Stack Rack Instructions
This drawing illustrates the assembly
of the Stack Rack with the upper and
lower units. It will not look exactly like
this because of the many different
combination of units available.
The units can be placed on with or
without screws. If screws are used
you will have to drill (8) 1/8" holes
thru the holes in the Stack Rack
and use the (8) screws provided.
2/9/12
Summit Appliance
STACK RACK
INSTRUCTIONS
This drawing illustrates the assembly of
the Stack Rack with the upper and lower
units. It may not look exactly like this
because of the many different combination
of units available.
The units can be placed on with or without
screws. If screws are used, mount the (8)
self-tapping screws provided through the
holes in the Stack Rack.
770 Garrison Avenue Bronx, NY 10474 USA TEL 718-893-3900 FAX 718-842-3093 [email protected] www.summitappliance.com
SUMMIT APPLIANCE DIVISION FELIX STORCH, INC.
/