aTTo Digital MICFD25 User manual

Brand
aTTo Digital
Model
MICFD25
Type
User manual

aTTo Digital MICFD25 is an easy-to-use device that will allow you to record both video and audio. It is small and light, so you can take it with you wherever you go. With a 61° view angle, it will capture everything you need, and thanks to the AVI format and 25 fps frame rate, your videos will be of high quality. The device supports TF cards from 1GB to 16GB, allowing you to store plenty of footage. The 280-300mAh battery will provide you with up to 4.5 hours of video recording or 25 hours of voice recording on a single charge. You can easily connect the device to your computer via USB 2.

aTTo Digital MICFD25 is an easy-to-use device that will allow you to record both video and audio. It is small and light, so you can take it with you wherever you go. With a 61° view angle, it will capture everything you need, and thanks to the AVI format and 25 fps frame rate, your videos will be of high quality. The device supports TF cards from 1GB to 16GB, allowing you to store plenty of footage. The 280-300mAh battery will provide you with up to 4.5 hours of video recording or 25 hours of voice recording on a single charge. You can easily connect the device to your computer via USB 2.

Please Read User’s Manual before first use!
USB Camcorder User’s Manual
Thank you!
USB Disk Camcorder
BEFORE USING IT PLEASE INSERT TF CARD SLOT/SD
MEMORY CARD!
Operation Instructions
◆ Turning ON/OFF: Long press (press and hold) VIDEO button
about 3 seconds, the indicative light becomes red and the recorder
goes to STAND-BY mode.
To turn OFF, long press again the VIDEO button, the indicative red
light switches OFF.
◆ Video Recording: In standby mode press VIDEO button to start
taking video, the indicative light turns blue and blinks.
Press again VIDEO button to stop video recording and save the
video file, the light turns red and the recorder enter again to standby
mode.
◆ Audio Recording: In standby mode press REC button to start
recording, the light turns and remains blue.
Press again REC button to stop and save, the light turns red and the
recorder returns to standby mode.
◆ Playback: First, please TURN OFF the spy device, and then plug
into your computer’s USB port.
Access the spy USB stick memory (from the pop-up window that
appears when plug-in or from My Computer partition), then open the
recordings folder or transfer the files to your computer and play
those files using any media player (BSPlayer, VLC Player, Windows
Media Player, etc.)
◆ Setting time:
1. Connect the USB device to your computer.
2. Access the memory stick.
3. Create a .txt file (right click > Select New > Text Document)
4. Rename this file "time"
5. Access and open this file
6. Manually write in the .txt file, the date and time of that moment in
this type of format:
yyyy-mm-dd hh:mm:ss
(example: 2017-03-29 09:58:16)
7. Save the date and time with Ctrl+S saving command
After these steps, your recorder will be sync with the date and time
you’ve completed.
◆ Charging: First turn OFF the spy gadget, then connect it to a
computer for about 3 hours for charging. When charging the red
light blinks, when fully charged the light remains red.
◆ Reset:
Push a needle in the little RESET hole.
Precautions:
! Removing the USB stick without first logging it off from the
computer can cause irreparable damage to the gadget. Please
always SAFE REMOVE from your computer!
1. While working if the recorder has no response to any operations
please press RESET hole to reboot the product.
2. Please backup the files regularly onto the computer.
3. We are not responsible for the recording or video failures which
caused by misuse or damage of the recorder.
4. Please do not disassemble the recorder by yourself. Please backup
files before sending for repair. We are not responsible for the
information loss caused by repair.
5. We are not responsible for the user’s voice or video recording
without other’s approval. We endeavor to ensure the manual’s
integrity. For technical and other reasons if the contents do not
match, please take the product as standard. We reserve the right to
modify the design and specifications without prior notice.
◆ Technical data:
For any technical support you can always contact us on:
Email: attodigitaleu@gmail.com
Website: www.atto-digital.com
Please check the ultimate intelligence gadgets in our store!!!
Best regards,
aTTo Digital team
Image
CMOS 0.3 Mega Pixels
View Angle
61°
Video format
AVI
Video resolution
VGA: 640*480
Video frame rate
25 fps
Recording format
PCM
Recording bit rate
128Kbps
TF card support
1GB-16GB, Video 1.1-2.4GB per hour,
Recording about 55MB per hour
Battery
280-300mAh
Working time
(once fully charged)
Taking video about 4.5 hours,
Voice recording about 25 hours
USB Interface
USB2.0 (USB1.1 compatible)
System support
Windows2000/XP/Vista/7
Charging time
2-5 hours
Weight
20g
Dimensions
74mm×26mm×12mm
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

aTTo Digital MICFD25 User manual

Brand
aTTo Digital
Model
MICFD25
Type
User manual

aTTo Digital MICFD25 is an easy-to-use device that will allow you to record both video and audio. It is small and light, so you can take it with you wherever you go. With a 61° view angle, it will capture everything you need, and thanks to the AVI format and 25 fps frame rate, your videos will be of high quality. The device supports TF cards from 1GB to 16GB, allowing you to store plenty of footage. The 280-300mAh battery will provide you with up to 4.5 hours of video recording or 25 hours of voice recording on a single charge. You can easily connect the device to your computer via USB 2.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents