-
-
-
-
-
-
-
-
red
green
yellow
blue
TV Guide
time
Channel
To change the layout
(Landscape / Portrait)
To previous day
To next day
To view a
programme list
of the selected
category
To view a
programme list
of the
selected type
Using TV Guide
Portrait (Displays by time)
select
category
TV Guide
Electronic Programme Guide (EPG) provides an on-screen listing of programmes currently
broadcast and future broadcasts over the next seven days (depending on the broadcaster).
TV Guide
date
Programme (TV Guide start page)
View TV Guide (landscape or portrait)
select
type
Current date and time
(Category list)
(Type list)
To list favourite
channels (p. 29)
To return to TV
(DVB mode)
view
view
If in Analogue mode
Select DVB
Landscape
(Displays by
broadcaster)
View "Portrait" to see one channel at a time
View "Landscape" to see many channels
2
1
Note
When this TV is turned on for the first time, or the TV is switched off for more than a week, it may take some time
before the TV Guide is completely shown.
When recording programmes, you must make the proper settings on the external recording equipment connected
to the TV.
If a compatible recording equipment with Q-Link or similar technologies is connected to the TV (p. 8) and the
"Q-Link" settings (p. 25) are completed, no setting of the equipment is required.
Also read the manual of the recording equipment.
Select
the programme
select
Details
View details
of the
programme
To return
to the start page
select
Select the programme now on the air
(TV screen)
Watch the
programme
watch
DVB LED
Select the programme to be broadcast
and select the recording device
Timer
programming
to record
To check / change / cancel a timer
programming event
"Timer Programming" (p. 36)
Orange DVB LED
(Rapid blinking during recording)
Using TV Guide (DVB)
In Analogue – Analogue Programme Guide (Analogue mode)
The Analogue Programme Guide shows channel list only. (No programme info in Analogue mode)
If in DVB mode
Select Analogue
View a channel list
Select the channel and watch
To change pages
Other useful functions (Operate after )
View details
(Analogue mode)
(Timer Programming screen)
Turn On the DVB LED
select
set
select
watch
To return to TV Guide
16 17
Viewing
Terminal
AV1 AV2 AV3 AV4
Component
PC
HDMI1 HDMI2 HDMI3
Manual input
selection
AV1
AV2
AV2S
(S-video input)
AV3
AV3S
(S-video input)
AV4
AV4S
(S-video input)
Component
PC
HDMI1 HDMI2 HDMI3
Auto input
selection
EC1/RGB
AV1/RGB
(RGB input)
EC2
EC3/RGB
AV3/RGB
(RGB input)
――
EC/
HDMI1
HDMI2 HDMI3
HDMI1/2/3
green
red
yellow
green
yellow
blue
red
blue
Watching VCR, DVD and Satellites
2
3
Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch the input.
Connect the Satellite receiver and you can watch satellite broadcasts.
To connect the equipment (p. 8 and p. 9)
The Remote Control is capable of operating some functions of selected Panasonic external equipment.
Select the connector
connected to the equipment
AV1 AV2/
S-video
AV3/
S-video
AV4/
S-video
Component/
PC
(AV mode screen)
Note
You can also select the connector using the TV/AV button on the front panel
of the TV.
Press the button repeatedly until you reach the connector to view.
If the external equipment has an aspect adjustment function, set to "16:9".
For details, see the manual of the equipment or ask your local dealer.
HDMI (p. 41)
To return to TV
example: AV1
red
PC
blue
yellow
(twice)
Select the external input
HDMI1/
HDMI2/
HDMI3
Displays the selected connector
1
Turn the TV on
When connecting with SCART as example 2 or 3 (p. 8 and p. 9)
Receives input signals automatically when playback starts or
satellite receiver is switched on
Input signals are automatically identified by the SCART (pin 8) terminal.
This function will be available for HDMI connection too (p. 41).
If input mode is not switched automatically
Perform and
When colour bar disappears Press any coloured buttons
Dependant on DVD/VCR setup
Screen display
Watching VCR, DVD and Satellites
VCR / DVD switch
Select VCR to operate Panasonic VCR or DVD equipment
Select DVD to operate Panasonic DVD equipment or Player home theatre
Standby
Set to Standby mode / Turn on
Play
Playback videocassette / DVD
Stop
Stop the operations
Rewind / Skip / Search
VCR: Rewind, view the picture rapidly in reverse
DVD: Skip to the previous track or title
Press and hold to search backward
Fast-forward / Skip / Search
VCR: Fast-forward, view the picture rapidly forward
DVD: Skip to the next track or title
Press and hold to search forward
Pause
Pause / Restart
DVD: Press and hold to play at slow speed
Programme Up / Down
Select programme
Record
Start recording
Panasonic equipment connected to the TV can be directly operated with the remote control.
Note
Confirm correct operation after code changed.
The codes will be reset to default values if batteries are replaced.
"DVD" means DVD player, DVD recorders and Recorder home theatre.
Some operations may not be possible on some equipment models.
Setting your remote control to operate Panasonic VCR, DVD, etc.
Set the VCR / DVD switch to the appropriate position
Press and hold during the following operations
Enter the appropriate code for the equipment
to be controlled, see table below
Press
"VCR" position
Equipment Code
VCR 10 (default)
DVD 11
"DVD" position
Equipment Code
DVD 70 (default)
Player home theatre
71
18 19
Viewing
17:51 28 Feb
Corontation Street
20:00~20:55
Change Category
For info press
1 BBC ONE WALES
20:30
Multi-Audio TXT
Subtitle
Now
Profile 1
<< 01 02 03 04 05 06 07 >>
TELETEXT
INFORMATION
17:51 28 Feb
red
green
To return to TV
Viewing Teletext
Switch to Teletext
How to use
In all cases, it is possible to navigate the pages using buttons on the
remote control, but because the commands available must apply to all
manufacturers of DVB equipment, some on screen commands may
not correspond exactly to the remote control buttons.
For example:
3
You can enjoy news, weather forecasts and subtitles, etc. (depending on the broadcaster)
Note
As soon as you switch to a DVB channel with links to a teletext service,
software is downloaded in the background to enable the teletext function.
This means that when switching to a DVB channel, you should wait for
approximately 5 seconds before pressing the TEXT button - this will allow
the software to download. If you press the TEXT button before download is
complete, there will be a short delay before the text screen is displayed.
While navigating DVB teletext, you will find there is a short delay when
moving between pages while the page downloads. There is often a prompt
shown somewhere on the page (for example "Loading") to let you know that
this is happening.
DVB (digital broadcasting) mode
DVB teletext services
DVB teletext services differ greatly from analogue teletext.
When you switch to a DVB teletext service, the images
you see can contain graphics and text, laid out and
controlled in a manner decided by the broadcaster.
You can check if the programme has teletext information.
To change the
channel
When "select" or "go" is displayed
When "", "", "", "" symbol is displayed
When the key words are displayed on colour bar
red
green
yellow
blue
When options with numbers are displayed
When "i" is displayed (information)
Displayed if
programme has
teletext information
1
If in Analogue mode
Select DVB
Information
banner (p. 13)
2
DVB teletext will not work if
subtitles are switched on.
Subtitles must be switched
off for teletext to work. (p. 13)
FULL /
TOP /
BOTTOM
Reveal
hidden
data
(TOP) (BOTTOM) Normal (FULL)
Re-hide
red
Reveal hidden words e.g. quiz page answers
Viewing Teletext
Switch to Teletext
Select the page
3
Analogue mode
To adjust contrast
1
If in DVB mode
Select Analogue
Displays the
index page
(content varies
depending on the
broadcasters)
up
or
or
(Corresponds to the colour bar)
down
red
green
yellow
blue
Using Analogue teletext
What is FASTEXT mode (default)?
In FASTEXT mode, four differently coloured subjects are situated at the bottom of the screen. To access more information about one
of these subjects, press the appropriately coloured button. This facility enables fast access to information on the subjects shown.
What is List mode?
In List mode, four differently coloured page numbers are situated at the bottom of the screen. Each of these
numbers can be altered and stored in the TV’s memory. ("Store frequently viewed pages", p. 20)
To change mode "Teletext" in Setup menu (p. 25)
Time / date
Sub page number
Colour bar
As the blue bar is displayed
(Expand the BOTTOM half)
(Continued)
2
To return to TV
Current
page
number
20
Advanced
21
Viewing
W / B High R
W / B High B
W / B Low R
W / B Low B
Gamma 2.2
Advanced setting
P108
Main menu
Picture menu
Sound menu
Setup menu
AU T O SETU P IN PROGRESS
SEARCHING : PLEASE W AIT
21 68
CH44
Exit
Return
Programme edit
Auto setup
Manual tuning
Tuning Menu
Access
Access
Access
Delete Add Move Download
Programme edit
Prog. Chan. Name Lock
1 :
2 :
3 :
4 :
5 :
CH44
CH51
CH41
CH47
CH37
ABC
XYZ
FTP
123
456
Off
Off
Off
Off
Off
DVB Timer Programming
Thu 05/08/04 18:49
1
3
BBC1
ITV1
6/8 FR
7/8 SA
18:00
21:30
20:00
22:30
120
60
Off
Off
Pos.
Name
Date Start End
min.
Profile Editor
1 BBC ONE Wales
2 BBC 2W
7 BBC THREE
10 BBC FOUR
30 CBBC Channel
31 CBeebies
All Services Profile 1
Child Lock Service List
1 BBC ONE Wales
2 BBC 2W
7 BBC THREE
30 CBBC Channel
51 BBCi
89 BBC Radio Wales
Clock
Input resolution
H-pos
V-pos
Clock phase
Sync H & V
VGA
PC setup
DVB Programme
0510
Signal Condition
CH30 1 BBC ONE Wales
Signal Strength
Signal Quality
PC setup
Control with HDMI
Off timer
Tuning Menu
Owner ID
Shipping condition
Setup menu
Access
On
Q-Link
AV2
AV2 out
Monitor
Off
SD card LED
On
Power on preference
TV
Access
DVB Setup Menu
Access
Access
Access
Teletext
FASTEXT
Power save
Off
Side panel
Off
Volume correction
yellow yellow
Only available in AV, PC, HDMI
and component
Store
frequently
viewed
pages
View in
multi
window
HOLD
Subtitles
Watch
TV while
waiting
for update
If you wish to hold the current page without updating
Stop automatic updating
Appears
when
updating is
completed
(You cannot change the channel.)
Teletext automatically updates itself when new information becomes available.
The news page provides a function that indicates arrival of latest news ("News Flash").
Changes to TV screen temporarily
View the
updated
page
Watch TV and Teletext in two windows at once
Operations can be made only in Teletext screen.
Viewing Teletext
(Continued)
INDEX
View sub
page
Factory setting is "P888" (subtitle service) on blue button.
View subtitles by pressing STTL button
FASTEXT mode only
Return to the main index page
Enter the
4-digit number
example: P6
Appears at top of the
screen
To view specific sub page
blue
Sub pages:
The number of sub pages varies depending on the broadcasters (up to 79 pages).
It may take some time for searching, during which time you can watch TV.
Store frequently viewed pages
(only on first 25 channels on Programme Guide)
in the colour bar
(List mode only)
press
and
hold
As page is
displayed
The number changes to white.
Corresponding
colour button
If you wish to use
Subtitles, do not
change number on
blue button.
To change stored pages
press
and
hold
Enter new page number
Using Analogue teletext (Continued)
To resume
Colour button you
want to change
View sub page (Only when teletext is more than one page)
View the TV picture while searching for a teletext page
Analogue mode
How to Use Menu Functions (picture, sound quality, etc.)
Viewing Teletext
How to Use Menu Functions
change or access
select
Only available in NTSC / PAL
Not available in DVB
Only available in HDMI
Only available in PC
Not available in PC
Only available in NTSC signal
How to operate (p. 22 and p. 24)
NTSC (National Television System Committee):
One of television signal used in USA, etc.
(p. 31)
Only available in PC
(p. 31)
(p. 32)
(p. 28 and p. 36)
(p. 34)
(p. 35)
(p. 37)
(p. 29)
(p. 29)
(p. 30)
(p. 26)
English
3 seconds
Common Interface Module
System Update
DVB System Setup
Access
Access
Display Timeout
Preferred Subtitles
DVB Auto Setup
New Service Message
DVB Tuning Menu
Access
Access
Access
On
Signal Condition
Add New Service
Auto Update Search in Standby
Software Licence
System Update
On
Access
Access
System Update Search Now
012345678 9
Y ou now have the opportunit y
to enter your details an d
help the police crack crim e
see instruction boo k
PIN NUMBER :
NAME :
POSTCODE :
Owner ID
HOUSE NO :
∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
∗ ∗ ∗ ∗
Exit
Select character
Change character
Store Owner ID
All tuning data will be erased
Shipping condition
Exit
Return
Start
Slot 1: No module inserted
Common Interface
Access
Timer Programming
Child Lock
DVB Setup menu
Multi Audio
Access
Access
Access
Access
Access
DVB System Setup
eng
DVB Tuning Menu
Profile Edit
Viewing mode
Contrast
Brightness
Colour
Sharpness
Tint
Colour balance
Colour management
3D-COMB
Normal
On
On
Picture menu
Dynamic
Advanced setting Access
P-NR
Off
-
+
-
+
-
+
-
+
Bass
-
+
-
+
-
+
Treble
Balance
Headphone volume
NICAM
Mode
SRS TruSurround XT
Sound menu
Off
Music
HDMI1 input
Auto
Off
Please Wait !
DVB Auto Setup
Prog. Channel Service Name NetID. TS ID. Quality
This will take about 3 mins.
4
5
6
7
8
30
30
30
30
30
12302
12302
12302
12302
12302
4158
4158
4158
4158
4158
9
9
9
9
9
BBC NEWS 24
BBCI
CBBC Channel
BBC Radio Wales
BBC Radio Cymru
68 21
Manual tuning
21 68
CH44
1
Exit
Search down/up
Return
Direct entry
Store
C
0 9
22
Advanced
23
Menu
Item Adjustments / Configurations (alternatives)
Picture menu
Viewing mode
Selects four different screen settings (Dynamic / Normal / Cinema / Auto)
In each Viewing mode setting, Contrast, Brightness, Colour, Sharpness, Tint (in NTSC
only), Colour balance, Colour management and 3D-COMB can be adjusted and stored
to suit your particular viewing requirement (e.g., you may require different settings for
viewing sports, films, news etc.)
Changes to any settings in a viewing mode will affect all signal sources: RF, AV1, AV2,
AV3, AV4, Component, PC, HDMI and SD Card
Changes will be stored automatically. By analysing and processing the incoming
picture, all four modes feature automatic enhancement
Adjust by each viewing mode
Contrast
Brightness
Colour
Sharpness
Increases or decreases the levels of these options according to your personal preference
Tint
With an NTSC signal source connected to the TV, the picture hue can be adjusted to
suit your taste
Colour balance
Allows you to set the overall colour tone of the picture (Cool / Normal / Warm)
Colour
management
Automatically adjusts colours to vivid ones (Off / On)
P-NR
Picture Noise Reduction
Automatically reduces unwanted picture noise and flicker noise in the contoured parts
of a picture (Off / Min / Mid / Max)
Not valid on PC signal
3D-COMB
Occasionally, whilst viewing still or slow moving pictures, colour patterning may be seen
Set to On to display sharper and more accurate colours (Off / On)
For PAL or NTSC signal reception only
Not valid on RGB, S-Video, components, PC, HDMI and SD Card
Analogue mode only
Sound menu
Bass
Increases or decreases level to enhance or minimise lower, deeper sound output
Treble
Increases or decreases level to enhance or minimise sharper, higher sound output
Balance
Adjusts volume level of right and left speakers
Headphone volume
Adjusts the volume of the headphones
NICAM
NICAM (Near Instantaneous Companded Audio Multiplex)
A format for digital sound over television
Reproduces stereo sound (Off / On)
Off if reception is poor (FM monaural sound)
Analogue mode only
Mode
Sound quality can be improved when watching music scene or drama (Music / Speech)
SRS TruSurround XT
SRS TruSurround XT
®
creates a high quality surround sound effect using just two
speakers from the source which can output surround encoded signals (Off / On)
HDMI1 / 3 input
Select to fit the input signal
(Auto / Digital / Analogue) (p. 41)
Auto : Automatic detection of digital or analogue sound source
Digital : HDMI cable connection
Analogue : HDMI-DVI adapter cable connection
HDMI input mode only
HDMI2 terminal is for digital signal only
No setting for HDMI2 available
Main menu
Picture menu
Sound menu
Setup menu
Viewing mode
Contrast
Brightness
Colour
Sharpness
Tint
Colour balance
Colour management
Normal
On
P-NR
Off
Picture menu
Dynamic
3D-COMB On
Viewing mode
Contrast
Brightness
Colour
Sharpness
Tint
Colour balance
Colour management
Normal
On
f
P-NR
Off
3D-COMB On
Picture menu
Dynamic
Colour balance
Normal
Sharpness
How to Use Menu Functions
Display menu
3
2
4
Various menus allow you to make settings for the picture, sound, and other functions.
Displays the functions that can be set
(varies according to the input signal)
Note
To initialize all settings
"Shipping condition"
(p. 34).
To return to TV
at any time
To return to the
previous screen
Select the menu
Select the item
(example: Picture menu)
select
select
Adjust or select
change
(example: Picture menu)
(example: Picture menu)
Changed
Number and positions
of alternatives
Moved
Choose from among alternatives
Adjust using the slide bar
To reset the setting
access
store
(Required by some
functions)
Setup menu (p. 24)
1
Resets each Viewing mode (Dynamic / Normal / Cinema) to the default
settings.
P-NR in Picture menu is reset to off.
Aspect mode is also reset to Auto aspect.
Menu list
How to Use Menu Functions
(picture, sound quality, etc.)
A different menu will be displayed while PC or SD Card is used. (p. 31 and p. 39)
In AV mode, the Sound menu gives a reduced number of options.
24
Advanced
25
Menu
Item Adjustments / Configurations (alternatives)
Setup menu
Q-Link
Selects which AV terminal is to be used for data communication between this TV and a
compatible recording equipment (AV2 / AV3) (p. 40)
AV2/AV3 out
Chooses the signal to be transmitted from the TV to Q-Link (Analogue / DVB / AV1 /
AV2 / AV3 / AV4 / Monitor)
Monitor: Image displayed on screen
Component, PC and HDMI signals cannot be outputted
Control with HDMI
Control with HDMI function (Off / On) (p. 42)
Teletext
Analogue teletext display mode (FASTEXT / List) (p. 19)
Off timer
Sets the time the TV automatically turns Off. (Off / 15 / 30 / 45 / 60 / 75 / 90) (minutes)
Volume correction
Adjusts volume for AV, PC, HDMI and component mode
Side panel
Increases the brightness of the side panel (Off / Low / Mid / High)
The recommended setting is "High" to prevent panel "after-image"
Power save
Reduces brightness of picture to economise on power consumption (Off / On)
Power on preference
Set to "TV" to view picture from TV tuner.
Set to "AV" to view input from an external equipment connected to a SCART terminal,
e.g. satellite receiver
(TV / AV)
The external equipment must be switched on and sending a control signal for
automatic switching at power on to occur
SD card LED
Lights blue LED while SD Card is inserted (Off / On) (p. 39)
Tuning Menu
Edits or sets channels (Analogue) (p. 32)
DVB Setup Menu
Timer
Programming
Records future programmes (p. 36)
Profile Edit
Creates list of favourite programmes (p. 29)
Child Lock
Locks a DVB programme channel to prevent access to it (p. 29)
DVB Tuning
Menu
Auto Setup, Add New Service, New Service Message, Signal Condition (p. 30)
DVB System
Setup
Common Interface Module, Preferred Subtitles, System Update, Display Timeout
(p. 26)
Multi Audio
Chooses the sub voice for watching DVB (Alternatives vary depending on the
broadcaster)
Owner ID
Inputs the owner ID (p. 35)
Shipping condition
Resets all settings, for example, when moving house (p. 34)
Main menu
Picture menu
Sound menu
Setup menu
Q-Link
Control with HDMI
Off timer
Tuning Menu
Owner ID
Shipping condition
Setup menu
AV2
On
AV2 out
Monitor
Off
SD card LED
On
Power on preference
TV
Teletext
FASTEXT
Power save
Off
Side panel
Off
Q-Link
AV2
Access
Tuning Menu
How to Use Menu Functions
Display menu
3
2
4
Displays the functions that can be set
(varies according to the input signal)
Note
To initialize all settings
"Shipping condition"
(p. 34).
To return to TV
at any time
To return to the
previous screen
Select "Setup menu"
Select the item
Adjust or select
change or access
store
(Required by some
functions)
Picture menu, Sound menu (p. 22)
select
select
access
Changed
Number and positions
of alternatives
Displays the next
screen
Choose from among alternatives
Go to the next screen
1
Menu list
How to Use Menu Functions
(picture, sound quality, etc.)
A different menu will be displayed while PC or SD Card is used. (p. 31 and p. 39)
In AV mode, the Setup menu gives a reduced number of options.
26
Advanced
27
Main menu
Picture menu
Sound menu
Setup menu
Setup menu
AV2
Q-Link
Off
Control with HDMI
On
AV2 out
Monitor
On
Access
SD card LED
TV
Power on preference
DVB Setup Menu
Owner ID
Shipping condition
Off timer
Power save
Off
Side panel
Off
Timer Programming
Child Lock
DVB Setup menu
Multi Audio
Access
DVB System Setup
eng
DVB Tuning Menu
Profile Edit
IDTV
English
3 seconds
Common Interface Module
System Update
DVB System Setup
Access
Display Timeout
Preferred Subtitles
English
3 seconds
Common Interface Module
System Update
DVB System Setup
Display Timeout
Preferred Subtitles
English
3 seconds
Common Interface Module
System Update
DVB System Setup
Display Timeout
Preferred Subtitles
English
3 seconds
Common Interface Module
System Update
DVB System Setup
Access
Display Timeout
Preferred Subtitles
Auto Update Search in Standby
Software Licence
System Update
On
System Update Search Now
DVB Settings
4
3
5
6
7
Select "Setup menu"
Select "DVB Setup Menu"
Select "DVB System Setup"
Display the menu
Select a function and set
Store
If you exit after , the setting is not stored after
turning off the TV.
To return to TV
(DVB mode)
access
select
1
If in Analogue mode
Select DVB
The "DVB Setup Menu" provides access to various advanced features.
DVB Settings (DVB)
(pay-TV, subtitles, etc.)
Pay-TV
Common
Interface
Module
System
Update
Update
TV's
software
system
select, go
Coloured characters
red
g
reen
yellow
blue
Select "Common Interface Module"
The Common Interface Module menu provides access to software contained on Common
Interface (CI) Modules.
Insert the CI module (optional)
(Rear of the TV)
CI slot
Insert or
remove
straightly
and
completely
CI module
access
Follow the on-screen instructions
example:
The features that appear on
screen are dependent on the
contents of the selected CI
module.
For more details, see the
manual of the CI module, or
check with the broadcaster.
On-screen operation guide
may not correspond to the
remote control buttons.
Caution
Turn Off MAINS power On / Off switch
whenever inserting or removing the CI
module.
If a view card and a card reader
come as a set, first insert the card
reader, then insert the view
card into the card reader.
Do not insert the module up side down.
Information
banner
display time
Display
Timeout
Select "Display Timeout" and set the time
0 (none displayed) to 10 sec.
in 1-sec. increments
set
select
Language
of subtitles
Preferred
Subtitles
Select "Preferred Subtitles" and set the language
To display subtitles (p. 13)
set
select
To update immediately
Select "System Update Search Now" Searches for an update (for several min.)
and displays a corresponding message if any
Downloads (for about 20 min.)
Select "System Update"
Select "Auto Update Search in Standby" and then select "On" or "Off"
On: Automatically performs
a search in standby and
downloads an update, if any
software updates are available
set
select
access
select
To view software licence information
Select "Software Licence" Display
Normally pay-TV services will appear without and
.
If pay-TV services does not appear, perform and
.
Download new software to TV.
For details (p. 47)
Set how long the information banner (p. 13) stays on screen
access
select
access
select
OK
2
If System Update is performed,
the software will be updated
(it may change TV functions).
If you do not wish to do so, set
"Auto Update Search in Standby"
to Off.
28
Advanced
29
Main menu
Picture menu
Sound menu
Setup menu
Setup menu
AV2
Q-Link
Off
Control with HDMI
On
AV2 out
Monitor
On
Access
SD card LED
TV
Power on preference
DVB Setup Menu
Owner ID
Shipping condition
Off timer
Power save
Off
Side panel
Off
Timer Programming
Child Lock
DVB Setup menu
Multi Audio
Access
Access
DVB System Setup
eng
DVB Tuning Menu
Profile Edit
IDTV
* * * *
Please enter new PIN
Child Lock-PIN Entry
PIN
Change PIN
Child Lock
Child Lock Service List
Access
Child Lock Service List
1 BBC ONE Wales
2 BBC 2W
7 BBC THREE
30 CBBC Channel
51 BBCi
89 BBC Radio Wales
90 BBC Radio Cymru
Profile Editor
1 BBC ONE Wales
2 BBC 2W
7 BBC THREE
10 BBC FOUR
30 CBBC Channel
31 CBeebies
All Services Profile 1
Profile Editor
1 BBC ONE Wales
2 BBC 2W
1 BBC 2W
7 BBC THREE
10 BBC FOUR
30 CBBC Channel
31 CBeebies
All Services Profile 1
yellow
Profile Edit / Child Lock
Select "Setup menu"
Select "DVB Setup Menu"
4
3
Select "Profile Edit" or
"Child Lock"
5
Display the menu
6
How to set
Your favourite channels can be listed, and control channel audience.
To return to TV
(DVB mode)
Control
channel
audience
Child Lock
List
favourite
channels
Profile
Edit
To change the PIN number
Select "Change PIN" in and enter a new PIN number twice.
You can lock specific channels and control who watches them.
(When a channel is selected, a message appears; by entering the PIN number, you can
watch the channel.)
select
Appears when the channel is locked
Enter the PIN number (4 digits)
Select "Child Lock Service List"
To cancel
Select the locked channel
To lock all channels
yellow
To cancel all channel locks
blue
Select the channel to be locked
Note
Setting "Shipping condition" (p. 34) or "DVB Auto Setup" (p. 30) erases the PIN number
and all settings.
Enter the PIN number twice at first
setting.
Make a note of the PIN number in
case you forget it.
To edit Profile
Select the field of Profile to edit and:
To name the Profile
red
To move the channel
green
Select the new
position
Confirm
green
To delete the channel
yellow
To delete all channels
blue
To add all channels
to the list
blue
Create your favourite channel list (Profile) from various broadcasters (up to 4: Profile 1 to 4).
The list is added to "Category" in TV Guide (p. 14) and information banner (p. 13) and then
easily accessed.
store
select
To change
the category
red
To display
another Profile
green
A channel is added
Select a channel and add it to the list
Store
Profile Edit / Child Lock
(DVB)
access
select
set
1
If in Analogue mode
Select DVB
access
select
access
select
access
select
Channel numbers (Known as logical channel numbers) cannot be changed, due to
broadcast restrictions.
2
30
Advanced
31
Menu
Item Adjustments / Configurations
DVB Tuning Menu
DVB Auto Setup
Automatically sets the DVB channels in the area.
The current setting is erased.
If a Child Lock PIN number (p. 29) has been set, it must be entered again.
Add New Service
Adds a new DVB service.
A new service is added to the DVB channel list, when found.
The new service is added with the current settings saved as they are.
New Service
Message
Selects whether to give a notification message
when a new DVB service is found.
(On / Off)
Selecting OK (Auto Setup) will delete current
Profile and Childlock settings.
Signal Condition
Select a channel and check the DVB signal
condition.
Use for adjusting the direction of the aerial.
Signal Quality:
Green bar Good
Yellow bar Poor
Red bar Bad (Check the aerial)
Menu Item Adjustments / Configurations (options)
Picture menu
Viewing mode, Contrast, Brightness, Sharpness, Colour balance (p. 23)
Advanced
setting
W/B High R White balance of bright red area
and
repeatedly adjusted
W/B High B White balance of bright blue area
W/B Low R White balance of dark red area
W/B Low B White balance of dark blue area
Gamma (2.0 / 2.2 / 2.5 / S Curve)
Setup menu
PC
setup
Input
resolution
Switches to a wide view
VGA (640 × 480 dots), WVGA (852 × 480 dots),
XGA (1,024 × 768 dots), WXGA (1,366 × 768 dots)
Options change depending on signals
Clock Set to the minimum level if noise occurs
H-pos
Adjusts horizontal position
V-pos
Adjusts vertical position
Clock phase
Eliminates flicker and distortion
Adjust after Clock adjustment
Set to the minimum level if noise occurs
Sync
Chooses another synchronous signal if the image is distorted (H&V / On G)
H&V : by the horizontal and vertical signals from your PC
On G : by the green signal from your PC (if available)
Control with HDMI, Volume correction, Side panel, Power save, SD card LED (p. 25)
Main menu
Picture menu
Sound menu
Setup menu
Timer Programming
Child Lock
DVB Setup menu
Multi Audio
Access
DVB System Setup
eng
DVB Tuning Menu
Profile Edit
DVB Auto Setup
New Service Message
DVB Tuning Menu
Access
On
Signal Condition
Add New Service
New DVB Service Found!
Press OK to start Auto Setup
Press EXIT to lgnore.
Warning! Selecting Auto Setup will delete
current Profile and Childlock settings
DVB Programme
0510
Signal Condition
CH30 1 BBC ONE Wales
Signal Strength
Signal Quality
HDMI1/2/3
DVB Tuning Menu
(DVB mode)
Select "Setup menu"
4
3
Select "DVB Tuning Menu"
5
Display the menu
Select
"DVB Setup Menu"
Select the function and access
6
change or access
You can re-tune all TV channels when moving house or search for new services which may have recently
started broadcasting.
No data is stored
if an Auto Setup
sequence is
interrupted.
To return to TV
1
If in Analogue mode
Select DVB
To return to TV
yellow
(Press twice)
Displaying PC Screen on TV
Select the external input
Select "PC"
2
The screen of the PC connected to the TV can be displayed on the TV.
You can also listen to PC sound with the audio cable connected. To connect PC
(p. 44)
Displays PC screen
Corresponding signals
(p. 48)
If "H-freq." or "V-freq."
is shown in red, the
signals may not be
supported.
PC menu setting (changed as desired)
To make settings "How to Use Menu Functions" to (p. 22)
Sound menu (p. 23)
Displaying PC Screen on TV
DVB Tuning Menu (DVB)
access
select
access
select
access
select
select
1
blue
2
To
next
page
32
Advanced
33
Main menu
Picture menu
Sound menu
Setup menu
Access
Q-Link
Control with HDMI
Off timer
Tuning Menu
Owner ID
Shipping condition
Setup menu
AV2
On
AV2 out
Monitor
Off
SD card LED
On
Power on preference
TV
Teletext
FASTEXT
Side panel
Off
Power save
Off
Programme edit
Auto setup
Manual tuning
Tuning Menu
Access
CH44
1
Manual tuning
21 68
-
, + : Search
TV / AV : Move cursor
STR : To store
F : To exit
STR F
-
STR F
-
/ + / TV / AV
AdDelete d DownloadMove
Programme edit
Prog. Chan. Name Lock
2 :
4 :
5 :
CH51
CH47
CH37
Off
Off
Off
XYZ
1 : CH44 OffABC
123
456
:3 CH41 OffFTP
Programme edit
Prog.
ABCDEFGHIJKLMNOPQRST
UVWXYZ+
-
. 0123456789
Chan. Name Lock
1 :
2 :
3 :
4 :
5 :
CH44
CH51
CH41
CH47
CH37
Off
Off
Off
Off
Off
XYZ
FTP
123
456
Programme edit
Prog. Chan. Name Lock
1 :
2 :
3 :
4 :
5 :
CH44
CH51
CH41
CH47
CH37
ABC
XYZ
FTP
123
456
Off
Off
Off
Off
Off
All analogue tuning
data will be erased
W ARNIN G
Exit
Return
Start Auto Setup
AU T O SETU P IN PROGRESS
SEARCHING : PLEASE W AIT
21 68
CH44
Exit
Return
Manual tuning
21 68
CH44
1
Exit
Search down/up
Return
Direct entry
Store
C
0 9
3 FTP
(Press repeatedly until "Tuning Mode" appears)
or (Access "Manual tuning")
(Select programme position or channel number)
Selected item will flash.
or (Change programme position or start searching channels)
(Store)
-
(Repeat)
Editing and Setting Channels
Select "Setup menu"
Select "Tuning Menu"
4
3
Select the function
5
Display the menu
6
How to set
For Manual tuning, using the buttons on
the front of the TV
("Manual tuning" on p. 33)
Programme
position (flash)
Channel number
(flash)
Channel
The analogue channel settings can be changed according to your needs and reception conditions.
To return to TV
To return to TV
1
If in DVB mode
Select Analogue
(Manual tuning screen)
Edit
channels
Delete
Add
Move
Change
name
Lock
Download to
equipment
Programme
edit
Set
automatically
Auto setup
Set
manually
Manual
tuning
(Analogue mode)
To download channel
information to a Q-Link
compatible equipment
connected to the TV
blue
Automatically
transmitted
(for a few sec.)
For details (p. 40)
To lock
To change the name of the broadcaster
displayed when selecting channels
Cursor
Usable characters
Select the
"Name" field
Select the
character
To next
character
Repeat
Select the
"Lock" field
Select "On"
Start Auto setup
start
Settings are made automatically
Select the programme position
and search through the channel
Store
search
Programme
position
Channel
Repeat
and
Select the channel to edit
Note
If a VCR is
connected with
only the RF
cable, select
programme
position "0".
Channel
Name
Edit
You cannot select the channel with numeric
buttons or the "C" button when locked.
Store
The settings are
downloaded to a Q-Link
compatible equipment
connected to the TV.
All previous settings are
erased.
If tuning has not done
completely
"Manual tuning"
The
programme
position
blinks.
Automatically set the channels received in the area
To freely change settings after Auto setup
To delete
red
After confirming, press
red
To add
green
After confirming, press
green
To move
yellow
Select new
position
yellow
Editing and Setting Channels
(Analogue)
Edit the analogue programme position settings
When the operation is completed,
the broadcast of programme
number "1" will appear.
"Off" to
unlock
)(
access
select
access
select
access
select
2
select
34
Advanced
35
Main menu
Picture menu
Sound menu
Setup menu
Q-Link
Control with HDMI
Off timer
Tuning Menu
Owner ID
Shipping condition
Setup menu
AV2
On
AV2 out
Monitor
Off
SD card LED
On
Power on preference
TV
Access
Teletext
FASTEXT
Power save
Off
Side panel
Off
0123456789
You now have the opportunity
to enter your details and
help the police crack crime
see instruction book
PIN NUMBER :
NAME :
POSTCODE :
Owner ID
HOUSE NO :
∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
∗ ∗ ∗ ∗
NAME : A
POSTCODE :
Owner ID
HOUSE NO :
Q-Link
Control with HDMI
Off timer
Tuning Menu
Owner ID
Shipping condition
Setup menu
AV2
On
AV2 out
Monitor
Off
SD card LED
On
Power on preference
TV
Access
Teletext
FASTEXT
Power save
Off
Side panel
Off
Main menu
Picture menu
Sound menu
Setup menu
All tuning data will be erased
Shipping condition
Exit
Return
Start
3
2
4
Select "Setup menu"
Select "Shipping condition"
Display the menu
How to set
To return to TV
Restore Settings
Check the message and initialise
Follow the on-screen instructions
"Auto Setup" will automatically start when MAINS power On / Off switch is next
turned On. (p. 10)
To re-tune TV channels only, e.g. after moving house
DVB: "DVB Auto Setup" (p. 30)
Analogue: "Auto setup" (p. 33)
Shipping
condition
Restore
Settings
set
Resets the TV to its original condition, i.e. no channels tuned in.
All settings other than "Owner ID" (channels, picture, sound quality, etc.) are reset.
Enter the 4-digit PIN number of your choice
Make a note of the PIN number in case you forget it.
Enter your name, address, and post code, in that order
Store
Owner ID
Input
owner ID
Owner ID
To change the stored information
Characters
Entry field
Select
the entry field
To check the "personal information" stored
Hold down for
about 6 sec.
Displays the information
on the screen
(for several sec.)
The PIN number is
not displayed.
Enter the
PIN number
-
Owner ID
Restore Settings
Select
character
To next
character
store
3
4
Select "Owner ID"
How to set
To return to TV
Entry of the security code (PIN number) and "personal information" (your name, address and post code).
In the unfortunate event of theft it will help the Police to determine the owner.
If you have skipped the Owner ID input in "Auto Setup" (p. 10), and input it later, start from
.
If you input the Owner ID in "Auto Setup" (p. 10), perform
.
(Press twice)
access
select
access
select
Select "Setup menu"
Display the menu
access
select
1
2
1
access
select
36
Advanced
37
DVB Timer Programming
Thu 05/08/04 18:49
1
3
BBC1
ITV1
6/8 FR
7/8 SA
18:00
21:30
20:00
22:30
120
60
Off
Off
Pos.
Name
Date Start End
min.
Main menu
Picture menu
Sound menu
Setup menu
Setup menu
AV2
Q-Link
Off
Control with HDMI
On
AV2 out
Monitor
On
Access
SD card LED
TV
Power on preference
DVB Setup Menu
Owner ID
Shipping condition
Off timer
Power save
Off
Side panel
Off
Timer Programming
Child Lock
DVB Setup menu
Multi Audio
Access
DVB System Setup
eng
DVB Tuning Menu
Profile Edit
Exit
Return
Select timer
Edit timer
Delete
DVB Timer Programming
Thu 05/08/04 18:49
0 9
1
3
BBC1
ITV1
6/8 FR
7/8 SA
18:00
21:30
20:00
22:30
120
60
Off
Off
Pos.
Name
Date Start End
min.
Recording Controls
Select "Setup menu"
Select "DVB Setup Menu"
4
3
Select "Timer Programming"
5
The Timer programming menu allows you to choose programmes that you wish to record. At the correct time, the DVB
system will switch on and tune to the correct station (even if the TV is in Standby mode). If the recording equipment is
compatible with Q-Link or similar technologies (p. 40) and connected to the TV’s AV3 terminal using a SCART cable
(p. 44), you do not need to programme the device – the DVB system will control the recording process.
TV Guide may also be used to set timer programmes. (p. 14)
Display the menu
6
How to set the details
To return to TV
To stop
recording
Timer Programming (DVB mode) from Menu
7
Store
1
If in Analogue mode
Select DVB
Set timer
programming
details
Caution
The TV must either be On or in standby.
For preparations of a recording equipment, read the manual of equipment.
No other DVB channel can be selected during recording. However you can watch analogue channels.
It may not be possible to record an encrypted programme (which is copy-protected).
Note
Confirm the DVB LED lights (Orange). If not, a timer programming is not available. Press the TIMER button to be On.
A message will appear if you try to programme a timer event which overlaps an already programmed event.
2 min. before the starting time: a reminder message appears.
(To remove the message OK button; To cancel the programming EXIT button)
10 sec. before the starting time: in DVB mode, the TV automatically selects the programmed channel.
Cancelling the programming may not be valid immediately before the starting time. In this case, directly operate
the recording equipment to cancel recording.
Please set the Starting time more than 2 minutes interval from the present time. If you want to record, use Direct
TV recording (p. 40).
set
select
the item
Channel
Previous
timer
programming
event
Date
Starting
time
Ending
time
Subtitles
(Off / Auto)
one day ahead
daily or weekly
(press repeatedly)
Select the programme to be changed using and press
Correct as necessary (as above)
Repeat the operations as below,
and set items in the order of
to
Recording time
(automatic display)
Daily SU-SA: Sunday to Saturday
Daily MO-SA: Monday to Saturday
Daily MO-FR: Monday to Friday
Weekly SA/FR/TH/WE/TU/MO/SU:
Same time on the same day every week
To change a timer programming event
To cancel a timer programming event
Select the programme to be deleted using and press
red
, and can
also be entered
with numeric
buttons.
start
Start making
the settings
Recording Controls
access
OK
2
access
select
access
select
Direct TV recording:
You can record the current programme to DVD Recorder or VCR immediately. (p. 40)
TV Guide–Electronic Programme Guide (EPG)–Timer Recording
Operate and in p. 14 (mode and Guide switches)
DVB LED
(Timer
Programming
screen)
To check / change / cancel a timer programming event "Timer Programming" (above)
Orange DVB LED
(Rapid blinking during recording)
set
select
8
Turn On the DVB LED
Orange DVB LED
To cancel a reserved
programme
(DVB LED Off)
Current timer
programming
event
Select the programme to
be broadcast
There are two styles of display for TV Guide (Landscape / Portrait)
Turn On the DVB LED
38
Advanced
39
EXITMENU
SD CARD
HOLD
PHOTO
VIEW MODE
1/19
Filename
100-0001
Date 01/01/2001
Pixel 15X16
Select
Select
SD CARD : Return
Slide show
Exit
View
100-0001 100-0003 100-0004
100-0005 100-0008 100-0009
100-0010 100-0012 100-0016
Cannot
read file
Select
Rotate
Exit
List
100-0001
Interval
Viewing setup
5sec
Repeat
Off
Main menu
Picture menu
Viewing setup
SD CARD
red
Slide show
red
For details, see p. 39
Viewing from card
The still images recorded by the digital camera will be displayed.
View
4
Insert the SD Card
For details on SD Cards,
see p. 48.
Select the photo to be viewed
3
Displayed one at a time
To previous photo
To thumbnail
Rotate 90˚ (clockwise)
To next photo
1
2
Select SD mode (PHOTO VIEW MODE)
select
view
Rotate 90˚
(anti-clockwise)
Operation
guide
(Thumbnail screen)
Caution
During the operation, no signals are output from the monitor output terminals.
"Date" shows the date on which the recording was made by the digital camera. It
shows "**/**/****" when recordings are made without date signal.
To return to
thumbnail screen
SD CARD
To return to TV
SD
Card
Label surface
(Photos)
To open
Start Slide show (operate in step )
Slide show settings (operate in step or )
Viewing from card (Photos)
Open the cover
Press
Push until a
click is heard
To remove
To insert
Press the centre of the card
Error display
(images that could not be loaded, etc.)
Selected
photo
To display the operation guide
Slide show
Select the photo for the first view Start Slide show
Display the
menu
Select "Viewing setup" Select the functions and set
access
select
"Picture menu" (p. 23)
Menu Item Adjustments / Configurations (alternatives)
Viewing
setup
Interval Select slide show interval (5 / 10 / 15 / 30 / 60 / 90 / 120sec)
Repeat Slide show repeat (Off / On)
Blue LED
Note
Blue LED lights while SD Card is inserted if set "SD card LED" to "On" in Setup menu (p. 25).
set
select
Cautions in handling SD Card
Do not remove the card while the TV is accessing data (this can damage card or TV).
Do not touch the pins on the back of the card.
Do not subject the card to a high pressure or impact.
Insert the card in the correct direction (otherwise, card may be damaged).
Electrical interference, static electricity, or erroneous operation may damage the data or card.
Back up the recorded data at regular intervals in case of deteriorated or damaged data or erratic operation of the
TV. (Panasonic is not liable for any deterioration or damage of recorded data.)
Message Meaning / Action
On screen messages
Cannot read file
The file is broken or unreadable.
The TV does not support the format.
(For the applicable formats and data, see p. 48.)
Is SD Card in?
Insert a SD card.
No valid file to play
The card has no data.
Selected photo
information is displayed
To stop in mid-cycle
SD CARD
To pause
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28

Panasonic TH65PX600B Operating instructions

Category
LCD TVs
Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI